• Journal of Food Hygiene and Safety
• /
• v.33 no.2
• /
• pp.118-123
• /
• 2018

The objective of this study was to develop a sensitive method for the identification and determination of nitrovin in fishery products by using a solid-phase extraction (SPE), as performed with a liquid chromatography-tandem mass spectrometry (LC-MS/MS). The samples were extracted with a mixture of acetonitrile and water, and were then defatted with acetonitrile saturated hexane, after which further clean-up was accomplished with SPE on the hydrophilic-lipophilic balance (HLB) cartridges. The analytes were subsequently ionized in the positive mode of an electrospray ionization (ESI), and where thereby detected in a process of multiple reaction monitoring (MRM). The linearity (expressed as correlation coefficients) of the matrix calibration curves was > 0.985. The limit of the quantification for the nitrovin was measured at 0.001 mg/kg. The accuracy (expressed as average recovery) was noted between 72.1 and 122%. The precision (expressed as coefficient variation) was noted from 2.9 to 16.9%. According to the CODEX CAC/GL-71 guideline accuracy, precision, linearity, and limit of detection were determined in three matrices (which were flatfish, eel and shrimp). The proposed method was suitable for analyzing the associated nitrovin residues. This application and result can also be a factor to contribute to the non-detection drugs management in fishery products.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.471-471
• /
• 2018

국가 수자원 관리에 가장 기초가 되는 수문조사는 측정과 자료 분석을 위해 행해지는 모든 과정에서 자료의 정확성과 신뢰성이 담보되어야 한다. 현재 수문조사는 국토교통부를 비롯하여 환경부, 수자원공사 등 다양한 부처와 기관에서 수행하고 있으며, 수문조사 방법 및 기준표준화 연구(2009), 수문조사 관련 법정 행정규칙 마련, 수자원 조사법 제정, 수문자료 공인 및 저장, 배포, 활용, 기준고시 등을 통해 수문조사 발전 및 표준화를 위한 노력을 해오고 있다. 하지만 국가차원의 표준화(기준과 매뉴얼)가 아직 미진하여 기관별 생산 자료의 품질차이가 발생하고 있다. 국내의 현장여건은 식생, 공사, 모래하상 등으로 과거와 다르게 점차 다양화 되고 있으며, 국외와 차별화 된 국내 하천만의 특성으로 반영되고 있다. 또한 최근 ADCP와 같은 첨단장비 활용이 증대되는 추세인데 비해 첨단장비 관련 기준은 아직 미비한 부분이 많다. 국내 측정환경이 고려된 수문조사 표준화를 위해서는 USGS와 같은 선진국의 국제기준 검토와 함께 각 하천 환경에 맞는 유량측정 방법 및 기술을 개발하고, 다양한 현장 특성이 반영된 측정방법의 적용과, 자료 분석을 통한 기준제시가 필요하다. 첨단 장비 및 관련 기술을 활용한 수문조사 선진화를 위해서는 정확한 첨단장비 활용에 대한 표준이 필요하다. 즉 수문조사 전반에 대한 표준화와 이를 통한 공유와 활용이 이루어져야 한다. 한국수자원조사기술원(구 유량조사사업단)에서는 2007년부터 수문조사를 수행하면서 국내 하천유량조사 경험과 기술 노하우를 바탕으로 수문조사 분야별 측정방법, 장비, 레이팅, 자료 분석 등에 대한 수문조사매뉴얼과 가이드라인을 발간하여 실무에 적용, 활용하고 있다. 이러한 노력은 국내 수문조사 표준화를 정착, 발전시키고 국제 표준화에 기여할 수 있는 계기가 될 것으로 생각된다.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.1
• /
• pp.15-30
• /
• 2007

