• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.143-152
• /
• 1998

해안구조물 설치시 기초지반의 안정성 해석을 위한 파랑에 기이한 액상화 메카니즘을 과잉간극수압(excess pore pressure) 현상과 관련하여 논의하였다. 과잉간극수압 발생 메커니즘에 있어서 두 가지 형태, 즉 변동과잉간극수압 (Oscillatory excess pore pressure) 및 잔류과잉간극수압 (Residual excess pore pressure) 각각에 기인한 액상화의 특성을 구명하였다. 또한, 과잉간극수압 및 해저지반의 액상화 가능성에 대한 평가공정을 제시하였는데 이는 모형실험과 현장관측자료에 의해 그 적용성이 검증되었다. 이러한 평가공정(Assessment Procedures)은 투수성 해저/기초 지반의 액상화를 추정하는데 이용될 수 있다. 해안구조물 기초 설계 및 해저 지반의 안정성 평가시 액상화의 가능성 또는 과잉간극수압의 적절한 평가.고려가 무엇보다 중요하다고 사료된다.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.151-166
• /
• 2002

Groundwater development as a means of acquiring subsidiary water resource is very important for the persistent security of water resource. Nowadays, pneumatic fracturing technology which was developed in the advanced countries is applied for increasing pumping rate and eliminating contaminants. This study gives an experimental data to clarify permeability characteristics of the single discontinuity which is newly developed or increased in aperture by the pneumatic fracturing or damage propagation of the natural barrier for the nuclear waste disposal. On the basis of understanding the relationship between permeability and hydraulic aperture the result could apply as one of the basic data for researches concerned with increasing pumping rate and eliminating contaminants. Hydraulic aperture is decreased exponentially with increasing confining pressure and proportioned to permeability in the same confining pressure. Especially, with the increasing aperture permeability of coarse- and medium- grained granite shows the more rapid increasing than that of fine- grained granite.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.86-86
• /
• 2020

수리구조물에 관한 기존 연구들은 대부분 기능성과 안정성 측면에서 본체에 작용하는 유체력에 대한 안정성에 주안점을 두고 있다. 수리구조물 상·하류의 수위차에 기인한 기초지반내의 흐름 및 간극수압 변화는 하천 구조물의 안정성을 연구하는데 매우 중요하다. 해양에서는 파랑하중에 의한 과잉간극수압이 액상화를 발생시켜 해안구조물의 안정에 큰 영향을 미치는 것으로 보고되며, 이에 관련 연구들이 활발하게 진행되고 있다. 반면, 하천구조물 주변 지반의 흐름 및 간극수압 뿐 아니라, 액상화에 관한 연구는 아직 미진한 실정이다. 본 연구에서는 수리구조물 주변의 유동 및 와동 현상 뿐 아니라, 수위차에 따른 지반 내부 유동장과 간극수압에 관한 특성을 분석하기 위해 유체-구조물-지반 비선형 상호작용을 고려할 수 있는 수치수조를 새롭게 제안하였다. 그리고 제안하는 수치수조의 타당성 및 유효성을 검증하기 위해 기존 실험값과 비교·검토를 수행하였고, 그 결과는 거의 유사한 경향을 나타내었다. 또한 이 수치수조에 다양한 입사조건(상·하류 수위차)에 적용하여 유체-구조물-지반의 비선형동적상호간섭 해석을 수행하였다. 최종적으로 수치수조에서 측정한 구조물 주변의 유동, 와동, 수위로부터 수리특성을 논의하였다. 게다가 지반내의 흐름과 간극수압을 측정하여 상·하류 수위차가 수리구조물의 안정성에 미치는 영향을 분석할 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.179-185
• /
• 2008

Simulating combustion tests have been performed to elucidate the effect of baffle gaps on the optimal damping characteristics in liquid rocket combustors where coaxial injectors are installed. Amplitude of pressure oscillation in model combustion chamber and the combustion stability margin are used to quantify the damping capacitance of baffles. Satisfactory agreement has been achieved with the results of cold acoustic tests. Present results have shown that the optimal gap for high acoustic damping capacity has also the large combustion stability margin in simulating combustion tests. Therefore, the present results can be utilized to determine the baffle length and optimal gap in full-scaled rocket combustors.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.4
• /
• pp.1-11
• /
• 2003

In order to measure aperture variation dependent on normal stress and to characterize on relationship between aperture variation and hydraulic conductivity this study measured apertures of rock fractures under a high resolution confocal laser scanning microscope (CLSM) with application of five stages of uniaxial normal stresses. From this method the response of aperture can be continuously characterized on one specimen by different loads of normal stress. The results of measurements showed a rough geometry of fracture bearing non-uniform aperture. They also revealed different values of aperture variations according to the load stages on each position along a fracture due to the fracture roughness. Laboratory permeability tests were also conducted to evaluate the changes of permeability coefficients related to the aperture variations by different loads. The results of permeability tests revealed that the hydraulic conductivity was not reduced at a fixed rate with increase of normal load. Moreover, the rates of aperture variations did not match to those of hydraulic conductivity. The hydraulic conductivity calculated in this study did not follow the cubic law, representing that the parallel plate model is not suitable to express the fracture geometry corresponding to the results of aperture measurements under the CLSM.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.583-594
• /
• 1994

