• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 춘계학술대회 논문집
• /
• pp.420-424
• /
• 1994

상품의 다양화 추세에 따라 생산형태가 다품종 소량화가 되고 복잡한 가공공정을 갖는 공작물이 꾸준이 증가하고 있어 이를 뒷바침 하는 복합 가공공정과 복합 다기능 공작기계의 기술개발이 어느때 보다 중요한 과제로 등장하고 있다. 본 연구에서는 기존의 주축베어링 시스템의 장단점을 보완하여 주축의 정.동특성 및 고속성을 개선할 수 있는 볼베어링과 유정압베어링의 복합베어링 시스템을 주축베어링 으로 제안하고 그 성능을 이론적으로 실험적으로 검증하기 위해 복합베어링 주축과 기존 주축의 동특성 변화를 분석하였다.

• 한국자기학회지
• /
• 제21권6호
• /
• pp.204-207
• /
• 2011

본 연구에서는 극초고속 시간 대역의 자성 동역학을 탐구하기 위해, 시간 분해능을 가진 주사식 광자기 현미경을 개발하였다. 타이타늄:사파이어 레이저를 펌프-프루브 방식으로 사용하여, 0.1 피코초의 시간 분해능을 확보하였다. 이를 이용하여 Co 층의 두께를 바꾸어가며 Pt/Co/Pt 자성 박막 시료에서의 자성 동역학을 측정하였다. 펌프 레이저로 시료를 직접 가열하는 경우, 모든 시료는 수 피코초 내에 탈자화가 일어났다. Co 층이 두꺼운 두 시료에서는 자화의 세차 운동을 관측할 수 있었고, 란다우-리프쉬츠-길버트 방정식으로부터 각 시료의 길버트 감쇠 상수를 구하였다.

• 열처리공학회지
• /
• 제30권6호
• /
• pp.271-278
• /
• 2017

This study was carried out to investigate the relationship between the mechanical properties and damping capacity of thermo-mechanical treated 316L stainless steel. Dislocations, ${\varepsilon}$ and ${\alpha}^{\prime}$-martensites were formed by thermo-mechanical treatment, and the grain size was changed from micrometer to sub-micrometer by 5-cycled thermo-mechanical treatment. The volume fraction of dislocations, ${\varepsilon}$ and ${\alpha}^{\prime}$-martensites was increased, and grain size of austenite increased and lengthened by the with increasing cycle number of thermo-mechanical treatment. In 5-cycled specimens, the volume fraction of ${\alpha}^{\prime}$-martensite was more than 25% and the less than 5% of volume fraction of ${\varepsilon}$-martensite was attained. With increasing number of thermo-mechanical treatment, hardness, strength and damping capacity were increased, but elongation was decreased. Damping capacity was increased with increased hardness and strength, but decreased with increased elongation, and this result was the opposite tendency for general metal.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.129-134
• /
• 2018

This study was carried out to investigate the effect of grain size on the damping capacity of the Fe-26Mn-4Co-2Al damping alloy. ${\alpha}^{\prime}$ and ${\varepsilon}-martensite$ were formed by cold working, and these martensites were formed with a specific direction and surface relief. With an increase in grain size, the volume fraction of ${\alpha}^{\prime}$ and ${\varepsilon}-martensite$ increased by decrement the austenite phase stability. This volume fraction more rapidly increased in cold-rolled specimen than in the specimen that was not cold-rolled. The damping capacity also increased more with the augmentation an increased grain size and more rapidly increased in cold-rolled specimen than in the specimen that was not cold rolled. The effect of grain size on the damping capacity was larger in the cold-rolled specimen than the specimen that was not cold-rolled. Damping capacity linearly increased with an increase in volume fraction of ${\varepsilon}-martensite$. Thus, the damping capacity was affected by the ${\varepsilon}-martensite$.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.70-75
• /
• 2015

The influence of reversed austenite on the damping capacity in austenitic stainless steel with two phase of martensite and reversed austenite was investigated. The two phases of deformation induced martensite and reversed austenite was obtained by an reverse annealing treatment at $500^{\circ}C{\sim}700^{\circ}C$ for various time after 70% cold rolling. With an increase of the reverse annealing treatment temperature and time, volume fraction of reversed austenite was rapidly increased. With an increase of volume fraction of reveresd austenite, damping capacity was rapidly increased. At same volume of reveresd austenite, damping capacity of reversed austenite obtained by reverse annealing treatment at $700^{\circ}C$ for various time was higher then reveresd austenite obtained by reverse annealing treatment at $500^{\circ}C{\sim}700^{\circ}C$ for 10min. Thus, the damping capacity was affected greatly by reversed austenite obtained by annealing treatment at $700^{\circ}C$ for various time.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.407-410
• /
• 2005