The purpose of this study is to explore essential factors of influencing user's usage intentions on telematics services and to find relationships among factors. This study derives several variables and hypotheses through literature reviews on the extended research model based on Davis's Technology Acceptance Model. With the objective of statistical verification, derived variables were sorted into meaningful categories through various statistical packages. These were included multiple regression analysis to improve the reliability of survey data. The demand analysis was conducted by targeting on users who have previously experienced telematics services. Indicated analyzed results which 'suitability', 'localization', and 'instant connectivity' variables were positively related to the user's usage intentions, especially accuracy of information variable. The factors of influencing the usage intention on telematics services can be useful empirical data in order to analyze the market trends and to suggest industrial or political guideline of telematics services.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.123-130
• /
• 2007

The aim of this study was to propose a fusion and registration method with heterogeneous small animal acquisition system in small animal in-vivo study. After an intravenous injection of $^{18}F$-FDG through tail vain and 60 min delay for uptake, mouse was placed on an acryl plate with fiducial markers that were made for fusion between small animal PET (microPET R4, Concorde Microsystems, Knoxville TN) and Discovery LS CT images. The acquired emission list-mode data was sorted to temporally framed sinograms and reconstructed using FORE rebining and 2D-OSEM algorithms without correction of attenuation and scatter. After PET imaging, CT images were acquired by mean of a clinical PET/CT with high-resolution mode. The microPET and CT images were fusion and co-registered using the fiducial markers and segmented lung region in both data sets to perform a point-based rigid co-registration. This method improves the quantitative accuracy and interpretation of the tracer.

• The Journal of the Korea Contents Association
• /
• v.9 no.9
• /
• pp.411-422
• /
• 2009

The study seeks to explore essential factors that influence tourists' continual usage intentions to mobile tour information services. The variables such as characteristics of tour information service, accuracy, interactivity, context, ubiquitous connectivity, perceived usefulness, perceived ease of use were adopted from previous research and the hypotheses were developed on the basis of Davis's Technology Acceptance Mode(TAM). The survey was conducted by users who have previously experienced mobile tourism information service. Structural equation modeling was used to Investigate the relationships between the factors. The results showed that interactivity, context, perceived usefulness and perceived ease of use were found to have a positive impact on satisfaction. In particular, interactivity and context were found to be the most significant factors that influence reuse intentions. It suggests that increasing context and interactivity to make tourist trust about accuracy, ubiquitous connectivity is better than increasing perceived usefulness and perceived easiness. The identified factors that influence continual usage intentions on mobile services can be useful for analyzing the market trends and suggesting industrial guidelines of mobile services.

• Journal of Food Hygiene and Safety
• /
• v.37 no.5
• /
• pp.297-305
• /
• 2022

Antioxidants are food additives that extend the shelf life of food products by preventing lipid rancidity caused by active oxygen. They can either be naturally-derived or manufactured synthetically via chemical synthesis. In this study, method validation of five synthetic antioxidants, namely butylated hydroxyanisole, butylated hydroxytoluene, tertiary butylhydroquinone, propyl gallate, and disodium ethylenediaminetetraacetic acid, was performed using a high performance liquid chromatography-ultraviolet visible detector, and the method applicability was evaluated by analyzing foods containing antioxidants. The coefficient of determination (R²) average was 0.9997, while the limit of detection and limit of quantification were 0.02-0.53 and 0.07-1.61 mg/kg, respectively. The intra and inter-day accuracies and precisions were 83.2±0.7%-98.7±2.1% and 0.1%-5.7% RSD, respectively. Inter-laboratory validation for accuracy and precision was conducted using the Food Analysis Performance Assessment Scheme quality control material. The results satisfied the guidelines presented by the AOAC International. In addition, the expanded uncertainty was less than 16%, as recommended by CODEX. Consequently, to enhance public health safety, the results of this study can be used as basis data for evaluating the intake of synthetic antioxidants and assessing their risks in Korea.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.141-142
• /
• 2008