One of the major elements of a natural landslide is the increase of the pore water pressure in a weakened layer. Therefore, the measurement of the pore water pressure in the layer is important. This work is a laboratory model study of the measurement of the pore water pressure with regard to the confined groundwater level, the permeability of the crack zone and the weathering degree of the weakened layer. By the model of the Tertiary period failure type and the Colluvium failure type, the reactions of the pore air pressure and the pore water pressure were measured in the weakened layer according to the permeability of the filter on the condition of the confined groundwater states. On the reaction phase of the pore pressure according to the during time, the Tertiary period failure type proved to be a step type and the Colluvium failure type turned out to be a wave type. The reaction ratios of the pore water pressure in the Tertiary period failure type are higher than the Colluvium failure type, decrease according to increasing of the weathering degree of the weakened layer.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.1
• /
• pp.17-25
• /
• 2024

The Voids in the Mineral Aggregate (VMA) within asphalt mixtures play a crucial role in defining the mixture's structural integrity, durability, and resistance to environmental factors. Accurate prediction and optimization of VMA are essential for enhancing the performance and longevity of asphalt pavements, particularly in varying climatic and environmental conditions. This study introduces a novel machine learning framework leveraging ensemble machine learning model for predicting VMA in asphalt mixtures. By analyzing a comprehensive set of variables, including aggregate size distribution, binder content, and compaction levels, our framework offers a more precise prediction of VMA than traditional single-model approaches. The use of advanced machine learning techniques not only surpasses the accuracy of conventional empirical methods but also significantly reduces the reliance on extensive laboratory testing. Our findings highlight the effectiveness of a data-driven approach in the field of asphalt mixture design, showcasing a path toward more efficient and sustainable pavement engineering practices. This research contributes to the advancement of predictive modeling in construction materials, offering valuable insights for the design and optimization of asphalt mixtures with optimal void characteristics.

• The Korean Journal of Archival Studies
• /
• no.43
• /
• pp.43-70
• /
• 2015

The value and validity of elite oral materials have been questioned because of their gaps with 'fact'. The purpose of this article is to analyze these gaps and to propose some solutions that can reduce the gaps. According to the analysis of this article, there are three types of the gaps that qualitatively differ from each other. The first type of the gaps is produced in the process of generation of memory. This type is made because informants cognize and memorize the facts that exist outside themselves. Selective cognition, selective memory and individual experience come under this category. The second type is produced in the process of preserving the memory. Forgetting and memory transformation are main examples of this type. The third type is produced in the process of the interviews with the informants. False statements or lies fall into this category. The main conclusions are as follows. 1) all gaps in oral materials are not necessarily negative. It is because Some of these gaps- the first and the second type- are not only parts of the real world but also very useful for interpreting the world. 2) The third type of the gaps are very harmful and it is need to be eradicated or reduced. For this, this article proposes some solutions.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.39-48
• /
• 2001

액상화 발생후 과잉간극수압 소산 특성을 파악하기 위하여 포화된 수평 모래지반에 대하여 1-g 진동대시험을 수행하였다. 진동대시험에는 주문진 표준사와 영종도 세사를 사용하였으며 상대밀도를 dir 20~30% 사이가 되도록 조성하였다. 간극수압계, 가속도계 그리고 LVDT 등으로 시험중의 지반거동을 계측하였으며, 4Hz의 sine 파를 0.15g에서 5초간 5회 반복하여 작용시켰다. 진동대시험을 분석한 결과 액상화 발생후 과잉간극수압의 소산속도는 그 지반의 투수성뿐 아니라 과잉간극수압 소산시 입자의 침강거리와 직접 관련이 있는 지반의 침하량에도 크게 영향을 받는 것으로 나타났으며, 이 과정을 침강모래 이론으로 모델링하였을 때 입자의 침강속도와 투수계수 사이의 비례 관계는 침강모래 이론에서의 가정한 것과는 달리 모래의 종류에 따라 차이를 나타내었다. 또한 Terzaghi의 압밀이론으로는 액상화 후 과잉간극수압의 소산과정을 적절히 모사할 수 없었다.

• Tunnel and Underground Space
• /
• v.26 no.4
• /
• pp.283-292
• /
• 2016

A computer program code was developed to estimate hydraulic behavior of the 2-D connected pipe network system, and implemented to evaluate the effect of joint aperture on hydraulic parameters of fractured rock masses through numerical experiments. A total of 216 stochastic 2-D DFN(discrete fracture network) blocks of $20m{\times}20m$ were prepared using two joint sets with fixed input parameters of joint orientation, frequency and size distribution. Two different cases of joint aperture variation are considered in this study. The hydraulic parameters were estimated for generated 2-D DFN blocks. The hydraulic anisotropy and the chance for equivalent continuum behavior of the DFN system were found to depend on the variability of joint aperture.