• Nuclear Engineering and Technology
• /
• v.21 no.4
• /
• pp.294-301
• /
• 1989

The Axial Power Distribution Monitoring System(APDMS) program was developed to calculate a detailed axial power distribution using two-level excore detector, cold leg temperature and control rod position signals. The unnormalized two-level excore detector signals were corrected for the rod shadowing factor determined by control rod position and for the temperature shadowing factor calculated based on cold leg temperature. A shape annealing matrix was then applied to the corrected excore detector response to yield peripheral power. After the core average power was obtained using linear relationship bet-ween core average and peripheral power, the boundary point power correction coefficient was applied to core average power in order to obtain boundary power for both upper and lower core axial boundaries. Then, the axial power distribution was synthesized by spline approximation. In spite of burnup, power level, control rod postion and axial offset changes, the comparisons of axial power distributions between BOXER simulation program and APDMS results showed good agreements within 5% root mean square error for Kori Unit 3 Cycle 4.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.305-319
• /
• 2021

The overseas calibration sites such as Mongolia used for Korea Multi-purpose Satellite (KOMPSAT-5 or K5), have a disadvantage in that maintenance and repair costs are high and immediate response is difficult when an unexpected problem occurs. Accordingly, the necessity of establishing a domestic SAR calibration site was suggested, but the progress of related research is insignificant. In this paper, we investigated what conditions should be satisfied in terms of backscattering characteristics to construct a site for SAR satellite image quality evaluation and calibration. First of all, it was selected first by applying general indicators such as accessibility and availability among places recommended as satellite image calibration candidate sitesin Korea. Next, three places, site A (Goheung-gun, Jeollanam-do), site B (Jeonju-si, Jeollabuk-do), and site C (Daedeok Research Complex, Daejeon), were selected as the final candidates because they are relatively wide and easy to install AT or CR. Site A, located in Goheung-gun, Jeollanam-do, was best considered in terms of slope measurements, minimum site area to obtain ISLR, uniformity of DN values and backscatter coefficients, interference by strong reflectors, and backscatter clutter level.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.132-147
• /
• 2016

In this study the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS) sensor onboard the Soil Moisture Ocean Salinity (SMOS) and Advanced Microwave Scanning Radiometer 2 (AMSR2) sensor onboard the Global Change Observation Mission-Water (GCOM-W1) based soil moisture retrievals were revised to obtain better accuracy of soil moisture and higher data acquisition rate over East Asia. These satellite-based soil moisture products are revised against a reference land model data set, called Global Land Data Assimilation System (GLDAS), using Cumulative Distribution Function (CDF) matching and regression approach. Since MIRAS sensor is perturbed by radio frequency interferences (RFI), the worst part of soil moisture retrieval, East Asia, constantly have been undergoing loss of data acquisition rate. To overcome this limitation, the threshold of RFI, DQX, and composite days were suggested to increase data acquisition rate while maintaining appropriate data quality through comparison of land surface model data set. The revised MIRAS and AMSR2 products were compared with in-situ soil moisture and land model data set. The results showed that the revising process increased correlation coefficient values of SMOS and AMSR2 averagely 27% 11% and decreased the root mean square deviation (RMSD) decreased 61% and 57% as compared to in-situ data set. In addition, when the revised products' correlation coefficient values are calculated with model data set, about 80% and 90% of pixels' correlation coefficients of SMOS and AMSR2 increased and all pixels' RMSD decreased. Through our CDF-based revising processes, we propose the way of mutual supplementation of MIRAS and AMSR2 soil moisture retrievals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.258-270
• /
• 2014

In this paper, we investigate channel capacity of two kinds of uplink OFDMA (Orthogonal Frequency Division Multiple Access) schemes, i.e. ZCZ (Zero Correlation Zone) code time-spread OFDMA and sparse SC-FDMA (Single Carrier Frequency Division Mmultiple Access) robust to access timing offset (TO) among multiple users. In order to reflect the practical condition, we consider not only access TO among multiple users but also peak to average power ratio (PAPR) which is one of hot issues of uplink OFDMA. In the case with access TO among multiple users, the amplified signal of users by power control might affect a severe interference to signals of other users. Meanwhile, amplified signal by considering distance between user and base station might be distorted due to the limit of amplifier and thus the performance might degrade. In order to achieve the maximum channel capacity, we investigate the combinations of transmit power so called ASF (adaptive scaling factor) by numerical simulations. We check that the channel capacity of the case with ASF increases compared to the case with considering only distance i.e. ASF=1. From the simulation results, In the case of high signal to noise ratio (SNR), ZCZ code time-spread OFDMA achieves higher channel capacity compared to sparse block SC-FDMA. On the other hand, in the case of low SNR, the sparse block SC-FDMA achieves better performance compared to ZCZ time-spread OFDMA.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.81-98
• /
• 1999

