• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.92-96
• /
• 2004

In this paper, polishing method using bonded magnetic abrasive particle has been applied to the micro mold polishing. Through process control using the Run-to-Run control, it tried to form the surface roughness In order to grasp the influence of the surface roughness which is reached by selection of control factor and the factor, a design of experiment was been processed. The study is processed with a purpose of to embody and to maintain the surface roughness of nano scale by the basis of an influence between a control factor and the factors which has been selected in this way. As a result, the result of the process control converged at a target value of surface roughness Ra 10nm and Rmax 50nm

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.962-967
• /
• 2014

In this paper, through a digital potentiometer and exponentially weighted moving average filter, pulse and PPG waveform measurable device was fabricated in radial artery. If this device is not proper about signal size in analog part, MCU can judge easily by adjusted amplification through digital potentiometer, using exponentially weighted moving average filter is able to filter out more clear value of ADC. I presumed pulse rate as value of measuring time between point of maximum contraction from sensing signal in radial artery of wrist. Therefore, this means can measure stable pulse rate and PPG waveform, finger as well as radial artery, whether signal size of each person is different finger as well as radial artery.

• The Korean Journal of Applied Statistics
• /
• v.31 no.2
• /
• pp.205-216
• /
• 2018

This paper is concerned with volatility computations for high frequency time series. A threshold-asymmetric realized volatility (T-RV) is suggested to capture a leverage effect. The T-RV is compared with various conventional volatility computations including standard realized volatility, GARCH-type volatilities, historical volatility and exponentially weighted moving average volatility. High frequency KOSPI data are analyzed for illustration.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1822-1829
• /
• 2006

본 연구에서는 계산된 유량과 실측 유량을 비교하여 Clark 단위도 방법의 매개변수를 추정하고자 하였다. 오산천과 진위천 상류유역에 대하여 Arcview와 WMS로 지형자료에 대한 전 처리를 한후, HEC-HMS 프로그램을 이용하여 유출량을 산정하였다. 2001년부터 2005년까지 4개의 사상에 대하여 강우량, 기흥저수지와 이동저수지의 실제 방류량을 이용하여 유출량을 산정하였으며, Clark 모형의 매개변수를 Russel 공식, Sabol 공식 및 HEC-HMS 프로그램에 내장된 Nelder-Mead 최적화 방법을 이용하여 매개변수를 각각 산정하여 회화 지점의 실측 유출량과 비교.평가하였다. 빈도가 큰 유출사상의 경우에는 Sabol 식을 적용한 결과가 Russel 식을 적용한 모의결과보다 첨두유량의 재현성이 우수하게 나타났으며, 유출량이 작은 경우에는 Russel 식을 적용한 모의결과가 우수하였다. 첨두가 중제곱평균제곱근오차, 잔차자승의 합, 절대잔차의 합 등 3가지의 서로다른 목적함수를 적용하여 매개변수를 자동 보정하였을 때, 목적함수에 따른 첨두유량의 오차는 거의 동일하였으며, 첨두시간에 대한 오차는 첨두가중제곱평균제곱근오차를 적용했을 때 가장 작은 것으로 분석되었다. 그리고 Clark 유역 추적모형의 자동보정을 통하여 추정한 매개변수인 도달시간과 저류상수는 강우사상에 따라서 변동하는 특성을 나타내기 때문에 최적의 도달시간 및 저류상수는 홍수사상별로 추정되어야 하며 이 결과는 홍수량 산정을 위한 매개변수 추정과정의 비유일성 및 복잡성을 암시하고 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.93-100
• /
• 2021

Since the IB (Immersed Boundary) method, which can perform coupling analysis with objects and fluids having an impermeable boundary of arbitrary shape on a fixed grid system, has been developed, the IB method in various CFD models is increasing. The representative IB methods are the directing-forcing method and the ghost cell method. The directing-forcing type method numerically satisfies the boundary condition from the fluid force calculated at the boundary surface of the structure, and the ghost-cell type method is a computational method that satisfies the boundary condition through interpolation by placing a virtual cell inside the obstacle. These IB methods have a disadvantage in that the computational algorithm is complex. In this study, the simplified immersed boundary (SIB) method enables the analysis of temporary structures on a fixed grid system and is easy to expand to three proposed dimensions. The SIB method proposed in this study is based on a one-field model for immiscible two-phase fluid that assumes that the density function of each phase moves with the center of local mass. In addition, the volume-weighted average method using the density function of the solid was applied to handle moving solid structures, and the CIP method was applied to the advection calculation to prevent numerical diffusion. To examine the analysis performance of the proposed SIB method, a numerical simulation was performed on an object falling to the free water surface. The numerical analysis result reproduced the object falling to the free water surface well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.1-9
• /
• 2011

