• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.2
• /
• pp.60-67
• /
• 2000

When the eigenvalues of the input covariance matrix of an array system spread by orders of magnitude, conventional adaptive arrays can't remove all the interference signals effectively In this paper, an Applebaum array adopting an adaptive gain controller (AGC) in the feedback loop of the array is proposed When eigenvalue spreaded interferences are incident to an array, a high power interference is removed easily in several iterations while a relative low power interference which is a cause of eigenvalue spread is still remained In the array output After some initial iterations, the proposed array increases the correlation between the low power interference and the array output by amplifying the output signal of the array As a result, the weights vector adapts to the direction of the low power interference as well as that of the high power interference Computer simulation results show that the proposed array gives high output signal to interference plus noise ratio (SINR) and a fast convergence speed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.37-39
• /
• 2015

In this paper, we propose a distributed user scheduling with interference-aware power control (IAPC) to maximize signal to generating interference plus noise ratio (SGINR) in multi-cell uplink network. Assuming that the channel reciprocity time-division duplexing (TDD) system is used, the interference channel from users to other cell BSs is obtained at each user. In the proposed scheduling, each user reduces the transmit power if its generating interference to other BSs is larger than a predetermined threshold. Each BS selects the user with the largest SGINR among users. Simulation results show that the proposed technique significantly outperform the existing user scheduling algorithms.

• Journal of Internet Computing and Services
• /
• v.11 no.3
• /
• pp.33-41
• /
• 2010

The battery consumption and the wireless communication pattern were analyzed for the low power and the improvement of channel interferences between of Zigbee networks and WPAN(Wireless Personal Area Network). The communication patterns considering end device's battery saving during channel searching period were analyzed for low power consumption topology of Zigbee dynamic ad-hoc characteristics. And, the communication patterns were analyzed due to channel interferences between WLAN and Random Back off of Zigbee, too. As a result, the communication patterns of Zigbee's coordinator and end devices is alleviated for the longer battery life time of Zigbee's end device due to Zigbee's end device setting techniques.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2340-2342
• /
• 2003

본 논문에서는 최적 전력 제어를 이용하여 이동국과 기지국간 최소의 소비 전력과 최대의 채널용량을 유지할 수 있는 알고리즘을 제안하고자 한다. 이동통신 시스템은 한 기지국 안에 속한 가입자 사이에 간섭이 발생할 뿐 아니라 동일한 대역을 사용하는 기지국 사이에도 간섭이 발생하게 된다. 또한 이동통신 시스템은 열악한 무선 환경을 기반으로 수시로 변화하는 가입자 요구를 수용해야 한다. 따라서 가입자 요구에 적절히 대응하는 최적 전력 제어가 이루어져야 원활한 서비스를 가입자들에게 제공할 수 있다. 즉, 동시 통화를 시도하는 여러 가입자들 간의 간섭을 받지 않고 알맞은 통화의 질을 제공받을 수 있도록 하는 전력 제어의 과정이 필수적이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.427-438
• /
• 1998

The bit error rate(BER) performance of Trellis Coded QPSK signal in the presence of cochannel interference (CCI) and Rician fading is investigated. The trellis coded QPSK system adopts Maximum Ratio Combining (MRC) diversity reception and Reed-Solomon code to enhance system performance. Using the derived error probability equation, the error performance of trellis coded QPSK system has been evaluated and shown in figures to discuss as a function of signal power to noise power ratio (SNR), signal power to interference power ratio(SIR), direct to indirect signal power ratio ($K_R$), the number of diversity branch (M), the frame length of Reed-Solomon code (n), the number of error correction symbol (t), and the number of state of trellis encoder. From the results, we know that proposed system is affected by cochannel interference and fading in microcell environment. Also, BER performance of Trellis Coded QPSK system can be improved as increasing either the power of desired signal or the value of SIR. And the BER floor in microcellular system is caused by the cochannel interference and it occurs at high BER when SIR is low. And Reed-Solomon code (n=15, t=2) is more effective to restrain the affection of CCI and fading than MRC diversity reception (M=2).

