• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2002

Join operation exert a great effect on the performance of system in temporal database as in the relational database. Especially, as for the temporal join, the optimization of interval partition decides the performance of query processing. In this paper, to improve the efficiency of parallel join query in temporal database. I proposed Minimum Interval Partition(MIP) scheme that time interval partitioning. The validity of this MIP algorithm that decides minimum breakpoint of the partition is proved by example scenario and I confirmed improved efficiency as compared with existing partition algorithm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.107-112
• /
• 1984

수동 Wave-front curvature ranging 방법의 통계적성능에 대한 일반적 결과가 유도된다. 센서들의 비선형 및 부동간격 센서들의 운동효과로 인한 표적거리의 편의(bias) 및 편차9variance)가 센서간의 운동이 상관관계를 가지고 있을 때 유도된다. 이 논문은 센서운동이 정규분포(normal distribution)를 가지며 평균이 0, 같은 편차 및 투시할 수 있는 higher moment를 가지고 있다고 가정한다. 유도된 일반적 결과를 이용하여 거리편의 및 편차는 표적거리, 방위, 센서운동의 상관계수 및 방향각(heading)표준편차 변화에 대해 그림으로 나타나 있다. 표적거리가 센서간격보다 아주 큰 경우 센서간격이 감소할수록, 표적거리가 증가할수록, 거리편의 및 편차는 증가한다. 상관계수가 증가할수록 거리편의는 직선적으로 감소하며, 거리편차는 센서 방향각 오차가 클 때 최소가 되는 상관계수가 존재하며 이는 표적거리, 방위 및 센서간격의 복합함수이다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.41-42
• /
• 2018

텍스트 문서 영상으로부터 단어를 검출하고, LLAH(locally likely arrangement hashing) 알고리즘을 이용하여 이웃 단어 사이의 기하 관계를 표현하는 특징 벡터를 계산한 후, 특징 벡터를 비교함으로써 텍스트 문서를 효과적으로 인식하거나 검색할 수 있다. 그러나, 이는 문서 내 각 단어가 정확하고 강건하게 검출된다는 전제를 필요로 한다. 본 논문에서는 텍스트 내 각 라인을 검출하고, 각 라인 내에서 단어 사이의 간격과 글자 사이의 간격을 깊은 신경망(deep neural network)을 이용하여 학습하고 분류함으로써, 보다 카메라와 텍스트 문서 사이의 거리나 방향이 동적으로 변하는 조건에서 각 단어를 강건하게 검출하는 방법을 제안한다. 모바일 환경에서 제안된 방법을 구현하였으며, 실험을 통해 단어 사이의 간격과 글자 사이의 간격을 92.5%의 정확도로 구별할 수 있으며, 이를 통해 동적인 환경에서 단어 검출의 강건성을 크게 개선할 수 있음을 확인하였다.

• Journal of Energy Engineering
• /
• v.1 no.1
• /
• pp.66-75
• /
• 1992

The performance of heat transfer through double pane window has been investigated using experimental and numerical methods. The range of the gap distance between glasses are 0.5-10 cm. The convection heat transfer plays the dominant role for the case of the wide gap distance together with the large Rayleigh number and thereby, reduces the enhanced thermal resistance due to the increased air gap, while the conduction heat transfer does the major role for the case of small gap distance. In order to enhance the thermal insulation of the double pane window, the heat transfer of triple pane window, which is constructed to put one more glass at the middle of the double pane, is investigated to check the reduction of the convection heat transfer together with the effect of the radiation shield due to the presence of the additional glass. Further, a spacer is installed at the middle height of the double pane, and the effect of which on the suppression of the convective heat transfer is analyzed carefully, using experimental and numerical methods. For the case of the spacer-installation, the amount of energy saving is considered about 10%, but the energy saving increases a lot to 30-50% for the case of triple pane window, due to the substantial radiation shield effect of the presence of the additional glass.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.435-439
• /
• 2013

Bacillus amyloliquefaciens M27 was selected as a control agent for the biological control of cucumber powdery mildew. The new mixture of B.amyloliquefaciens M27 and plant (Eucalytus) extract was developed to improve the control activity of B.amyloliquefaciens M27 against cucumber powdery mildew. The mixed formulation showed the high preventive and curative control effect against cucumber powdery mildew when it was diluted at 500 times and foliar-sprayed. Its control effect was higher in preventive spraying than curative spraying. When 500-fold diluted solution of the formulation was sprayed preventively four times at five-day intervals, three times at seven-day intervals and twice at ten-day intervals, the diseased leaf area was shown to be 4.4%, 8.0%, 27.9%, respectively; Whereas the diseased leaf area in the control plot was 45.4%. When the 500-fold diluted formulation was sprayed curatively four times at five-day intervals, three times at seven-day intervals and twice at ten-day intervals after occurred cucumber powdery mildew, the diseases leaf area was 11.5%, 25.2%, 51.8%, respectively; whereas in the control plot, the diseases leaf area was 64.3%. When the 500-fold diluted formulation was treated four times at five-day intervals in the plastic house, its control effect was higher than that treated three times at seven-day intervals and twice at ten-day intervals. As the results, the mixed formulation of B.amyloliquefaciens M27 and plant extract could be a promising candidate of bio-fungicides for the environment-friendly control of powdery mildew of cucumber.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1015-1024
• /
• 2015

