• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.6
• /
• pp.35-40
• /
• 2012

This paper has proposed a 3~5 GHz IR-UWB low power transmitter for range detection application. Proposed transmitter which has been implemented in a $0.13{\mu}m$ CMOS technology is all digital circuit that consist of simple digital logic. this feature insure low complexity and low power consumption. In addition, center frequency can be changed by adopting voltage controlled delay cell for avoiding existing another radio frequency in UWB low band. Proposed circuit consume only 10pJ/b from 1.2 V supply voltage. The simulation results show 3.3~4.3 GHz center frequency controllability, -51 dBm/MHz maximum output power and is satisfied with FCC regulation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.109-116
• /
• 2014

In recent, ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart phone, notebook computer, printer and portable multimedia devices. Accordingly, studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi device using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band causes serious network performance deterioration of wireless sensor networks. This paper examined a method of identifying channel status to avoid interference among wireless communication devices using IEEE 802.11b (Wi-Fi) and other ISM bands during communication among IEEE 802.15.4 based wireless sensor network nodes in ISM band. To identify channels occupied by Wi-Fi traffic, various studies are being conducted that use the RSSI (Received Signal Strength Indicator) value of interference signal obtained through ED (Energy Detection) feature that is one of IEEE 802.15.4 transmitter characteristics. This paper examines an algorithm that identifies the possibility of using more accurate channel by mixing utilization of interference signal and RSSI mean value of interference signal by wireless sensor network nodes. In addition, it verifies such algorithm by using OPNET Network verification simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1026-1031
• /
• 2022

Cognitive Radio Ad-Hoc Networks (CRAHNs) enable to overcome the shortage of frequency resources due to the increase of radio services. In order to avoid interference with the primary user in CRANH, channel sensing to check the idle channel is required, and when the primary user appears, the time delay due to handover should be minimized through fast idle channel selection. In this paper, throughput was improved by reducing the number of channel sensing and preferentially sensing a channel with a high probability of being idle, using reinforcement learning. In addition, we proposed a multi-channel MAC (Medium Access Control) protocol that can minimize the possibility of collision with the primary user by sensing the channel at the time of data transmission without performing periodic sensing. The performance was compared and analyzed through computer simulation.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.1-11
• /
• 2015

WBAN(Wireless Body Area Network) operating around the human body aims at medical and non-medical service at the same time. and it is the short-range communication technology requiring low-power, various data rate and high reliability. Various studies is performing for IEEE 802.15.4, because IEEE 802.15.4 can provide high compatibility for operate WBAN among communication standard satisfiable these requirements. Meanwhile, in the case of coexisting many IEEE 802.15.4-based WBAN, signal interference and collision are the main cause that is decreasing data reliability. but IEEE 802.15.4 Standard does not consider about coexistence of many networks. so it needs improvement. In this paper, To solve about this problem, identify coexistence problem of IEEE 802.15.4-based WBAN by preliminary experiments. and propose a scheme to mitigate the reliability decrease at multiple coexistence WBAN. The proposed scheme can be classified in two steps. The first step is avoidance to collision on the CFP through improving data transmission. The second step is mitigation collision through converting channel access method. Proposed scheme is verified the performance by performing comparison experiment with Standard-based WBAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.369-379
• /
• 2011

During the routing process between nodes on the CR(Cognitive Radio) network conducting for efficient use of limited frequency resources, spectrum handover process due to the appearance of the PU occupies most of the routing latency, and also decreases the reliability of the path. In this paper, a cooperative routing protocol in a multi-channel environment is proposed. The source node broadcasts a message with available channel lists and probability of PU appearance during its route guidance. The intermediate nodes re-transmit the message, received from the source node, and update and maintain the information, status table of the path. The destination node determines the optimal path and sends a reply message to the selected path after it receives the messages from the intermediate nodes. The average probability of the PU appearance and the average time of the PU appearance are updated while transferring data. During data transmission the channel with the lowest probability of appearance of the PU is selected dynamically and if a PU appears on the current channel partial repairment is performed. It is examined that reliability of the selected path considerably is improved and the routing cost is reduced significantly compared to traditional routing methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.250-256
• /
• 2006

The revision of radio waves act, which took effect on July 1,2005, widened the bandwidth of PLC from $9kHz{\sim}450kHz$ to $9kHz{\sim}30MHz$. This high upper limit of frequency may cause the interference in HF wireless communications. From this point of view, the goal of this research is to suggest the estimation method of whether-or-not the interference occurs and furthermore offer countermeasures to avoid it hereafter. Ministry of Information and Communication Radio Research Laboratory(MIC-RRL)has been researching for the interference and devoting themselves to turn out how much it affects to HF wireless communications since the revision took effect. This research suggests some estimation methods with receivers, signal generators, or SINAD(Signal to Noise and Distortion) Meter which is so suitable for the RF environment that we can overcome the existing limit to the EMC environment. In addition, this research is focused on securing the environment for wireless communications by establishing the safety zone or suggesting the ways to prohibit the use of the bandwidth, which may cause serious interference, in order to minimize the effect of PLC on HF maritime mobile telecommunications.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2021

Path-following control is considered as one of the most fundamental skills to realize autonomous navigation of marine vessels in the ocean. This study addresses with the path-following control for a ship in which there are environmental disturbances in the directions of the surge, sway, and yaw motions. The guiding principle and back-stepping method was utilized to solve the ship's tracking problem on the reference path generated by a virtual ship. For path-following control, error dynamics is one of the most important skills, and it extends to the research fields of automatic collision avoidance and automatic berthing control. The algorithms for the guiding principles and error variables have been verified by numerical simulation. As a result, most error variables converged to zero values with the controller except for the yaw angle error. One of the most interesting results is that the tracking errors of path-following control between two ships are smaller than the existing safe passing distances considering interaction forces from near passing ships. Moreover, a trade-off between tracking performance and the ship's safety should be considered for determining the proper control parameters to prevent the destructive failure of actuators such as propellers, fins, and rudders during the path-following of marine vessels.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.6
• /
• pp.97-109
• /
• 2010

Although the primary liability for online copyright infringement may fall on the individual who illegally copies, transfers, and/or distributes the copyrighted content, the issue of indirect liability for Online Service Providers (OSPS) that provide a channel for the distribution of illegal content has recently come under the spotlight. Currently, in an effort to avoid liability for indirect copyright infringement and improve their reputation, most OSPs have voluntarily applied filtering technology. Under the Copyright Act of Korea, special types of OSPS including P2P and Web-based Hard Drive (WebHard) are required to incorporate filtering technology, and may be charged with penalties if found without one. However, despite the clear need for filtering mechanisms, several arguments have been set forth that question the efficacy and appropriateness of the system. As such, this paper discusses the liability theory adopted in the US. -a leader in internet technology development-and analyzes the scope of liability and filtering related regulations in our copyright law. In addition, this paper considers the current applications of filtering as well as limits of the applied filtering technology in OSPS today. Finally, we make four suggestions to improve filtering in Korea, addressing issues such as clarifying the limits and responsibilities of OSPS, searching for cooperative solutions between copyright holders and OSPS, standardizing the filtering technology to enable compatibility among different filtering techniques, and others.