• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.268-273
• /
• 2016

This study was conducted to clarify the differences in habitat structure and amphibian and reptile (herpetofauna) populations between before and after thinning in the coniferous and deciduous forests from June to September 2014 and 2015 at the Mt. Maewha of Hongcheon, Gangwon province, Korea. Forest structure was dramatically changed after thinning. Coverage of understory and mid-story were decreased while volume and number of downed trees were increased after thinning. We used line transect sampling method on a total of 4 transect lines, 2 lines in each forest type. 119 individuals of 5 amphibian species and 5 individuals of 3 reptile species were recorded. Mean number of amphibian species were decreased after thiining in the coniferous forest. There was no observed reptiles after thinning in the coniferous and deciduous forests. Detailed monitoring with different area, frequency and intensity might be needed to clarify more precise differences characterisitics of herpetofauna by thinning.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.397-403
• /
• 2010

This study was conducted to investigate the changes in soil temperature, soil moisture content, light availability (photosynthetically active radiation, PAR) and diameter growth in 46-year-old Korean pine (Pinus koraiensis Siebold et Zuccarini) plantation located in Gwangneung experimental forest after 4 years from thinning. Three different thinning intensities [control, 45%(T45), and 60%(T60) basal area reduction] were applied in 2004. Mean soil temperature and soil water content were $8.9^{\circ}C$ and 14.3% for control, $10^{\circ}C$ and 16.1% for T45 and $10.2^{\circ}C$ and 16.1% for T60, respectively. Mean soil temperature and moisture content were significantly different among the treatment plots (p<0.05). Mean PAR in control, T45 and T60 was 44, 143 and178 ${\mu}mol/m^2$/sec, respectively and the differences were also statistically significant among the treatment plots (p<0.05). Mean annual diameter growth in control, T45 and T60 was 0.4, 1.5 and 1.2 mm, respectively. Diameter growth of Pinus koraiensis was steadily increased after thinning in comparison to control. Consequently, the results suggested that soil temperature, soil moisture content and light availability were likely to last beyond the 4 years after thinning in this Korean pine plantation.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.263-268
• /
• 2008

Estimates of genetic gain (in volume growth) and diversity (expressed as status number, $N_s$) were determined in a clonal seed orchard of Pinus koraiensis. The genetic thinning was based on clonal breeding values (represented by general combining ability) obtained from progeny tests, clonal fertility estimated by strobilus production, and clonal size variation determined by the ramet numbers per clone. Parental GCA values for volume growth were calculated, based on height and diameter at breast height measured from field trials. Clonal fertility was estimated from the assessments of strobilus production over twelve years from 1991 to 2003, and used for the calculation of status number. There are 179 clones and 5,268 ramets in 12ha area of P. koraiensis clonal seed orchard. Genetic gain and diversity estimates were determined under assumptions of 30% pollen contamination and inferior genetic value of contaminating pollen. Genetic gain increased as thinning rates were set from 10% to 60%. However, for the higher thinning intensities, the increase of genetic gain was not remarkable. Genetic thinning by means of truncation selection resulted in a greater genetic gain but a large decrease in status number. Status number was represented around 40 clones for 10% through 60% thinning intensities, but for the higher thinning intensities, it was a bit fluctuated. Based on the present results, it could be concluded that thinning rate should not be stronger than 60% to optimize genetic gain while conserving genetic diversity. Consequently 50% or 60% thinning rate might be appropriate for genetic thinning in the clonal seed orchard of P. koraiensis. The effect of pollen contamination on the genetic gain and the consequence of genetic thinning for seed production in the clonal seed orchard, and seed orchard management scheme were also discussed.

• Journal of Korean Society of Forest Science
• /
• v.101 no.4
• /
• pp.592-598
• /
• 2012

Forest stand yield and its changes along with 10 thinning scenarios were estimated using a forest stand yield model for six major tree species in Korea, such as Pinus densiflora in Gangwon province, Pinus densiflora in other regions, Pinus koraiensis, Larix leptolepis, Quercus acutissima Carruth, Quercus mongolica. The 10 thinning scenarios were generated based on a number of constraints and assumptions. For instance, it was assumed that thinning is implemented between 15 years and 40 years with 5 year period and its duration should be at least 10 years. Also, the overall removal rate from the thinning treatments was assumed to be not greater than 60%. Under the 10 scenarios, the overall stand yield volumes from thinning and final harvesting were estimated for each species and site index. The results showed that highest yield volumes were obtained for Pinus densiflora in Gangwon province, Pinus koraiensis and Quercus mongolica when 30% of basal areas were thinned at 20 and 40 years, while highest yield volumes were obtained for Pinus densiflora in other regions and Larix leptolepis when 20% of basal areas were thinned at 20, 30 and 40 years. Those two scenarios gave the same amount of highest yield volume for Quercus acutissima Carruth. Also the results indicated that thinning treatment is effective to increase overall stand yield volume and its effects are larger with a higher site index. The largest thinning effects were found in Pinus densiflora in Gangwon province (28%) and Larix leptolepis (25%), while limited in Pinus koraiensis (12%). The forest stand yield model, used in this research, could be an effective tool for estimating the stand dynamics with various thinning treatments, but it could be improved in a further research that validates its applicability in the field.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.28-35
• /
• 2001

