• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2014

This study was performed with electrolysis treatment method for improving anaerobic digestion gas production efficiency in a sewage sludge, thereby confirmed in anaerobic digestion production and denitrification effect. As a result, solubilization was increased by increasing treatment time of electrolysis and current density, also showed to be 9.02% with 10 mA/cm2 of current density in 4 mm electrode distance. Based on the results of BMP test used the above experiment, methane production was 0.49 L CH4/g VS, and increased by 88.4% compared with control groups. As for the results of denitrification using the sewage sludge treated with the same conditions, denitrification rate appeared $19.2mg\;NO_3{^{-}}N/g\;MLVSS{\cdot}hr$, and through the sewage sludge treated with electrolysis, it can be applied to anaerobic digestion and denitrification process by increasing biodegradation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.547-547
• /
• 2015

본 연구에서는 달천구간 (괴산댐~송동보)에서 어류 군집 (Fish Community)을 고려한 생태학적 최적유량 (Ecological Optimum Discharge)을 산정하였다. 이를 위해 유량증진방법론(IFIM: Instream Flow Incremental Methodology)을 기반으로 한 2차원 모형인 River-2D를 적용하여 수리해석 및 대상어종 (Target Fishes)에 대한 가중가용면적 (WUA: Weighted Usable Area)을 산정하였다. 모형 검증을 위해 김원 등 (2007)에 의해 수행된 과업구간 내 수위 및 유량 모니터링 자료를 활용하였으며, 하류경계조건은 김지성 등 (2007)에 의한 수위-유량 관계곡선식을 활용하였다. 또한 평저류량 조건에서의 조도높이 (Roughness Height) 산정을 위해 유량 및 하상재료의 영향을 고려할 수 있는 멱함수 및 반대수함수 형태의 조도계수 공식을 적용하였다. 모형검증 결과 River-2D에 의해 계산된 수위값이 모니터링값과 비교적 잘 일치함을 알 수 있었다. 대상유역에 대한 어류 모니터링 (에코리버21사업단, 2007~2010) 결과를 바탕으로, 과업지역내 우점종 (피라미), 아우점종 (쉬리 등 3개 어종), 멸종위기어종 (묵납자루)을 대상어종으로 선정하였으며, 대상어종에 대한 서식도적합도지수 (HSI, Habitat Suitability Index) 산정을 위해 IFASG (Instream Flow and Aquatic Systems Group) 방법 및 WDWF (Washington Department of Fish and Wildlife) 방법을 적용하였다. 수심, 유속, 하상재료 및 하상형상에 대한 서식도적합도지수가 5가지 대상어종에 대해 각각 산정되었으며, 복합적합도지수 (CSI : Combined Suitability Index)를 고려한 과업대상 위치별 어류의 발생확률이 모의되었다. 어류 군집에 대한 가중가용면적 (WUA)이 최대로 되는 생태학적 최적유량 산정 결과, Type I~III의 경우 모두 $10m^3/s$ 이하의 유량조건에 대해서 WUA가 최대값을 갖는 것을 확인할 수 있었으며, 납자루속의 어류 (Type III)의 WUA가 000 및 000속 (Type II)의 어류에 비해서 작은 유량에서 더 큰 값을 갖으며, $10m^3/$s 초과 유량에 대해서는 반대의 경향이 나타나는 것을 확인할 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.94-100
• /
• 2008

Available transfer capability(ATC) quantifies the viable increase in real power transfer from one point to another in a power system. ATC calculation has predominantly focussed on steady-state viability. But ATC assessment with transient stability constraints has a dominant part in overall ATC calculation. ATC assessment requires a reputation of (n-1) security assessment with constraints of thermal limits, voltage stability and dynamic stability. An estimation of determinant contingency screening method is used for computing eigenvalue of Jacobian matrix. This paper proposed a methods to ATC calculation using energy function. Constraints is used thermal limits, voltage stability and transient stability.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.2
• /
• pp.216-220
• /
• 2008

Sensor nodes in wireless network have several limitations such as lack of energy resource and network bandwidth. There are many researches to extend lifetime of sensor network and enhance availability. However, most of the previous researches didn't consider the mobile sink node. Those researches aren't suitable in the environment having mobile sinks. In this paper. we propose a scheme that reduces communication overheads and energy consumptions and improves reliability in routing path setup. Proposed scheme has excellent scalability without degrading performance in environment where many sink nodes exist and/or the network size is huge. Proposed scheme saves the energy consumption up to 70% in comparison with the previous grid-based and cluster-based protocol. As a result, proposed scheme increases the lifetime of sensor network and enhances availability of wireless sensor network.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.654-662
• /
• 2005

Mobile portable devices for wireless network solely depend on a limited battery power. Therefore, we need to design for wireless communication protocols with an energy efficiency. TCP-Westwood is one of the most important approaches on TCP performance improvement in wireless environments that estimates the available bandwidth by using the sampling mechanism. The advantage is that data can be transmitted efficiently using the estimation of available bandwidth. However, when the sender with TCP-Westwood is in a wireless environment, it does not consider of the sampling mechanism operation. In this thesis, a new energy saving transport protocol, called E2TP(Energy Efficient Transport Protocol), is proposed to solve problems which occur when the sender with TCP-Westwood is in a wireless environment. Also, when there are packet loss while doing frequent link error in a wireless environment, E2TP provides the instantaneous segment size adjustment for a more efficient data retransmission. The simulation result proves that the proposed E2TP has better performance in energy efficiency and throughput than both TCP and TCP-Westwood.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.577-580
• /
• 2014

