• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.260-268
• /
• 1985

An acephalic budding Cysticercus of 1.2 cm long was removed surgically at the abdominal wall of a Korean man. The worm revealed abnormal buds on the bladder wall and absence of suckers and hooklets in the scolex body. The buds were of two histologic types; branching bud covered with normal tegumentum and with subtegumental cells of normal density, and buds of proliferated subtegumental cells with lacunae formation. On the bases of the morphologic features, it was identified as a racemose cysticercus. This case confirms that its extracranial location is possible.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.179-182
• /
• 2009

Purpose: Point fixation at the margin of the glenoid is a limitation of conventional arthroscopic stabilization using suture anchors, and does not afford sufficient footprint healing, especially in glenoid bone deficiency. So, we introduce an arthroscopic suture bridge transosseous-equivalent technique for bony Bankart lesions to avoid the technical disadvantage of point contact with anchor fixation and to improve mechanical stability through cross compression of the labrum. Surgical approach: The technique was adapted from the transosseous-equivalent rotator cuff repair technique using suture bridges, which improved the pressurized contact area and mean pressure between the tendon and footprint. After preparation of the glenoid bed by removal, reshaping, or mobilization of the bony lesion, two anchors (3.0 mm Biofastak, $Arthrex^{(R)}$, Naples, FL) were inserted into the superior and inferior portion of the bony Bankart lesion. Using a suture hook, medial mattress sutures were applied around the capsulolabral portion of the IGHL complex to obtain sufficient depth of glenoid coverage. A 3.5 mm pushloc anchor ($Arthrex^{(R)}$, Naples, FL) hole was made in the articular edge of the anterior glenoid rim. distal, suture bridge was applied, and proximal was inserted to mobilize the labrum in the proximal direction. This avoided the technical disadvantage of point contact with anchor fixation and decreased the level of gap formation through cross-compression of the labrum.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.243-250
• /
• 2023

Both ends of the hoop reinforcement in the reinforced concrete (RC) columns subjected to lateral loading must necessarily be bent by 135° so as to ensure a sufficient level of ductility. However, as this reinforcement is extremely difficult to construct, this requirement is often not satisfied at construction sites. This study entailed an experimental investigation on RC columns subjected to cyclic lateral loading equipped with steel clip-type implements that were developed to replace the complicated 135° hoop reinforcement details. Four RC column specimens were manufactured, and the main test parameters included the use of high-strength concrete and steel clip-type implements. Furthermore, three-dimensional finite element models were employed to evaluate the structural performances of the test specimens via nonlinear analyses. The results of the test and finite element analyses indicate that the RC columns with the steel clip-type implements exhibit structural performances equal to or better than those with the 135° hoop reinforcement details. Further, the finite element analysis results agree well with the test results.

• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.14-20
• /
• 2009

Purpose: This study examined the clinical results of the treatment of type 2 distal clavicle fracture with using a Wolter plate. Materials and Methods: Between 2004 and 2007, 16 patient treated for type 2 distal clavicle fracture using a Wolter plate were included in this study. Their average age was 32.6 years and the postoperative mean follow-up period was 22.9 months. The reduction and union were qualified according to the immediate post-operative and final radiographs. The functional outcome was evaluated by Kona's system and the Constant score Results: By Kona's functional evaluation, there were 12 cases with excellent results, 3 cases with good results and 1 case of fair results and the average Constant score was 90. All 16 cases showed bony union. As complications, there was 1 case in which the protruded hook of the plate could be palpated at the skin, and 1 case showed an acromial fracture, but all the cases dispalyed successful bony union and there was no acromioclavicular joint arthritis, infection or any other complications. Conclusion: Wolter plate fixation for type 2 distal clavicle fracture is a reliable surgical method for satisfactory reduction and rigid fixation, a lower incidence of nonunion and excellent clinical result.

• Journal of fish pathology
• /
• v.11 no.2
• /
• pp.119-127
• /
• 1998

Two species of the parasitc copepods, Clavellopsis hugu (Lemaeopodidae; Siphonostomatoida) and Taeniacanthus yamagutii (Taeniacanthidae; Poecilostomatoida) from cultured Korean fish, Takifugu obscurus, is described and reported for the first time in Korea. The parasite was recovered from the buccal cavity, nose and skin. Clavellopsis hugu is easily identified by the body shape, 2nd antenna, mandible and 2nd maxillae. In female, cephalothorax flexed dorsally, second antenna biramose, mandible with serrate blade, second maxillae completely fused at base of cephalothorax. In male, cephalothorax and trunk fused into an ovoid, two pairs of maxillipeds chelate. The most distinctive features of Taeniacanthus yamagutii are terminal process of second maxilla stout, maxilliped claw with conspicuous digitiform process at base and a setiform element at the tip of each exopod spine of legs 2-4. Both parasitic copepod species are new to the Korean fauna. The korean fish, Takifugu obscurus should be considered as an additional host of this species because these parasite were recovered from the western coast of Korea (Boryung Hatchery).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.131-142
• /
• 2021

For old piers constructed when seismic design code had not been developed, lap splices usually exist in plastic hinge region. Corrosion of rebars causes decreasement in cross-sectional area of rebar and deterioration of lap-splice behaviour, thereby reducing the seismic performance of the old piers. In this research, according to these characteristics of old piers, test specimens are designed and manufactured considering rebar corrosion, lap splice, seismic design details, and seismic reinforcement. These effects are investigated through experiments. As a result of these experiment, rebar corrosion as well as lap splice reduces displacement ductility. When seismic design details or steel-plate reinforcement are applied, sufficient displacement ductility is expressed. For non-seismically designed specimens, loosening of the lap splice of transverse rebars caused buckling of longitudinal rebars and crushing of core concrete in plastic hinge region . For seismically designed specimen, area-reducing and untying of transverse rebars due to corrosion of rebars caused buckling of longitudinal rebars and crushing of core concrete.

