• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.33-40
• /
• 2009

The critical lag of crosswalk pedestrians is an important parameter in analyzing traffic operation at unsignalized crosswalks, however there is few research in this field in Korea. The purpose of this study is to develop a model to estimate the critical lag. Among the elements which influence the critical lag, the age of pedestrians and the length of crosswalks, which have fuzzy characteristics, and the each lag which is rejected or accepted are collected on crosswalks of which lengths range from 3.5 m to 10.5 m. The values of the critical lag range from 2.56 sec. to 5.56 sec. The age and the length are divided to the 3 fuzzy variables each, and the critical lag of each case is estimated according to Raff's technique, so a total of 9 fuzzy rules are established. Based on the rules, an ANFIS (Adaptive Neuro-Fuzzy Inference System) model to estimate the critical lag is built. The predictability of the model is evaluated comparing the observed with the estimated critical lags by the model. Statistics of $R^2$, MAE, MSE are 0.96, 0.097, 0.015 respectively. Therefore, the model is evaluated to explain the result well. During this study, it is found that the critical lag increases rapidly over the pedestrian's age of 40 years.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.107-120
• /
• 2003

Over the decades, a lot of studies have dealt with the traffic characteristics and phenomena at a merging area. However, relatively few analytical techniques have been developed to evaluate the traffic flow at the area and, especially, the ramp merging capacity has rarely been. This study focused on the merging behaviors that were characterized by the relationship between the shoulder lane flow and the on-ramp flow, and modeled these behaviors to determine ramp merge capacity by using gap acceptance theory. In the process of building the model, both an ideal mergence and a forced mergence were considered when ramp-merging vehicles entered the gap provided by the flow of the shoulder lane. In addition, the model for the critical gap was proposed because the critical gap was the most influential factor to determine merging capacity in the developed models. The developed models showed that the merging capacity value was on the increase as the critical gap decreased and the shoulder lane volume increased. This study has a meaning of modeling the merging behaviors including the forced merging type to determine ramp merging capacity more precisely. The findings of this study would help analyze traffic phenomena and understand traffic behaviors at a merging area, and might be applicable to decide the primary parameters of on-ramp control by considering the effects of ramp merging flow.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.59-69
• /
• 2003

Signalized intersections are widely used in urban street network. However, it was reported that a roundabout is better than a signalized intersection in terms of delay when the approaching traffic volume for each bound is low. The objective of this study is to develop entry capacity models of roundabout and establish the warrant for signalized intersection based on the delay. The entry capacity of a roundabout is determined by the circulating traffic volume and the geometric design of the roundabout such as the diameter of central island, entry lane widths, and the circulating roadway width. The traffic and geometric characteristics of four roundabouts were collected and analyzed. The study reveals that; i)among the geometric features, the diameter of central island and the circulating roadway width influence the entry capacity, and ii)even though it is difficult to compare the models of each country due to different geometric features considered in the models, the models developed in this study show higher capacity than the models from Israel or Germany. These seem to be attributed to the facts that; i)the outside diameters of the roundabouts selected in this study are larger than in the other studies, and ii)the acceptable gap in Korea is smaller than that in the other countries. In order to compare the performances of round- about and signalized intersection, the performance of roundabouts was evaluated with the SIDRA. The simulation was conducted only for the roundabouts composed of single lane. According to the result of the analysis, it may be concluded that when the approaching traffic volume for each bound is lower than 600pcph, a roundabout is better than a signalized intersection in terms of its operational performance.

• Proceedings of the KOR-KST Conference
• /
• 2003.02a
• /
• pp.3-18
• /
• 2003

본 논문은 ATMS와 ATIS에서 요구되는 교통관리 및 정보제공의 효과분석을 위해, 운전자의 주행 및 경로선택 의사결정과 교통제어에 대한 반응등 운전자 행태를 모의실험에 반영함으로써 교통시스템의 실시간 특성을 모사할 수 있는 모형을 구축하고 이를 기반으로 하는 미시적 교통 모의실험기를 개발하는 것을 목적으로 하였다. 본 연구에서는 운전자, 차량, 교통망, 검지 및 신호시스템, 교통정보제공시스템 등을 교통시스템의 주요 구성요소로 설정하였으며 운전자 및 차량특성, 차두시간분포와 차량발생모형, 차량주행모형, 차로변경 및 간격수락모형, 경로선택모형을 주모의실험모형을 구성하는 부모형으로 결정하였다. 따라서 본 논문에서는 각각의 부모형들에 대한 최근의 연구결과들을 검토하고, 현실모사 능력과 함께 다른 부모형들과의 연계, 모의실험기의 구현상에서의 적합성 등을 고려하여 적정모형의 선정 및 수정, 새로운 부모형의 구축을 수행하였다. 구축된 부모형을 통합하여 교통모의실험기를 개발하였으며 구축된 모형의 타당성 및 적용성 검토를 위해 현장자료 및 가상자료를 이용한 검증을 수행하였다. 검증결과 모형의 목적인 교통제어 및 정보제공등의 시스템 대안의 평가에 이용 가능한 것으로 나타났다. 또한 본 논문의 연구결과는 교통제어 및 정보제공전략 대안의 평가뿐만 아니라 차량추종 및 차로변경 등의 미시적 교통모형 연구, 동적기종점 통행량 추정, 동적통행배정의 연구에도 활용할 수 있을 것으로 판단된다. 본 논문의 연구모형은 현단계에서는 현실의 모사 및 분석을 위한 도구보다는 새로운 대안들간의 비교평가를 위한 도구로 활용할 수 있을 것으로 판단된다. 이에 따라 현실모사의 정확도를 확보하기 위한 검증 및 개선이 필요할 것이며, 각 부모형들에 대한 계속적인 연구와 새롭게 발표되는 연구결과를 수용한 지속적인 개발이 필요할 것이다.유기적인 연계에 있음을 밝히고 있다. 건설을 위한 정책적 시사점과 동북아 연구개발정보 Portal 및 APEC APGrid 연구망 등의 구체적인 정보인프라 구축방안을 도출하였다.술 주기를 도출하고, 산업 내 평균 권리 청구 항목 수를 이용하여 각 산업의 기술 범위를 비교하였다. 각각의 동적 분석을 통해 시간에 따른 변화 양상이 관찰하였고, ANOVA 분석을 이용하여 통계적 유의성을 검증하였다. 본 연구는 현재의 기술 패러다임 내에서 Pavitt이 제시한 산업 분류의 근거를 보충 설명하였고 특허 정보를 이용하여 기술혁신의 산업별 유형에 대한 폭넓은 분석방법을 제시하였다.별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9%

