• Polymer(Korea)
• /
• 제33권6호
• /
• pp.581-587
• /
• 2009

PLA/PEG blend fibers composed of poly (lactic acid) (PLA) and poly (ethylene glycol) (PEG) were prepared via melt blending and spinning for bioabsorbable filament sutures. The blend fibers hydrolyzed with the immersion in a phosphate buffer solution at pH 7.4 and $37\;^{\circ}C$ for 1~8 weeks. The effects of blending time, blend composition, and hydrolysis time on the weight loss and tensile strength of the hydrolyzed blend fibers were investigated. After hydrolysis, the weight loss of the blend fibers increased with increasing PEG content, blending time, and hydrolysis time. The tensile strength and tensile modulus of the blend fibers decreased with increasing PEG content, blending time, and hydrolysis time. Therefore, it can be concluded that the weight loss of the PLA/PEG blend fibers was less than 0.9% even at hydrolysis time of 2 weeks and their strength retentions were over 90%.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제15권1호
• /
• pp.134-142
• /
• 2007

In this study the physico-chemical characteristics of solid waste and the thermagravimetric analysis of waste investigated. It was found that the combustible component, water and ash were 61%, 32%, 7% respectively. The amount of combustible component was much higher than those of others. It was shown that the total carbon and hydrogen of the waste 94% and the high heating value was 2897,883(Kcal/kg). The thermagravimetric analysis showed that the weight loss of wastes occurred as temperature increased, and the rate was higher in the temperature range of $300^{\circ}C$ to $500^{\circ}C$.

• The Korean Journal of Applied Statistics
• /
• 제27권7호
• /
• pp.1115-1123
• /
• 2014

The main purpose of phase I clinical trials is to estimate the Maximum Tolerated Dose (MTD), which minimizes side effect and assures safety of a new drug by evaluating the toxicity at each dose-level. The conventional MTD estimation methods is Standard method (Storer, 1989; Korn et al., 1994), Accelerated Titration Designs (Simon et al., 1997) and DM method (Dixon and Mood, 1948) etc. In this paper, MTD estimation method with de-escalation is suggested phase I clinical trials. The proposed MTD estimation method is compared to Accelerated Titration Designs, SM3 without de-escalation method and SM3 with de-escalation method using a Monte Carlo simulation.

• Textile Coloration and Finishing
• /
• 제7권3호
• /
• pp.11-14
• /
• 1995

Effect of low temperature oxygen plasma treatment on the weight loss of poly (ethylene terephthalate) fiber heat-treated at various temperatures was studied using two kinds of plasma apparatus. Investigation was done on the basis of the increased crystallinity up to about 160 $^{\circ}C$, above this temperature weight loss increased significantly with the increased crystallinity in spite of crystallinity increased according to the increased heat-set temperature. The weight loss showed a minimum at about 160 $^{\circ}C$ just like in dyeing of poly(ethylene terephthalate) fiber with disperse dye.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제29권3호
• /
• pp.35-40
• /
• 2021

In order to investigate the degree of solubilization of sewage sludge using sono-activated persulfate(UV/PP), VSS reduction rate, solubilization rate and extracellular polymeric substances were measured. Ultrasonic(US) and alkali·ultrasonic method using sodium hydroxide(US/SH) were compared. Under the persulfate·ultrasonic conditions, the VSS reduction rate and the solubilization rate increased to 27.6% and 58.9%, respectively. TB-EPS as Carbohydrate and Protein were extracted by 770 mg/L and 2,162 mg/L. Compared to the other methods, US and US/SH, the VSS reduction rate and solubilization rate were higher. And also, according to the TB-EPS values, cell wall destruction was more efficient.