고성능 액체 로켓엔진에서 일반적으로 사용되는 기체-액체형 분사기가 장착된 연소실의 음향장을 수치적으로 해석하였다. 해당 분사기는 반파장 공명기의 역할을 할 수 있다. 다수의 공명기가 장착된 경우 연소실과 분사기간의 음향학적인 연계성으로 특이한 음향학적 특성이 관측되었다. 분사기 길이가 반파장 공명기 길이에 도달함에 따라 분사기와 연계된 새로운 음향 모드가 나타났으며, 그 음향 모드의 감쇠인자는 상당히 작았다. 따라서, 분사기의 음향감쇠 효과를 최적화 하려면 본래의 반파장 길이보다 약간 작은 길이를 갖도록 해야함을 알았다.

• 한국주조공학회지
• /
• 제21권2호
• /
• pp.119-126
• /
• 2001

Al/15%Gr. composite have been manufactured by mixing, compacting, and extruding aluminium powder and graphite powder. Then, Al-6%Si/x%Gr., Al-12%Si/x%Gr., and Al-18%Si/x%Gr.(x: 0, 2, 4, 6, 8) composites have been manufactured by remelting the extruded materials(Al/15%Gr.), Al-33.3%Si alloy, and Al ingot, etc. We conducted experiments to chracterize the microstructure, and damping properties and hardness. The result of microstructure experiment on Al-x%Si/y%Gr. composites reveals the good dispersion of graphite. As to Al-Si/y%Gr. composites, the more the graphite contents, the less the tensile strength. And the tensile strength varied according to contents of Si: with its highest value in Al-18%Si/y%Gr. composites and lowest in Al-6%Si/y%Gr. composites. As to Al-x%Si/y%Gr. composites, the more the contents of graphite, the more the vibration damping properties. And we can get the highest vibration damping rate in Al-12%Si/y%Gr. composites which matrix structure is an eutectic component.

• 한국재료학회지
• /
• 제26권9호
• /
• pp.493-497
• /
• 2016

This study was carried out to investigate the effect of deformation induced martensite on the damping capacity of Fe-26Mn-4Co-2Al damping alloy. ${\alpha}^{\prime}$ and ${\varepsilon}$-martensite were formed by cold working, and; deformation induced martensite was formed with according to the specific direction and the surface relief. With an increasing degree of cold rolling, the volume fraction of ${\alpha}^{\prime}$-martensite increased rapidly, while the volume fraction of ${\varepsilon}$-martensite decreased after rising to a maximum value at a specific level of cold rolling. Damping capacity was increased, and then decreased with an increasing of the degree of cold rolling. Damping capacity was influenced greatly by the volume fraction of ${\varepsilon}$-martensite formed by cold working, but the effect of the volume fraction of ${\alpha}^{\prime}$-martensite have a actually on effect on the damping capacity.

• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.1-6
• /
• 1984

본 논문은 주파수에 의존하는 감쇠를 보상하고 해석신호의 크기를 이용하여 충실하게 포락선 검파를 행하므로써 거리분해능의 향상을 가져을 수 있음을 다룬다. 해석신호의 크기를 계산하는 것이 재래적 방식에 비해서 나은 결과를 보이고 있으며 또한 제안된 방식이 A-mode에서 근접한 두 경계면을 전술한 방식들보다 더 잘 구분할 수 있음을 알 수 있다. 실험결과 3.5MHz의 트랜스듀서를 사용하여 0.5mm의 거리분해능을 얻었다. 이 방식은 의료나 비파괴 검사에 응용될 수 있을 것이다.

• 동력기계공학회지
• /
• 제17권2호
• /
• pp.114-120
• /
• 2013

This study was carried out to investigate the relationship between mechanical properties and damping capacity in high manganese austenitic stainless steel with two phase mixed structure of reversed austenite and deformation induced martensite. Reversed austenite of ultra-fine grain size less than $0.3{\mu}m$ was obtained by reversion treatment. Two phase structure of deformation induced martensite and reversed austenite was obtained by annealing treatment at range of $500^{\circ}C{\sim}700^{\circ}C$ for various time in cold rolled high manganese austenite stainless steel. In stainless steel with two phase mixed structure of martensite and austenite, damping capacity decreased rapidly with the increasing hardness and strength. With the increasing elongation, damping capacity was increased rapidly and then, slowly increased.