The influence of tunnelling on buildings has become an important issue in urban areas. The problem is an interactive one: not only do tunnelling settlements affect existing structures, but existing structures affect tunnel-induced soil movements. In order to examine the constraint of surface settlement and the degradation of building damage parameters, 3-dimensional elasto-plastic finite element analyses are peformed. Also, in this paper, the results of the parametric studies for the variations of the damage parameters due to the ground movements are presented by utilizing 2-dimensional elasto-plastic finite element models, totally 162 models. The width of a structure, its bending and axial stiffness, its position relative to the tunnel and the depth of tunnel are considered. The interaction is shown by reference to commonly-used building damage parameters, namely angular distortion, deflection ratio, maximum building settlements, maximum differential settlements and horizontal strain. By introducing relative stiffness parameters which combine the bending and axial stiffness of the structure with its width and stiffness of soil, design curves are established. These give a guide as to the likely modification of the greenfield settlement trough caused by a surface structure. They can be used to give initial estimates of likely building damage.

• Korean Journal of Optics and Photonics
• /
• v.31 no.1
• /
• pp.13-19
• /
• 2020

To measure underwater acoustics using a fiber-optic Sagnac interferometric sensor, the sensitivities of ring-type probes are investigated by theoretical and experimental studies. A ring-type probe was fabricated by packaging a single-mode fiber wound around an acrylate cylinder of diameter 5 cm with epoxy bond. The probes were prepared as A-type, which was packaged with 46.84 m of sensing optical fiber, and B-type, which was packaged with 112.22 m of sensing fiber. The underwater acoustic test was performed at frequencies of 50, 70, and 90 kHz, and over a range of acoustic pressure of 20-100 Pa, to study the sensitivity. A commercial acoustic generator was located 1 m from the acoustic sensor, such as the ring-type probe or a commercial acoustic sensor. From the experimental test, the acoustic sensitivity of the ring-type probe had different values due to acoustic frequencies, unlike the theoretical prediction. Therefore, the experimental sensitivities were averaged for comparison to the theoretical values. These averaged sensitivities are 25.48 × 10^-5 rad/Pa for the A-type probe and 60.79 × 10^-5 rad/Pa for the B-type probe. The correction coefficient of Young's modulus c was determined to be 0.35.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.46-49
• /
• 2011

A highly sensitive and selective extraction-spectrophotometric method has been developed for determination of trace amounts of cimetidine. This method is based on the extraction of cimetidine as an ion pair with bromothymol blue (BTB) into chloroform and measuring its absorbance at 417 nm. The effect of different variables such as pH, concentration of BTB, volume of chloroform and shaking time was investigated. The effect of interfering ions on the extraction was also studied. The calibration curve was linear in the range of 0.25-8 ${\mu}gmL^{-1}$ with correlation coefficient of 0.9997. The detection limit based on 3Sb was 0.14 ${\mu}gmL^{-1}$ and relative standard deviation for 10 replicated measurements of 1.0 and 4.0 ${\mu}gmL^{-1}$ of cimetidine was 3.2 and 1.49%, respectively. The proposed method was applied to the determination of cimetidine in pharmaceutical samples with good recoveries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.209-216
• /
• 2009

The repeater for wireless broadband internet (Wibro) system using OFDM demands the short processing delay to eliminate inter-symbol interference resulted from the time delay greater than the guard time. Towards this, the total system delay of repeater is expected to be minimized as possible as it can without distorting signal quality. In general, the FIR-type of filter is commonly deployed as a channelization filter, but due to its large amount of coefficients for producing prerequisite filter response the excessive large time delay occurs. To withstand this problem, the paper proposes the method for designing IIR filter whose response almost identical to that of the original filter. Moreover, in order to linearize the phase response of the designed IIR filter, this paper also introduce the way of designing the all-pass filter to be cascaded works for linearizing phase response of the channelization as well as the de-channelization filter. To achieve the further improvement in linearization of the phase response and reduction of the overall complexity, this paper tries to transform the integrated IIR filter group into the structure in polyphase style. The computer simulation verifies that the integrated IIR filter group designed in this paper reveals the relatively short processing delay without harming the acceptible signal quality.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.1-9
• /
• 2000

In this paper, for the reverse link of a imperfect power controlled DS/CDMA cellular system when a mobile radio channel is a Rayleigh distributed multipath fading channel, A extended DS/CDMA blocking probability formula considering both shadowing and multipath fading is derived. Erlang capacity and equivalent channel number considering shadowing are analyzed and compared with those considering both shadowing and multipath fading, respectively. The DS/CDMA blocking probability is calculated based on the analysis method that obtains Erlang capacity and ICF(interference correction factor) using the median value of $E_{b(i)}$/ $I_{0}$ corresponding to each reverse link user Assuming that the blocking probability set 2%, it is observed that the Erlang capacity is 19.97 Erlang at the data rate $R_{b}$=9.6 kbps and 11.67 Erlang at the data rate $R_{b}$=14.4 kbps and then is less 16% and 19% than the Erlang capacity considering shadowing only, respectively. It is also shown that the effect of multipath fading must not be ignored and then exact Erlang capacity and equivalent channel numbers that the DS/CDMA cellular system can support are provided.d.d.d.