• Journal of the Korean GEO-environmental Society
• /
• 제12권5호
• /
• pp.37-42
• /
• 2011

The main objective of this study was to evaluate the current condition of harbor sediments and to estimate biochemical methane potentials from the harbor sediments. Sediment samples were collected from 10 different sampling sites. Ignition loss, elemental analyses, X-ray diffraction(XRD), X-ray fluorescence(XRF) tests were conducted to determine characteristics of the sediment. All sediments had similar elemental compositions and ignition loss were 8~10%. From the conventional BMP tests for 5 samples, cumulative methane production ranged from 11.9~15.5mL methane/(g of volatile solids), which were significantly lower than that for foods and paper. However, methane production rates for sediments were 5 to 20 times faster than those for foods and paper.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.103-109
• /
• 2010

Anaerobic digestion has been widely used for the treatment of sludge, which is generated from the municipal and industrial wastewater treatment, for its volume reduction and methane production. Many researches on sludge pre-treatment have been carried out in order to enhance the performance of anaerobic digestion by increasing the hydrolysis of sludge which is the rate limiting step of anaerobic digestion. In this study, the effect of pre-treatment on sludge hydrolysis(solubilization), methane production and sludge reduction by anaerobic digestion after thermal, ultrasonic, and thermal-alkali sludge treatment were compared. Thermal-alkali treatment showed 67 and 70% solubilization with municipal and industrial wastewater sludge, respectively, while ultrasonic treatment and thermal treatment gave similar solubilization efficiency of 40% or more. Methane content of the anaerobic digestion gas reached 45~70% and pretreated sludge gave higher methane content than the control sludge. Methane production of thermal, ultrasonic, and thermal-alkali pre-treatment gave 2.6, 2.7, 3.5 times of municipal control sludge and 3.5, 4.1, 4.2 times of industrial control sludge, respectively. Sludge reduction of pre-treated sludge after anaerobic digestion gave 5~19% point higher than that of control sludge, and thermal-alkali treatment showed higher reduction efficiency than thermal and ultrasonic treatment. The results proved that pre-treatment contributed significantly not only for the methane production but also for the cost reduction of sludge treatment and disposal, and thermal-alkali treatment gave the best performance for the sludge treatment.

• Food Science of Animal Resources
• /
• 제27권1호
• /
• pp.73-79
• /
• 2007

We investigated the effects of dietary supplements such as probiotics, illite, active carbon and hardwood vinegar on growth performance and meat quality characteristics in finishing pigs. One hundred fifty pigs ($Landrace{\times}Yorkshire{\times}Duroc$; $32.3{\pm}1.3 kg$ average initial body weight) were used for a 100 day experiment. Pigs were randomly placed into one of five experimented diet groups (control, 0.2% probiotics, 1.0% illite, 1.0% active carbon, and 1.0% hardwood vinegar) and were slaughtered at approximately 110 kg live weight. The addition of 1.0% active carbon and hardwood vinegar caused a decrease in free water while, WHC (water holding capacity) was higher compared with controls. Drip loss in hog flesh was decreased by feeding probiotics, illite, active carbon and hardwood vinegar. Cooking loss was decreased when hogs were fed hardwood vinegar. Lightness ($L^*$) and redness ($a^*$) were no difference between the all treatment groups, yellowness ($b^*$) was higher when feeding active carbon and hardwood vinegar by 1.0%. When hogs were fed hardwood vinegar, drip loss was decreased, and meat color was higher in sensory evaluation of fresh meat. In cooked hog meat, meat color and juiciness were higher in hogs fed hardwood vinegar. These results showed that supplementing hog diets with 1.0% hardwood vinegar may noticeably improve the meat quality of finishing hogs.

