• Annual Conference of KIPS
• /
• 2004.05a
• /
• pp.1409-1412
• /
• 2004

본 논문에서는 다중 공유 링크를 가진 스위치를 위한 세션 연결 설정 시 이를 어떤 링크에 할당할 것인지를 결정하는 경험적 세션할당 알고리즘을 제안한다. 제안 알고리즘은 새로운 세션이 소속된 서비스 클래스의 각 링크에 할당된 세션들의 예측된 지연들 중 가장 작은 예측 지연을 가진 링크에게 그 세션을 할당한다. 다른 세션할당 알고리즘에 비해 제안 알고리즘은 부클래스들의 예측지연 특성을 직접적으로 활용함으로써, 서비스 클래스들에게 사전에 예약된 대역폭을 제공하고, 동일한 서비스 클래스에 속한 세션들에게는 서로 다른 공유 링크를 통해 전송되어도 가능한 비슷한 지연을 제공한다는 것을 모의실험을 통해 확인했다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.41-49
• /
• 2005

This paper discusses the test procedure, instrumentation, verification methodology and the results of the ground vibration test(GVT) performed on the KF-16D aircraft to estimate experimentally dynamic characteristics of the aircraft. The modal tests for 7 external store configurations were conducted to estimate effects of external stores on the aircraft vibration modes. To emulate free-free boundary conditions the test aircraft was mounted on its landing gear structure with deflated tires during the GVT. The airframe modal tests were done by burst random excitations with 6 to 8 shakers and about 200 accelerometers. Frequency response functions(FRFs) were measured for each test, and the FRFs were reduced and analyzed to identify the dynamic parameters interested. The analyses were carried out in two steps. To extract modal parameters such as, frequencies and damping ratios, the poly-reference least square complex exponential method was used in the time domain. The mode shape coefficients were estimated with the least squares frequency domain method to identify the vibration modes.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.4 s.41
• /
• pp.339-350
• /
• 1999

In this study, blowholes, a kind of solid defects, were intentionally introduced in transverse butt-welded joints which are widely used for the connection of main members in steel structures to evaluate the fatigue characteristics of these joints with blowholes according to the difference of the size and shape of blowholes, and a series of tests were performed. Static test results proved that the static strength of these joints with blowholes was not affected by their size and shape. From the fatigue test results on these joints with blowholes, the size and shape of blowholes inside the weld metals were strongly affected in fatigue strength, and we suggested the relationship between fatigue strength and their size and shape quantitatively. Also, Using the relationship of fatigue crack growth rate and stress intensity factor range, the fatigue life of transverse butt-welded joints with blowholes can be estimated properly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.7-12
• /
• 2007

Previously study on structural design of the main wing of the twenty-seat class WIG (Wing in Ground Effect) craft. In the final design, three spars construction was selected for safety in the critical flight load, and the Carbon-Epoxy material was selected for lightness and structural stability. In this study, the forced vibration analysis was performed on the composite main wing structure of the twenty-seat class WIG craft with two-stroke pusher type reciprocating engine. The vibration analysis based on the finite element method was performed using a commercial FEM code, MSC/NASTRAN. Excitations for the frequency response analysis were assumed as the Y-mode (lateral mode), the Z-mode (vertical mode) and the $M_{xyz}$-mode (twisted mode) which are typical main vibration modes of engine. And excitations for the transient response analysis were assumed as the X-mode (longitudinal mode) with the oscillating propeller thrust which occurs in operation.

• Journal of The Korean Association of Information Education
• /
• v.22 no.4
• /
• pp.439-446
• /
• 2018

With the development of the realm of software and its getting the limelight, technical-specialized high schools are trying hard to improve their students' ability in terms of the realm of software in the latest. This study compared and analyzed targeting for students who are learning Java program how much the type of personality of learners influences on the improvement of the resilience. As a result, the learners having introverted personality didn't have a meaningful result on the improvement of the resilience which is necessary for the programming learning. Vice versa, the learners having extroverted personality had a meaningful result on the improvement of the resilience through that personality. Through this research, we can seek after the way for the improvement of learners' resilience which mutually benefits learners having extroverted personality or introverted personality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4197-4203
• /
• 2013