In this paper an auto-switching dual-input energy harvesting circuit is proposed. Since the maximum power points of a thermoelectric generator(TEG) output and a vibration device(PEG) output is 1/2 of their open-circuit voltage, an identical MPPT controller can be used for both energy sources. The proposed circuit monitors the outputs of the TEG and PEG, and chooses the energy source generating a higher output using an auto-switching controller, and then harvests the maximum power from the selected device using a MPPT controller. The harvested energy is boosted through a charge pump and stored in a storage capacitor. The stored energy is provided to a load through a PMU(Power Management Unit). The proposed circuit is designed in a $0.35{\mu}m$ CMOS process and its functionality has been verified through extensive simulations. The designed chip occupies $1.4mm{\times}1.2mm$ including pads.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.819-828
• /
• 2022

Sensitivity of aircraft sizing depending on battery performance was studied for a generic quad tilt rotor type electric vertical takeoff and landing vehicle. The mission requirements proposed by Uber Elevate and NASA were used for initial sizing, and the calculated gross weight is ranged between 5,000lb and 11,000lb for battery specific energy range of 200-400Wh/kg in pack level and continuous discharge rate range of 4-5C. For the assumed gross weight of 7,000lb, the required battery performance was calculated with two different criteria: available power and energy, and the effects of battery specific energy and discharge rate are analyzed. The maximum discharge rate is also recommended considering failure cases such as one battery pack inoperative and one prop rotor inoperative.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1113-1122
• /
• 2009

In order to find the way to solve the problem of sewage sludge discharge into the ocean, the sludge solubilization by ultrasonic and the improvement methods of wastewater treatment process were studied. In the membrane bioreactor the sludge retention time was stepwise increased from 5.1 day to 442 days where the biomass average concentration has been increased from $c_B$=3.4 $gTSSL^{-1}$ to $c_B$=14.5 $gTSSL^{-1}$ respectively. At the same time, the biomass yield coefficients were reduced from 0.5-0.7 at SRT=5.1 day to 0.005-0.007 at SRT=442 days which means the reduction of sludge production. Oxygen mass transfer coefficients and ${\alpha}$-factor were investigated with changing stirrer speed to find the relation between the high biomass concentration and aeration efficiency in the propeller loop reactor. As a result of sludge solubilization, the solubilization of sludge by ultrasound was increased with increasing energy input and it led to improved anaerobic digestion rate with more biogas production than that of nonsolubilized sewage sludge.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.165-173
• /
• 2008

Hybrid ad hoc networks are integrated networks referred to Home Networks, Telematics and Sensor networks can offer various services. Specially, in ad hoc network where each node is responsible for forwarding neighbor nodes' data packets, it should net only reduce the overall energy consumption but also balance individual battery power. Unbalanced energy usage will result in earlier node failure in overloaded nodes. it leads to network partitioning and reduces network lifetime. Therefore, this paper studied the routing protocol considering efficiency of energy. The suggested algorithm can predict the status of energy in each node using the energy prediction model. This can reduce the overload of establishing route path and balance individual battery power. The suggested algorithm can reduce power consumption as well as increase network lifetime.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.121-123
• /
• 2003

현재 사용되는 PDA, 핸드폰 등의 이동기기는 보다 좋은 성능과 향상된 기능에 대한 시장의 지속적인 요구로 고성능을 요구하는 응용 프로그램이 점차 추가되고 있다. 이에 고성능 프로세서의 탑재가 일반화 되고 있으며, 그에 따른 전력 소비 또한 증가하고 있다. 시스템 전력 사용량의 증가 문제를 해결하고자 DVS기법, DPM기법 둥이 제시되었으나 모바일 기기에 저전력 프로세서의 탑재가 일반화 되면서 전체 에너지 소비측면에서 디바이스의 비중이 상대적으로 증대되어 기존 스케줄링 기법은 하나의 시스템 요소만을 위한 최적화 방법을 제시할 뿐 전체 시스템의 에너지 소비를 최적화시키지는 못하게 되었다. 이에 본 논문에서는 이동기기에서 프로세서의 속도를 결정하는 과정과 스케줄러가 태스크의 우선순위를 결정하는 과정에 있어 단위 시간당 디바이스의 에너지 소비가 프로세서의 단위 시간당 에너지 소비보다 큰 현실을 반영하여, 태스크의 실행 중 필요한 디바이스의 전력 소모량을 기준으로 스케줄러가 프로세서 최적화 정책과 디바이스 최적화 정책 중 올바른 스케줄링 정책을 선택하여 프로세서의 속도를 결정하고 실행순서를 조절함으로써 시스템의 가용시간을 향상시키는 기법을 제안한다.