• Journal of Korean Society of Environmental Engineers
• /
• 제33권1호
• /
• pp.54-59
• /
• 2011

This test established the bioavailability and sample input by mixing the maintaining the microbial machine parts and food waste leachates in weight of 2:1 as advanced experiment, maintaining the constant temperature, agitating and observing its weight and property change for 60 hours. And, I injected daily the established microbial machine parts and food waste leachates rate, maintained the temperature in the reactor with $55{\sim}65^{\circ}C$, and agitated with constant speed. I studied the recycling possibility of food waste leachates by extracting the sample after 24 hours, verifying its characteristics, and repeating the food waste leachates input and sample extraction for about 40 days. Considering all about the results of this study, I saw that 87.32% of food waste leachates was reduced, and the solid of bluebug or food included in the food waste leachates was decomposed within 24 hrs. pH for 43 days after 9 days of stabilization period was maintained from 3.7~3.9 and the ignition loss from 88.67~87.3%, and the quantity of organic matter from 77.6~80.88%. With the similar result daily maintained, it is considered to progress more the minimization by inputting the future food waste leachates. C/N rate satisfies the less than 25 that is the composting basis within 8 days, maintaining between 13~15, with 2% of salt not exceeded, it is able to recycle as the compost of food waste leachates as based on the composting with no extracted heavy metal content.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.500-500
• /
• 2016

전국의 농업용 저수지 중 장기간 높은 유기물 및 영양염의 농도로 인해 부영양화가 우려되는 71개 저수지에 대하여 수질오염 및 퇴적물오염 특성을 분석하였다. 수질오염 특성 분석 결과, 평균농도가 COD 11.7 mg/L, TOC 6.8 mg/L, TN 1.844 mg/L, TP 0.101 mg/L, SS 18.1 mg/L, Chl-a 57.3 mg/$m^3$ 로 분석되었다. 조사 대상 저수지 71개 지구 중 COD 46.3 %, TN 84.4 %, Chl-a 63.7 %가 농업용수 수질기준 초과 저수지로 조사되었다. 또한 연구 대상지구의 주요 오염원으로 생활계오염원 31개 저수지의 COD 11.1 mg/L이며, 축산계오염원 40개 저수지의 COD 12.2 mg/L로 나타났다. 각 항목의 수질 결과에 대한 평균 오염도를 분석한 결과, 축산계 오염원이 생활계 오염원 저수지보다 부유물질(SS)을 제외하고 모든 항목에서 오염도가 높게 나타났다. 그러나 TN, TP는 오염원에 따라 크게 차이를 보이지는 않았으며, 축산계 오염원 저수지의 수질 오염도는 모든 항목에서 농업용수 수질기준을 초과하였다. 장기적인 수질오염 저수지에 대하여 퇴적물의 오염 특성을 조사하였으며, 퇴적물오염으로 인한 수질오염 영향관계를 조사 분석하였다. 퇴적물 오염 특성 분석 결과, 강열감량 10.5 %, 총질소 3,480 mg/kg, 총인 1,299 mg/kg으로 오염 수준이 전체적으로 높게 조사되었다. 생활계오염원 31개 저수지의 강열감량 9.8 %, 총질소 2,711 mg/kg, 총인 1,178 mg/kg이며, 축산계오염원 40개 저수지의 강열감량 11.1 %, 총질소 4,076 mg/kg, 총인 1,393 mg/kg로 나타났다. 수질 중 COD, TOC, TN, TP, SS, Chl-a의 오염도와 퇴적물중 강열감량, 총질소, 총인의 각 항목간 상관관계를 분석한 결과, 퇴적물 내 다른 항목에 비해 SS를 제외하고 총인이 모든 수질 항목과 정(+)의 상관관계를 나타내었다. 특히 퇴적물 중 총인과 수질의 TP가 가장 높은 상관성을 나타내는 것으로 조사되었는데, 이는 퇴적물 내 총인이 수질오염에 가장 많은 영향을 줄 수 있으며, 상호작용이 있음을 의미한다고 하겠다. 또한 수질의 TP 오염도에 따라 부영양화 및 조류의 활성화가 크게 영향을 받는다는 기존의 연구결과에 의하면 퇴적물 내 총인의 오염도가 부영양화와 조류 번식에 영향을 크게 미칠 것이라 판단된다.