In order to investigate the heating performance of multi-heat pump applying an inverter compressor, the experiment on heat pump with 3 indoor units was performed under the heating standard and heating low-temperature conditions. The performance data of heat pump with 3 indoor units were measured by the multi-psychrometric calorimeter. The operation characteristics and the behavior of the refrigerant cycle of the heat pump with 3 indoor units were understood from the heating capacity, heating COP, and P-h diagram by indoor-unit combination. The present experimental results show that the operating load and performance of the multi-heat pump depends on the indoor-unit combination. The heating capacity and heating COP of the low temperature condition were smaller than those of the standard one. Also the refrigerant cycles on indoor-unit combination were analyzed by using P-h diagram.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.511-514
• /
• 2009

In this study, the combustion characteristics of hybrid rocket fuel with tapered grain port were studied. The regression rate was increased about 17.5% by using the convergence port shape fuel. On the other hand, in case of divergence port shape fuel, any notable difference of regression rate was not observed when compared with regression rate of the cylindrical port shape fuel. Also, in case of convergence port shape fuel, characteristic velocity efficiency was increased. From these results, one can notice that convergence port shape of hybrid rocket fuel can be effective configuration in terms of improvement of combustion efficiency and performance.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.93-101
• /
• 2006

The purpose of this research is to verify what are the characteristic points of the tourism resources in the historical sites and what kind of factors can roll as the tourism resources in two old cities, Kyungju and Kyoto, Those two old cities are the oldest cities in the world and they have several world cultural heritages that registered by UNESCO. In Old historic cultural sites has its own tourism resources factors and characters such as Uniqueness, Authenticity, Historical character, Regional character, Art factor, Religious factor,

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.1-8
• /
• 2007

The DC characteristics of GaAs Gunn diode are investigated as a preliminary study on the planar grade gap injector GaAs Gunn diode which is the transferred electron device with high output power and dc-rf conversion efficiency. The Gunn devices we fabricated were confirmed to have the DC characteristics of negative differential resistance(NDR). We discussed the nature of the NDR effect, including the electron intervalley transfer; the NDR effect was examined for six different cathode radii.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.131-131
• /
• 1999

비정질 카본 박막은 다이아몬드와 유사한 높은 경도, 내마모성, 윤활성, 전기절연성, 화학적 안정성, 그리고 광학적 특성을 가진 재료로서 플라즈마 CVD를 이용한 합성방법으로 제조된 박막이 주로 연구되고 있다. 본 연구에서는 마그네트론 스퍼터링을 이용하여 다양한 조건의 카본 박막을 제조하였다. 카본 박막의 제조는 이온빔이 장착된 고진공 증착 장치를 이용하였고 시편의 청정시 사용된 이온빔의 조건은 빔 전압이 500V, 빔 전류는 0.1mA/cm2로 기판 청정을 거친 후 DC 마그네트론 스퍼터링을 이용하여 흑연을 증발시켜 박막을 제조하였다. 기판과 타겟의 거리는 13cm로 고정시킨 후 타겟 전류는 1A로 유지하면서 30분간 증착하였다. 기판은 Si-wafer와 glass를 주로 사용하였으며 기판 인가전압, 아세틸렌 유량, 기판 온도등을 변화시켜가면서 각각 카본 박막을 제조하였다. 비정질 카본박막의 막은 평균 두께는 0.4~1.2$\mu\textrm{m}$이며 SEM을 이용하여 단면의 성장구조를 관찰하였다. 라만 분광분석과 FTIR 분광분석을 통하여 비정질 카본 박막의 결합특성을 조사하였고 scratch tester를 이용하여 박막의 밀찰력을 관찰하였다. 제조된 박막의 두께는 아세틸렌 가스 이용시 1$\mu\textrm{m}$ 이상의 박막의 제조가 가능하였으며 카본 박막의 라만 분광특성은 고체 탄소 물질의 S와 G-peak으로 구성되어 있으며 기판 인가전압, 아세틸렌 가스 유량 변화에 따른 peak의 위치 이동 및 FWHM의 변화를 관찰하였다. RFIR 결과는 아세틸렌 가스의 유량이 증가에 따라 C-H 결합 분포가 증가며 기판 인가 전압이 증가할수록 C-H 결합분포가 감소하는 경향이 나타냈다. 이는 이온 충돌 효과에 따라 결합력이 약한 C-H 결합이 우선적으로 파괴되는 현상으로 생각되어 진다. Scartch tester 측정 결과 박막의 밀착력은 실험조건에 따른 경샹성은 보이고 있지 않으나 10N 정도이며 60N 이상의 강한 밀착력을 가진 박막도 제조되었다.