An experiment of composite beam was performed which utilized glass fiber reinforced polymer (GFRP) plank as the permanent formwork with cast-in-place high strength concrete. This research analyzed the flexural failure behavior of composite beam by setting the sand coated at GFRP bottom surface, the perforation and interval of the GFRP plank web, and the width of the top flange as the experimental variables. As a result of the experiments for effectiveness of sand attachment in case of not perforated web, approximately 43% higher ultimate load value was obtained when the sand was coated than not coated case. For effectiveness of perforation and interval of gap, approximately 23% higher maximum load value was seen when interval of the perforation gap was 3 times and the fine aggregate was not coated, and approximately 11% higher value was observed when the perforation gap was 5 times on the coated specimen. For effectiveness of top flange breadth, the ultimate load value was approximately 12% higher in case of 20mm than 40mm width.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.205-215
• /
• 2006

In this study 3-D shell FEM model was applied to analyze the behavior of curved steel box girders stiffened by diaphragms. The reliability of the analytical method has been proved by comparing with the existing results. It was also found from this analysis that main factors affecting a distortional stress are length of a girder, curvature of the girder, and spacing of diaphragms. A modelled bridge with 30m of span length and 40m of radius was analyzed to find an optimum spacing of diaphragm, and as a result of applying different spacings, 5m was found to be most appropriate to control the stress ratio regulated by specifications. In the effect of diaphragm shape, the rhamen-typed diaphragm is found to be more effective than the fully filled-up one in the range of opening ratio of 0.4 to 0.6. But, the fully filled-up diaphragm had more efficiency in terms of reducing the distortional stress than X-truss typed diaphragm.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.419-425
• /
• 2015

When a train is delayed because of a disturbance, the time interval between successive trains increases and high-frequency metro lines can become unstable. Time interval control is therefore necessary in preventing such instabilities. In this paper, we propose an optimal interval control algorithm that is easy-to-implement and that guarantees system stability. In the proposed method, the controlled trains are determined from the time interval deviations between successive trains; the control algorithm for staying time is designed by use of a discrete traffic model to ensure an optimal time interval between successive trains. The results of a computer simulation are also given to demonstrate the validity of the proposed algorithm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.292-292
• /
• 2015

최근 상수관망의 물 공급 과정에서 여러 가지 원인으로 인해 물의 손실에 따른 비용손실이 발생하고 있다. 급수시스템의 경우에는 파열 및 누수발생과 관련되어 사용되는 비용은 분실되는 물의 직적비용, 급수시스템 수리에 따른 공사비용, 공급중지와 관련된 사회적 비용이 있다. 파열 및 누수를 신속하게 감지하는 것은 물 손실에 의해 발생하는 직접 및 간접비용을 줄일 수 있다. 그러나 국내의 경우 정기적으로 매년 1회 시행되는 상수관로에 대한 누수탐지작업으로 신속한 감지 및 즉각적인 대처를 할 수 없는 실정이다. 본 연구에서는 수도관에서 발생되는 파열 및 누수를 탐지하기 위하여 블록 유입부에 설치된 유량계의 샘플링 간격의 영향에 대한 연구를 실시하였다. 적응칼만필터 알고리즘을 이용한 가변 샘플링 간격은 최대 최소 샘플링 간격과 정규화된 잔차의 상한값과 하한값 도입하여 제시하였다. 샘플링 간격의 효과를 강조하기 위해 사인 곡선, 사다리꼴 파열, 불규칙 잡음으로 구성된 가상의 유량 데이터로 알고리즘에 대한 검증실험을 진행하였고 실험 결과 샘플링 간격이 길수록 긴 시간 동안 누수 및 파열에 대한 작은 잔차를 발생시켰다. 모의실험결과 샘플링 주기를 변경함으로써 분석에 필요한 유량 데이터의 샘플수를 크게 줄일 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.131-143
• /
• 2000

Several theoretical analyses are performed to predict the vertical load on embankment piles with cap beams. The piles are installed in a row in soft ground below the embankment and the cap beams are placed perpendicular to the longitudinal axis of the embankment. Two failure mechanisms such as the soil arching failure and the punching shear failure are investigated according to the failure pattern in embankment on soft ground supported by piles with cap beams. The soil arching can be developed when the space between cap beams is narrow and/or the embankment is high enough. In the investigation of the soil arching failure, the stability in the crown of the arch is compared with that above the cap beams. The factors affecting the load transfer in the embankment fill by soil arching are the space between cap beams, the width of cap beams and the soil parameters of the embankment fill. The portion of the embankment load carried by cap beams decreases with increment of the space between cap beams, while it increases with the embankment height, the width of cap beams, the internal friction angle and cohesion of the embankment fill. Thus, the factors affecting load transfer in embankment should be appropriately decided in order to maximize the effect of embankment load transfer by piles.