국내 지중송전선로는 주로 XLPE케이블과 OF케이블로 구성된다. 1971년 154kV급 OF 케이블이 최초로 한전에 의해 상용운전에 들어간 후 XLPE 케이블 지중선로가 1983년부터 병용운전 되고 있으며 OF케이블의 경우 절연유의 사용으로 인한 화재의 위험과 환경오염 문제 등으로 인하여 점진적으로 XLPE케이블로 대체되는 추세에 있다. 하지만 내전압 시험, 절연저항이나 누설전류 측정, $tan{\delta}$ 측정 등으로 진단이 가능했던 OF케이블과는 달리 XLPE케이블의 경우 종래의 시험을 통한 진단은 한계가 있고 부분방전을 통한 진단이 가장 효율적인 진단방법으로 제시되어 국내외 XLPE케이블의 진단을 위해 운영되고 있으며 보다 정확한 PD측정을 위한 연구가 계속 진행되고 있다. 지난 10년여간의 국내외 연구결과 XLPE케이블에 대한 PD 측정기술의 정확성은 상당히 향상되었고 그 결과물로서 수많은 폭정 장비와 기법이 개발되어 오늘날 널리 보급되고 있다. 하지만 여전히 측정된 Data에 대한 해석은 일부 전문가들에게 조차 복잡하고 어려운 일로 남아 있다. 자칫 그릇된 해석은 향후 큰 사고로 이어질 수 있으므로 선로 운영자의 입장에서는 측정결과의 신뢰성에 민감할 수밖에 없다.

• The KIPS Transactions:PartA
• /
• v.12A no.7 s.97
• /
• pp.589-596
• /
• 2005

Source code quality is very Important that software embedded into product is difficult to change. In order to improve source code quality, it should be considered the quality of analysis and design models as well as the quality of source code. In this paper, we suggest 'Practice Pattern' as one of practical techniques to improve embedded software source code quality. Practice pattern is a procedural pattern to guide modeling and coding activities in software development phases. We believe that applying our pattern provides the improvement of optimum performance, modularization, and portability for embedded software source code.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.537-538
• /
• 2015

최근 자전거의 활용범위가 출퇴근뿐만 아니라, 친환경 헬스케어 부각으로 자전거 타는 것에 많이 이용되고 있는 실정이다. 근래 몇 년 사이에 정부에서도 자전거 전용도로를 도시외각뿐만 아니라 자전거로 출퇴근 이용자들을 위해 안전하게 운행할 수 있도록 자전거 전용도로를 전국에 확대설치 하여 자전거 보급을 확대 하고 있다. 하지만 현재 국내에 많이 보급되어 있는 자전거는 대부분이 외국에서 반제품이 수입되어 국내에서 완제품으로 조림하여 판매되는 제품들이 주를 이루고 있으며, 자전거 부품 중에도 최근 외국에서 개발이 진행되고 있는 전자변속기 또한 외국의 기술들이 도입되어 제품들이 출시되고 있는 실정이다. 이에 외국의 기술적 우위로 인하여 한국의 자전거 산업발전에 어려움이 많은 것이 현실이다. 본 연구에서는 리니어모터를 이용하여 디지털 전동 변속기를 개발 하여, 변속의 신속성, 정확성을 확보하면서, 동시에 외국의 기술적 장벽을 넘고자 한다. 현행 자전거 뒤 변속기의 정확한 변위위치 확보하기 위하여 자전거 핸들에 장착되어 있는 변속레버를 디지털화 하여, 변속을 제어하게 되면 뒤쪽에 설치되어 있는 리니어모터를 위치 제어함으로써 가이드 샤프트 피치에 의하여 변속위치가 정밀하게 제어 할 수 있는 전동 변속기 제어시스템을 제안하고자 한다.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.751-758
• /
• 2008

The purpose of this study is to implement 3D Face Model, which resembles a user, using 3D Graphic techniques. The implemented 3D Face model is used to further study and implement 3D Facial Aesthetic Surgery System, that can be used to increase the satisfaction rate of patient by comparing before and after facial aesthetic surgery. For designing and implementing 3D Facial Aesthetic Surgery System, 3D Modeling, Texture Mapping for skin, Database system for facial data are studied and implemented independently. The Detailed Adjustment System is, also, implemented for reflecting the minute description of face. The implemented 3D Facial Aesthetic Surgery System for this paper shows more accuacy, convenience, and satisfaction in compare with the existing system.