In this paper, we propose an efficient method to create clusters of geographically distributed base stations which cooperatively transmit signals in cellular mobile communication systems. The proposed method utilizes a sequential selection approach to choose candidate base stations which can provide maximum weighted sum-rate gain when they participate in the cooperative transmission with the existing cluster. In particular, the proposed method limits the maximum number of base stations in a cluster by considering the system operational and implementation complexities. Moreover, the combinations of clusters dynamically change along with variations of channel environments. Through computer simulations, performance of the proposed method is verified by comparing with the non-cooperative transmission method and the static clustering method. Numerical result shows that the proposed sequential selection based clustering method is especially advantageous for the performance improvement of lower percentile users in terms of average throughput, and thus the proposed method can effectively improve the fairness among users.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.565-573
• /
• 2008

This paper proposes noise reduction methods to improve the channel estimation performance in Equalization On-Channel Repeater (E-OCR) for Terrestrial-Digital Multimedia Broadcasting (T-DMB) system. In the E-OCR for T-DMB system, the channel estimation is performed by the pilot signal extraction and the channel coefficient estimation. Since the performance of the channel estimation highly depends on the estimated channel coefficients whose accuracy is associated with the received signal-to-noise ratio (SNR), it is important to reduce noise existing at the estimated channel coefficients. To reduce such noise components, various noise reduction methods of the estimated channel coefficients based on the M -point weighted moving average are proposed. Computer simulations show that the proposed methods improve the estimation performance by more than 2 to 3 dB in terms of the symbol error rate after equalization.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.135-142
• /
• 2010

The convenient techniques for predicting the bus arrival time have used the data obtained from the buses belong to the same company only. Consequently, the conventional techniques have often failed to predict the bus arrival time at the downstream bus stops due to the lack of the data during congestion time period. The primary objective of this study is to overcome the weakness of the conventional techniques. The estimation model developed based on the data obtained from Bus Information System(BIS) and Bus management System(BMS). The proposed model predicts the bus arrival time at bus stops by using the data of all buses travelling same roadway section during the same time period. In the tests, the proposed model had a good accuracy of predicting the bus arrival time at the bus stops in terms of statistical measurements (e.g., root mean square error). Overall, the empirical results were very encouraging: the model maintains a prediction job during the morning and evening peak periods and delivers excellent results for the severely congested roadways that are of the most practical interest.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.10
• /
• pp.373-380
• /
• 2022

This paper presents a deep learning based group synchronization that supports networked immersive interactions between remote users. The goal of group synchronization is to enable all participants to synchronously interact with others for increasing user presence Most previous methods focus on NTP-based clock synchronization to enhance time accuracy. Moving average filters are used to control media playout time on the synchronization server. As an example, the exponentially weighted moving average(EWMA) would be able to track and estimate accurate playout time if the changes in input data are not significant. However it needs more time to be stable for any given change over time due to codec and system loads or fluctuations in network status. To tackle this problem, this work proposes the Deep Group Synchronization(DeepGroupSync), a group synchronization based on deep learning that models important features from the data. This model consists of two Gated Recurrent Unit(GRU) layers and one fully-connected layer, which predicts an optimal playout time by utilizing the sequential playout delays. The experiments are conducted with an existing method that uses the EWMA and the proposed method that uses the DeepGroupSync. The results show that the proposed method are more robust against unpredictable or rapid network condition changes than the existing method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1221-1225
• /
• 2006

문산천 하구와 임진강 장단반도 부근은 일반 하천과는 달리 특이한 하도특성을 지니는 구간이다. 문산천의 종단특성은 전형적인 상시 퇴적구간이다. 유사레짐에서도 실제 문산천 하구와 임진강 반구정 구간의 흐름특성 또한 감조구간으로서 밀물, 썰물에 민감하게 작용하여 거시적으로 유사이동이 정체성을 띠는 구간인 것이 확인되었다. 평면특성으로서는 임진강 반구정 구간에서 만곡하도 구간으로서 그 만곡 정도가 매우 크며(곡률 반경 709 m), 이에 따른 양안의 수위차가 실제 약 30 cm 이상 발생하는 것으로 평가되었다. 그리고 문산천 하구역의 하상경사가 1/5,400으로 임진강의 1/3,000보다 완만하다. 문산천 합류부 부근의 하상재료를 살펴 볼때도 임진강보다 문산천에서 더 작은 입경이 비교적 널리 분포하고 있다. 따라서, 홍수시 특히 조석이 창조기나 정체기에 임진강으로 직각 유입하는 형태를 취하고 있는 문산천 하구에서 문산천 홍수량이 유하하지 못하여 배수영향이 가중되고 임진강의 우안이 상대적으로 높은 홍수위가 역류하고 있다고 추정되었다. 이와 같은 현상들은 평균하상고의 변화에서도 나타나듯이 문산천 하구에서 외견상 하구막힘과 같은 사주 형태가 발달하는 양상에서도 찾을 수 있었다. 결국 문산천 하구에서 수위 및 하상변동량 저감을 위한 궁극적인 대책으로서 새로운 문산천 방수로 건설 및 현 문산천 하구에서의 배수기장 도입이 필요한 것으로 분석 되었다.