To investigate the effects of nitrogen fertilization and thinning on growth and nutrition of current-year needle and twigs in Pinus koraiensis we treated two clone banks with three levels of nitrogen fertilizer in Yongin and Chuncheon, and also thinned two plantations with three intensities in Yangpyeong. The fertilization and thinning effects greatly varied depending on study sites and stand ages. However, dry weights of needle and twig increased following low nitrogen fertilization in older stands. Moderate thinning increased dry weight and nitrogen concentration of twigs in the 12-year-old stand.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.132-138
• /
• 2016

The objectives of this study were to infer the parameters of forest stand growth functions of STEMS for Cryptomeria japonica stands of Jeju Hannam Experimental Forest, Korea Forest Research Institute, and to investigate the effects of thinning regimes on the patterns of stand growth and carbon absorption. The forest stand growth functions for the potential diameter growth, modifier, crown ratio and mortality are the major ones composing the independent-tree/distance-free forest stand growth simulator, STEMS. The parameters were inferred using the sets of growth data obtained from stem analyses of 39 trees, chosen from 13 sample plots of the forest stands. The effects of thinning regimes on the patterns of stand growth and carbon absorption were investigated by simulating the stand growth patterns of the case study stand with 3 different thinning regimes: no-thinning, early thinning with low intensity and late thinning with high intensity using the simulator. According to the results of the analyses, the different thinning regimes cause significant effects on the growth patterns of average DBH, average height, diameter distribution and stand volume as well as the amount of carbon absorptions.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.45-53
• /
• 2008

The effect of thinned trees which are produced from forest thinning on forest fire was studied in this work. To investigate the effect of thinning slash, Yang-yang, In-je, and Ga-pyeong-gun were selected as thinning-areas and non-thinning areas. The research was carried out with the variations of tree's types, area's characteristics, thinning strength, thinning types, and pile types of thinned tree. The survey areas of 14 areas were selected at Yangyang-gun(5 areas), Gapyeong-gun(4 areas), and Inje-gun(5 areas), and on-the-spot investigations were carried out at the thinning areas of 9 and the non-thinning areas of 5, respectively. Non-thinning areas of 5, which are adjacent to thinning areas, were selected for the comparison with thinning areas and for the analysis of risk of forest fire. It is considered that forest fire have no chance to diffuse to a tree trunk because the height of thinned trees was lower than 1 m. However, it is considered that forest fire may affect directly to a tree trunk if it spread to piled thinned tree because there was no space between thinned trees and trees. Furthermore, it was found that re-ignition had a chance to occur due to lots of piled thinning trees.

• Korean Journal of Plant Resources
• /
• v.30 no.1
• /
• pp.96-100
• /
• 2017

Shoot and the fruit growth characteristics of 'Campbell Early' grape cultivar were investigated after vine thinning using the main branch leader. Before vine thinning, branch diameter was 11.8 mm, but it decreased to 9.3 mm after vine thinning. The number of shoots per vine increased to 55.9-64.5 after vine thinning. The number of fruit clusters per shoot was higher (1.5-1.75) in the vine thinning plot than in the control (0.8). Consequently, the number of clusters per vine was 98.1-106.5 in the vine thinning plot, while that in the control was 24.4-28.0. However, soluble sugar content (SSC) and tartaric acidity showed no significant differences between the control and the vine thinning plot. The proportion of >351 g fruit cluster weight after vine thinning (81.0%) was significantly higher than that of the control (32.5%). These results imply that fruit quality based on the variation in cluster weight and fruit yield was enhanced by vine thinning using the main branch leader.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.657-662
• /
• 2006

This study was carried out to investigate the changes in soil chemical properties after thinning for a Quercus acuta stand in Wan-do Arboretum, Jeollanam-do. The stem density after thinning was determined referring to that of Quercus acutissima with 10 cm diameter at breast height and soil samples were collected 7 years after thinning. There was no considerable difference in soil pH values after thinning. However, the concentrations of soil organic matter, total nitrogen and available phosphorus significantly increased after thinning. In addition, thinning significantly increased cation exchange capacity (C.E.C) and the concentrations of exchangeable cations ($K^+$, $Na^+$, $Ca^{2+}$, and $Mg^{2+}$). From this study, it was revealed that the nutrient concentrations of this study site were generally lower than those of other forest soils. Therefore, it is need to improve the warm temperate forests through thinning and to develop forest treatment for regeneration.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1731-1738
• /
• 2021

The objective of this study was to extract individual trees and tree heights using UAV drone images. The study site was Gongju national university experiment forest, located in Yesan-gun, Chungcheongnam-do. The thinning intensity study sites consisted of 40% thinning, 20% thinning, 10% thinning and control. The image was filmed by using the "Mavic Pro 2" model of DJI company, and the altitude of the photo shoot was set at 80% of the overlay between 180m pictures. In order to prevent image distortion, a ground reference point was installed and the end lap and side lap were set to 80%. Tree heights were extracted using Digital Surface Model (DSM) and Digital Terrain Model (DTM), and individual trees were split and extracted using object-based analysis. As a result of individual tree extraction, thinning 40% stands showed the highest extraction rate of 109.1%, while thinning 20% showed 87.1%, thinning 10% showed 63.5%, and control sites showed 56.0% of accuracy. As a result of tree height extraction, thinning 40% showed 1.43m error compared with field survey data, while thinning 20% showed 1.73 m, thinning 10% showed 1.88 m, and control sites showed the largest error of 2.22 m.