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.145-157
• /
• 2004

Microscopic freeway simulation models project the uncertain values of performance measures for subject traffic conditions by explaining drivers' driving behavior with lane changing and car-following models. However, the existing lane changing models are limited to gap acceptance oriented passive behavior of drivers and not able to capture more-or-less aggressive driving behavior(e.g. cut-in lane changing) ordinarily obseved in field. This paper suggests the definition of cut-inlane changing and presents its characteristics based on the findings from two different freeway on- and off-ramp sections. In addition, this paper proposes a new lane changing model capable of handling both passive and active drivers' driving behavior for better performance of simulations. The proposed lane changing model was tested with Hanyang Simulatin (HYTSIM), a microscopic freeway simulation program developed for this study. The HYTSIM simulation results reflecting the performance of the proposed lane changing model were compared against the field data. The test results showed that the distribution of gaps collected when vehicles change lanes were statistically identical to the field data at 95% confidence level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.573-582
• /
• 2014

Since there is no clear installation criteria on minimum spacing between signalized intersection and minor road, many problems have occurred in terms of traffic operation and safety. Even though many studies about entrance/exit intersection have been done in operational aspects, there is no specific and detailed research between the signalized intersection and minor road by now. Thus, this research suggests the optimal spacing between signalized intersection and minor road considering traffic operation and safety. Also, survey on vehicle behavior was conducted in this research. In conclusion, by suggesting the required minimum spacing between signalized intersection and minor road, it can be contribute in establishing and operating the installation criteria between signalized intersection and minor road.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.107-115
• /
• 2011

Since 2009 The Korean National Police Agency has been pushed "permissive left-turn" forward in order to making progress in Korean traffic operations system. Preceding researches manuals and guidelines present 6 standards(# of accidents # of lanes, pedestrian volume sight # of permissive left-turn lanes vehicle volume) as installation permissive left-turn. But in practical affairs it is most important that secure enough Gap-time between permissive left-turn vehicle and opposite through lane vehicle to make permissive left-turn vehicle move safer and more efficiently. This study suggests applying gap acceptance theory in microscopic model to permissive left-turn installation standards. Analysis methods of this study are field data survey statistical analysis and microscopic simulation analysis. This study collected field data by using AVI recording and measured permissive left-turn vehicle intersection passing time(T1) and against the opposite through lane vehicle Gap-time(T2). And statistical analysis performed about two values that measured before to predict the functionality between T1 and T2. These studies to overcome the limit of sample size carried out a microscopic simulation(VISSIM) plan and collect more samples to input statistical analysis.

• International Journal of Highway Engineering
• /
• v.19 no.4
• /
• pp.61-68
• /
• 2017

PURPOSES : A complete signal system is not always the best solution for improving traffic operation efficiency at intersections. An alternative solution is to use a Protected Permitted Left Turn (PPLT) operation method. However, the PPLT method needs to be developed after a detailed study of driving tendencies, most notably the gap acceptance behavior, for successful implementation. In this study, the gap acceptance behavior was investigated under various variables and weather conditions, especially under rain, and the results were compared to the case of normal weather. The results of this study will be helpful in introducing the PPLT method, and are important considering the tendency of attempting unprotected left turns that is extremely common in Korean drivers. METHODS : Data was obtained by analyzing traffic footage at four intersections on a day when the precipitation was greater than 5 mm/h. The collected data was classified into seven variables for statistical analysis. Finally, we used logistic regression analysis to develop a probability distribution model. RESULTS : Gap, traffic volume, and the number of conflicting lanes were factors affecting the gap acceptance behavior of unprotected left turns under rainy conditions. CONCLUSIONS : The probability of attempting unprotected left turns is higher for larger gaps. On the other hand, the probability of attempting unprotected left turns decreases with an increase in the traffic volume. Finally, an increase in the number of conflict lanes leads to a decrease in the probability of attempting unprotected left turns.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1273-1279
• /
• 1994

There are 3 cases that only permissive left-turn(PLT) vehicles use the possible lane for PLT. In these cases, left turn and through movements can not be included in the same lane group, hence saturation flow rate and left turn adjustment factor of PLT are obtained separately from through movement. In capacity analysis procedures at signalized intersection with PLT phasing, PLT capacity should be known to discriminate among 3 cases stated above. The capacity is directly used not only to get saturation flow rate and left turn adjustment factor, but as a threshold for the feasibility of PLT control. This study calculated through field data the critical gap and minimum headway of left turn which affect the PLT capacity. The capacity was obtained by using theoretical models, which consequently could be used to calculate the saturation flow rate and left turn adjustment factor.