• Composites Research
• /
• v.31 no.4
• /
• pp.139-144
• /
• 2018

Long Fiber-reinforced composites have advantages of excellent production efficiency and formability of complex shapes compared to conventional continuous fiber reinforced composite materials. However, if we need to make complicated composite shapes or to assemble parts made of different materials, a variety of joining methods are needed. In general, long fiber prepreg sheet (LFPS) contains mold release agent to facilitate demolding after thermoforming. Therefore, mechanical fastening is required in addition to the adhesive bonding to get proper joining strength. In this study, we proposed a stainless steel insert for co-cure bonding which cures LFPS and bonds the stainless steel insert through thermoforming process. The wing of the insert which is spread during the thermoforming process induces adhesion and mechanical wedging effect and serves as a hook to resist the pulling force. The burn-out method was used to confirm the unfolded state of the stainless steel insert wings inserted into the composite material. The static pull-out test was performed to quantitatively evaluate the joining strength. From these experimental results, the condition which guarantees the most appropriate joining strength was derived.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.21-29
• /
• 2020

Morphology of a strain of unspecified Skeletonema species established from Korean coast was examined by light, fluorescence and scanning electron microscopy, and SSU(small subunit) and LSU(large subunit) rDNA of the strain were also sequenced. The specimen was characterized by solitary or short chains, and each cell contained 1-2 chloroplasts. The valve face was slightly convex, and the terminal fultoportula processes (TFPPs) were open and showed narrow distal ends that could be truncated or spiny with claw-like protrusions. The basal part of the TFPPs was tubular and oblique to the cell axis. The intercalary fultoportula processes (IFPPs) were also narrow, completely open, and joined in a 1 : 1 junction. Occasionally, one IFPP was connected with two opposing IFPPs. The morphological features of the specimen were identical to those of Skeletonema pseudocostatum. Molecular phylogeny based on SSU rDNA revealed that the Korean strain is nested within a clade comprising S. pseudocostatum and S. tropicum. However, based on D1-D2 LSU rDNA sequences, a clade including S. pseudocostatum and a Korean strain was separated from the S. tropicum clade. This indicates that the Korean strain can be identified as S. pseudocostatum. This species represents the first record from Korean coastal waters.

• Parasites, Hosts and Diseases
• /
• v.34 no.3
• /
• pp.169-176
• /
• 1996

A scanning electron microscopic study was performed to observe the surface ultrastructures of the third-stage larvae of Gnathostoma hispidun. The early third-stage larvae (EL3) were collected from the viscera of Chinese loaches by the artificial digestion method . The advanced third-stage larvae (AdL3) were recovered from mice experimentally infected with EL3. Both larval worms were fixed with 2.5% glutaraldehyde, dehydrated in graded alcohol. dryad in critical point dryer, and coated with gold. The specimens were observed with a SEM (DS- l30C). On the head bulb of both larval stage, the mouth had a pair of lateral lips of equal size and of half moon shape. Each lip had a couple of labial papillae and a small amphid located between the two papillae. The hooklets on the head bulb had single-pointed tips and curved posteriorly. The cuticular spines of EL3 were larger and more densely distributed in the anterior area (about 1.8 Mm in length) and gradually decreased in size and number posteriorly. The cuticular spines in the anterior area of AdL3 were sharp-pointed and about 4.5 Mm in length, and those in the middle area were about 1.75 Mm. The velvety cuticular folds and dot-like cuticular spines were distributed in the posterior area. A cervical papilla was located between the 7th and 8th transverse striations. A dome-like body papilla was located at the posterior 1/4 of body. An ellipsoidal excretory pore was located between the 17th and 18th striations. From the above results, it is suggested that the characteristic SEM findings obtained from this study may be helpful on the species identification of larval Gncthostomn.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.72-78
• /
• 2010

Purpose: Too develop a flexible drill device that can be inserted into the shoulder joint so that arthroscopic transosseous suture repair for Bankart lesion is possible. Materials and Methods: We created a device composed of a flexible drill unit and a guide pipe unit. The flexible drill unit was made of flexible multifilament wires (1.2 mm in diameter) that was twisted into one cord so that it can flex in any direction and a drill bit (1.2 mm in diameter) that is attached onto one end of the flexible wire. The guide pipe unit was a 150 mm long metal pipe (2.0 mm in inner diameter and 3.0 mm in outer diameter), with one end bent to 30 degrees. The flexible drill set was inserted into the shoulder joint through the posterior portal of the joint. The guide pipe component was placed onto the medial wall of the glenoid so that the pipe was placed 5 mm posterior to the margin of the anterior glenoid rim. The flexible drill was driven through the glenoid by the power drill so that holes were made in the glenoid. A non- absorbable suture was passed through the hole. Tying of a sliding knot tying was accomplished over the capsule and labrum after making a stitch through the capsule and labrum with a suture hook loaded with suture passer. The same procedures were done at the 2 and 4 O'Clock positions of the glenoid. Results: Five cases with Bankart lesion received arthroscopic transosseous repair with our flexible drill device. There were no intraoperative problems. Neither redislocation nor subluxation was reported at final follow-up. Conclusion: Arthroscopic transosseous suture repair without suture anchors and easy tying of a sliding knot are possible with a flexible drill set.