• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.253-253
• /
• 2010

Silicon-oxide-nitride-oxide-silicon (SONOS) 구조를 가지는 플래쉬 메모리 소자는 기존의 플래쉬 메모리 소자에 비해 쓰고 지우는 속도가 빠르고, 데이터의 저장 기간이 길며, 쓰고 지우는 동작에 의한 전계 스트레스에 잘 견뎌내는 장점을 가지고 있다. 그러나 SONOS 형태의 플래쉬 메모리 소자에 대한 전기적 특성에 대한 연구는 많이 진행되었으나, SONOS 형태의 플래쉬 메모리에서 소자의 셀 사이즈가 감소함에 따라 발생하는 인접한 셀 간의 간섭 현상에 대한 연구는 상당히 미흡하다. 본 연구에서는 SONOS 형태의 플래쉬 메모리에서 소자의 셀 사이즈가 작아짐에 따라 발생하는 인접한 셀 간의 간섭 현상에 대해 조사하였다. SONOS 형태의 플래쉬 메모리소자의 터널링 산화막, 질화막과 블로킹 산화막의 두께를 결정하였고, 각 셀의 크기가 감소함에 따라 발생하는 소자의 전기적 특성을 3차원 시뮬레이션 툴인 Sentaurus를 사용하여 계산하였다. 병렬 캐패시턴스에 의해 셀들 사이에 발생하는 커플링 효과를 확인하기 위해 선택한 셀의 문턱 전압이 주변 셀들의 프로그램 상태에 의해 받게되는 영향을 관찰하였다. 본 연구에서는 셀 사이에 간섭 방지층을 삽입함으로 인접 셀 간 발생하는 간섭현상의 크기를 크게 줄일 수 있음을 시뮬레이션 결과를 통하여 확인하였다. 이때 간섭 방지층의 깊이에 따라 감소하는 문턱전압의 변화량을 계산하였고, 방지층을 충분히 깊게 제작함으로 셀 간 간섭 현상을 막을 수 있음을 확인 하였다.

• Korean Journal of Optics and Photonics
• /
• v.32 no.3
• /
• pp.108-113
• /
• 2021

We propose and experimentally demonstrate a method of remote sound extraction using laser Doppler interferometry. The output frequency of a laser Doppler interferometer changes to be the same as the frequency of the acoustic wave from than object vibrated by the sound due to the Doppler effect. Based on this phenomenon, we measure the vibrational frequency of a remote target affected by a sound wave in real time, via laser Doppler interferometry. We track the peak frequency of the interferometer's output via appropriate signal processing, which confirms that the characteristics of the so detected wave are the same as that of the original sound source. We also confirm that the same method can retrieve the sound waves not only from remote sources of single tones, but from those of any sound.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.15-24
• /
• 2021

Recently, cases for inevitable adjacent construction are increasing due to the limited spaces in urban area. When a new structure is constructed near an existing structure, interference effects induced by the pre-existing structure should be considered. Thus, numbers of studies have been conducted to investigate the effects of adjacent construction, while laboratory scales studies are not well reported. In this study, laboratory scale experiments have been conducted to investigate the bearing capacity and settlement variations with different adjacent construction cases. Results show an optimistic ground bearing capacity increase of the new foundation structure due to the existing foundation structure, while concerns on the increased settlement of the pre-existing structure. Thus, both bearing capacity of the new foundation structure and subsequent settlement of the existing foundation structure have to be considered when assessing the technical applicability of adjacent structure construction on site.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.271-278
• /
• 2003

In this paper, we propose a new MLP based detector which has low circuit complexity and fast adaptation capability for CDMA downlink in frequency selective fading, and is easy for parameter optimization. The simplified structure of the proposed MLP is designed by making use of transmission characteristics of downlinks such that all users signals transmitted over same propagation paths and the number of channelization codes are limited. Significant performance improvement over Rake receiver can be obtained with the proposed MLP and the efficiency of the proposed MLP was compared with that of conventional MLP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.265-275
• /
• 2011

In this paper, we propose a Multi-Strata Space Time Code(MSSTC) for MIMO retransmissions. Since MSSTC is constructed by superimposing two OSTBC matrices, there are no intra-stratum interferences, but there exist inter-strata interferences. In MIMO retransmission environment, the transmitter switches adaptively the phases of strata at each transmission by using 1-bit feedback sent from the receiver in order to reduce the inter-strata interferences efficiently. We also propose a power allocation scheme between strata to improve error performance. Simulation results show that the proposed scheme achieves better performance than other conventional schemes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.498-506
• /
• 2019