• Journal of Korea Multimedia Society
• /
• v.12 no.10
• /
• pp.1407-1417
• /
• 2009

Today is the Information age which Internet service acts a most important Information Source. So the Power Line Communication has been achieved to offer Internet service for Last-Mile area. And Research is achieved to frequence range from 30MHz to 80MHz for High-speed communication service. But, Power Line is not suitable for communication, So, electric wave is generated from flow of communication information. And the electric wave is interfered with Wireless Communication Service using the same frequence range. In this paper, a Notch Filter for reduce of interference between Power Line Communication and Wireless Communication Service is proposed. The proposed emulator is developed using TMS320C6416T DSP board of Texas Instruments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.889-897
• /
• 2004

In this Paper, we propose the algorithm to provide stable communication in OFDM system under the highly interfered environment by the same/different systems which use same bandwidth or other jamming signal, i.e., radar signal. The proposed Adaptive Subcarrier Assignment(ASA) method first estimates the received power of each subcarrier in the block or fin or OFDM receiver. Then we estimate the threshold level which is the average power of the transmitted OFDM signal with AWGN. The highly interfered subcarriers, which are greater powers than the specified threshold level, are rejected in the next transmission and the only non-interfered subcarriers are selected as the next transmission. This algorithm provides stable communication in any OFDM systems without changing the physical layer under the highly interfered communication environment. We estimated the status of the subcarriers based on the bandwidth and power of the jamming signal and showed the performance of the proposed algorithm by the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1119-1126
• /
• 2007

In this paper, we examine the scheme that the CR (Cognitive Radio) user can coexist with primary user with obeying the concept of interference temperature proposed by FCC. Regarding to the capability of classifying the signals of primary user after the spectrum sensing, the interference temperature model can be discriminated by the ideal and generalized ones. And then, about each model, it can optimize the bandwidth and transmit power with satisfying predetermined capacity of CR user. Especially, it has been considered to allocate to CR user not to interfere to primary users for proper coexistence in conventional interference temperature multiple access technique, proposed by T. Clancy, but this paper proposes the scheme that considering QoS of not only primary users, but also CR user. The hill-climbing algorithm is employed to produce the bandwidth and transmit power subject to satisfying the required capacity.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.201-204
• /
• 2001

본 논문에서는 전력케이블, 전력용 변압기 및 가스 절연차단기와 같은 전력설비의 열화로 인한 방전현상 검출을 위해서 간섭계형 광섬유 센서를 제작하고, 방전 현상을 측정하였다. 광섬유 센서는 아크릴과 알류미늄 광섬유를 수회 감은 맨드릴형으로 선택하였으며, 간섭계는 Sagnac 간섭계를 선택하여 실험하였다. 방전현상은 절연유내에 방전모의셀을 설치하여 방전현상을 일으켰고, 광섬유 센서로 방전신호를 검출하였다.

• Electronics and Telecommunications Trends
• /
• v.21 no.6 s.102
• /
• pp.202-211
• /
• 2006

본 논문에서는 2.4GHz 마그네트론을 이용하는 RF 전구에 대하여 동 대역을 사용하는IEEE 802.11b 기반의 무선랜과 전파간섭을 분석하였다. RF 전구가 무선랜에 미치는 전파간섭을 분석한 결과, LOS 환경(무선랜 수신전력 -63dBm/MHz)에서는 무선랜 채널 9, 10에 약 1~2Mbps의 전송속도 저하를 유발하였으며, Non-LOS 환경(무선랜 수신전력 -78dBm/MHz)에서는 무선랜 채널 6-11번에 통화절단 현상을 야기하였다. 그러나, RF 전구 수에 따른 간섭전력의 누적효과는 없는 것으로 나타났다.