• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.43-46
• /
• 2006

Storage air heater(SAH) is a general purpose facility that is used to simulate the high altitude condition of supersonic ground test facility, thurst compensation test of rocket engine nozzle and gas turbine engine combustor test. SAH in KARI is built to simulate the total temperature of the supersonic ground test facility which has a wide flight envelope from altitude 0km, Mach 2 to altitude 25km, Mach 5 and operates up to 1300K, 3.5MPa. In this paper, we introduces the SAH in JAXA which is model of SAH in KARI and summarizes the design process and manufacture of ours.

• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.325-329
• /
• 1995

Changes in the physical properties of soybean curd upon the processing conditions such as coagulant concentration, heating temperature and molding pressure were determined by using a failure stress and residual delay time of ultrasonic wave(5 MHz). Maximum failure stress of Tofu was obtained at the 0.3% $CaCl_2$ coagulant concentration, $95^{\circ}C$ heating temperature and greater molding pressure, respectively, whereas the delay time is inverse proportion to the failure stress value. The results of the multiple regression analysis with factorial design showed that the model equation consisted with delay time and processing conditions gave the good prediction of the Tofu failure stress.

• Korean journal of food and cookery science
• /
• v.12 no.1
• /
• pp.40-45
• /
• 1996

This study was conducted in order to determine the effect of various cooking methods (boiling, pressure cooking, steaming and microwave heating) on mineral content, color and sensory quality of radish, potato and carrot. It was shown that microwave heating was desirable method in cooking radish on both the acceptability and the retention of mineral content. On the other hand, steaming and pressure cooking were found to be desirable methods for cooking potato. There were not so many differences in both the retention of mineral content and the acceptability of carrot by various cooking methods. The pressure cooking, which was not a proper method for leaf vegetables, could be applied to root vegetables without losing so many mineral contents.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.810-820
• /
• 1985

배기 decoupling chamber룰 갖고 있는 맥동 연소 급수가열기에 대한 수학적인 모델링과 관련된 컴퓨터 시뮬레이션을 하였고, 이 때 계에 대한 맥동 현상과 관련된 열적 및 동적 특성을 고려 였다. 시뮬레이션결과 시동기간에 대한 계의 각 부분에서 일어나는 열전달, 압력 및 온도를 구 였고 또한 해석의 제한성과 개선의 필요성을 논의하였다. 이 연구에서 얻어진 결과는 도관에서 맥동에 의한 대류열전달을 예측하기 위한 모델을 세우는데 활용될 수 있다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.165-170
• /
• 1999

기계적 증기재압축(Mechanical Vapor Recompression) 시스템은 증기를 압축하여 압력을 올리면 온도가 상승하는 원리를 이용한 것으로서 시스템의 최종 증발관에서 발생한 저온의 증발증기를 전량 증기압축기로 압축ㆍ승온하여 자신의 최초 증발관의 가열 열원으로 재사용 하는 방식이다. 따라서 이 사이클에 필요한 보충열원은 가열측과 증발측과의 온도상승분 만큼만 증기의 포화온도를 올리면 되므로 에너지절약 효과가 매우 크다.(중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.817-818
• /
• 2012

본 연구에서는 치과에서 마취 시 환자들의 고통을 최소화 하기위하여 무통마취를 위한 치과용 약물주입기를 구현하였다. 약물의 주입 시 통증을 최소화하기 위해서 온도를 $36{\pm}2^{\circ}C$ 범위로 제어하여 체온과 유사한 온도로 유지하였다. 이를 위하여 필름히터 방식을 이용한 치과범용국소약물(36mg, 2% 리도카인) 앰플 가열부를 설계하였다. 또한 약물이 주입되는 양을 능동적으로 제어하기 위하여 약물주입 환부의 환자별 흡수 속도 차이에 차등 주입을 위한 압력 측정 시스템을 구현하였다. 필름 형태의 압력 센서를 통하여 전달 압력을 측정하였으며 측정된 압력을 바탕으로 능동적으로 모터의 동작을 제어함으로써 약물주입시 환자의 고통을 최소화 할 수 있도록 구현하고자 하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.436-442
• /
• 2013

Friction welding is a very useful joining process to weld metals which have axially symmetric cross section. In this paper, the feasibility of industry application was determined by analyzing the mechanical properties of weld region for a specimen of tube-to-tube shape for excavator hose nipple with friction welding, and optimized welding variables were suggested. In order to accomplish this object, friction heating pressure and friction heating time were selected as the major process variables and the experiment was performed in three levels of each parameter. An acoustic emission(AE) technique was applied to evaluate the optimal friction welding conditions nondestructively. AE parameters of accumulative count and event were analyzed in terms of generating trend of AE signals across the full range of friction weld. The typical waveform and frequency spectrum of AE signals which is generated by friction weld were discussed. From this study the optimal welding variables could be suggested as rotating speed of 1300 rpm, friction heating pressure of 15 MPa, and friction heating time of 10 sec. AE event was a useful parameter to estimate the tensile strength of tube-to tube specimen with friction weld.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.1
• /
• pp.5-12
• /
• 2014

In this study, we developed the electric heating equipment and applied for soft ground improvement. The developed heat pipe is 4 m-length and consumes 1 kW/m, which is consisted of Ni-Cr wire. It was installed in 3.5~4.5 m below ground surface and heated for 96 hours (48 hours, 2 times). The temperature variation and vapor pressure caused by electric heating was measured by the thermometer and pressure gauge which were installed in the ground (5.0 m), and the tip resistances were measured by static electronic piezo-cone penetration test (CPT). As the results of experiments, 2-order polynomial curve was shown to adjust the variation of tip resistance and the temperature distribution with the horizontal distance from electric heater, whose R2 value is close to 1. In addition, in-situ pore-water pressure and water content was decreased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2628-2634
• /
• 2014

Vehicle washer heater system is more widely adopted to defrost a window or to clear the windshield glass in winter season. The washer heater system should be designed to heat up washer fluid rapidly to the target temperature for only a short time. A numerical analysis has been carried out to analyze the heat transfer characteristics with materials of inside parts in vehicle washer heater system with filler and flow path. ANSYS - FLUENT software is employed for the analysis. The axial symmetry model is three-dimensional and unsteady. It applies to the coupled method which is one of pressure based. Through this result, it was obtained to find the optimal material condition for the filler and flow path in washer system. For material of filler, the air with lower density was heated more rapidly rather than silicon carbide(SiC). For material of flow path, copper with the heat transfer coefficient of approximately four times greater than the nickel gives us higher efficiency. That is the reason why the heating time of methanol was reduced to make uniform temperature in washer heater system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.140.2-140.2
• /
• 2015

낮은 압력의 평판형 유도 결합 플라즈마 (Inductively Coupled Plasma, ICP)에서 챔버 높이를 바꾸면서 전자 에너지 확률 함수 (Electron Energy Probability Function, EEPF)를 측정하였다. 측정된 전자 에너지 확률 함수에서 기울기가 평평한 부분이 관찰됐고, 이러한 전자 에너지 분포함수의 평평한 부분은 챔버 높이를 증가함에 따라 높은 전자 에너지로 옮겨졌다. 이러한 현상을 분석하기 위해서 2차원 비충돌 가열 메커니즘이 포함된 유도 결합 플라즈마 모델로부터 전자 에너지 확산 계수와 이론적인 전자 에너지 확률 함수를 구하여 실험 결과와 비교하였다. 이를 통하여, 측정된 전자 에너지 확률 함수의 평평한 부분은 전자 튕김 공진 (electron bounce resonance)에 의한 것임을 알 수 있었다.