In this paper, we propose a PRF design method to improve the performance of the ESA radar, by excluding the interference from an improper PRF. Like the conventional method, the proposed method also considers the interference between the transmitted signal and the nadir signal, but additionally analyzes the relationship between the interference and the signal beamwidth. The simulation results show that the proposed method quantitatively and qualitatively excluded interference from the PRF and additionally dealt with the beamwidth broadening effect of an ESA radar.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.154-161
• /
• 1995

In order to analysis of the stress distribution around flaws and the interaction effects between fatigue cracks, stress around micro hole was analyzed by Finite Element Method(F.E.M.) and micro hole specimens were tested using rotary bending fatigue machine and twisting fatigue machine to identify stress effects for fatigue cracks initiating from micro holes and interaction effects between micro holes. The results are as follows : Interaction effects of .sigma. $_{y}$for the micro hole side is larger than the large micro hole side when the interval between micro holes is near. Stress concentration factor increase as the diameter of micro hole becomes smaller. But, stress field of micro hole is smaller than that of large micro hole at h .leq. r (h:depth of micro hole, r:radius of micro hole) and that of large hole is larger than that of small micro hole at h >r expect the small range from micro hole.e.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.182-188
• /
• 2005

This paper presents an efficient technique for interference suppression in IEEE 802.11b WLAN systems. A linearly constrained adaptive array processor which may improve reception performance of WLAN device by reducing co-channel interference signal and multipath effects effectively was proposed. A spatial smoothing method is used to prevent cancellation of a desired signal in a coherent environment and also integral nulling method is employed to improve the array performance in indoor environment. It was shown that the integral nulling approach performed best while the spatial smoothing method performed better than linearly constrained array processing. The performance of the WLAN system may be improved by the proposed methods which reduce co-channel, coherent, and WPAN interferences effectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.197-209
• /
• 2018

In this study, numerical analyses on Quad Tilt Rotor(QTR) are carried out to investigate the interference effect of components and effect of operating condition during forward flight. Actuator Surface Method(ASM) which is implemented in an open source CFD code, OpenFOAM, is used to calculate the flow field around QTR with high computational efficiency. The lift of the front and rear wing is found to increase or decrease depending on the rotation direction of the rotor. At the rear wing, the interference effects of the front and rear rotor appear as a combined manner. Performance change due to the phase difference is found to be insignificant. For both rotors, the locally higher thrust is generated by the blockage effect of the wing. The interference effect of wake from the front nacelle contributes to higher local thrust for the rear rotor compared to the front rotor. And it is observed that the amplitude of thrust oscillation can decrease depending on the phase difference between the rotors. Aerodynamic performances of both rotors and the entire aircraft were compared and analyzed for various operating conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.200.1-200.1
• /
• 2015

Charge trap flash (CTF) 메모리 소자는 기존의 플로팅 게이트를 사용한 플래시 메모리 소자에 비해 쓰고 지우는 속도가 빠르고, 소비 전력이 적으며, 쓰고 지우는 동작에 의한 전계 스트레스에 잘 견뎌내는 장점을 가지고 있다. 그러나 CTF 메모리 소자에서도 메모리 셀의 크기가 작아짐에 따라 셀 사이의 간섭 효과를 무시할 수 없다. 인접 셀 간의 간섭현상은 측정 셀의 문턱전압을 예측할 수 없게 변화시켜 소자 동작의 신뢰성을 낮추고 성능을 저하시킨다. 본 논문에서는 셀 사이의 간섭을 줄이고 소자의 성능을 향상시키기 위해 charge trap 층에 금속 공간층을 삽입한 CTF메모리 소자의 전기적인 특성에 대해 연구하였다. 금속 공간층을 갖는 CTF 메모리 소자는 기존 CTF 메모리 소자의 트랩층 양 측면에 절연막과 금속 공간층을 증착시켜 게이트가 트랩층을 감싸는 구조를 갖는다. 인접 셀 사이에 발생하는 간섭 현상과 전계 분포를 분석하였다. 프로그램 동작 시CTF 메모리 소자 내에 형성되는 전계의 분포와 크기를 계산함으로 금속 공간층이 인접한 셀에서 형성된 전계를 차폐시켜 셀 간 간섭 현상을 최소화하는 것을 확인하였다. 이러한 결과는 인접 셀 간의 간섭현상을 최소화하면서 소자 동작의 신뢰성이 향상된 대용량 메모리 소자를 제작하는데 도움을 줄 수 있다.