Proceedings of the Korea Institute of Fire Science and Engineering Conference
/
2011.04a
/
pp.176-179
/
2011
국내에서는 방화구획을 설정하여 화재 확산 방지 및 재실자의 대피 시간을 확보하고 있다. 방화구획에 설치되는 방화문은 방화문의 내화시험방법(KS F 2268-1)에 따라 시험을 거쳐 성적서를 발급 받은 제품에 대해 설치하도록 의무화 하고 있다. 그러나 본 시험방법은 시험체 제작, 설치 및 의뢰시험비용 등 상당한 비용이 소요될 뿐 아니라 제작, 설치, 시험에 소요되는 시간 또한 길다. 축소실험장치는 목재방화문 개발 중 재료의 내화성능을 평가할 장치로 개발되었으며, 표준시간-가열 온도곡선을 상회하는 가열실험을 통해 재료의 내화성능 결과를 얻을 수 있다. 본 실험에서는 난연 또는 불연성능이 뛰어난 재료를 대상으로 실험하였으며, 그 결과 난연목재는 5분, 마그네슘보드와 내화 직물원단은 60분의 내화성능을 갖춘 것으로 확인되었다. 이 결과를 토대로 방화문의 내화시험방법과 상관성을 도출하여 목재방화문 개발의 지표로 활용 가능하게 되었다.
Kim, Dae-Ho;Choi, Jin-Ju;Vijayan, M.T.;Jung, Sun-Shin;Park, Sung-Su;Lee, Kun-Dae;Kim, Bo-Hyun
한국신재생에너지학회:학술대회논문집
/
2009.11a
/
pp.512-512
/
2009
본 연구는 자유지방산을 포함하고 있는 저품위 유지로부터 바이오디젤을 합성하는데 있어서 외부가열 방법 대신에 마이크로파를 이용한 내부 직접가열 방법으로 고체촉매 반응을 가속화한 연구에 관한 것이다. 대두유를 원료로 KOH 균일촉매를 이용한 전이에스테르화 실험에서는 섭씨 60도 상압조건에서 반응시간 3분에 95.4%의 전환율을 획득했다. 올레산과 고체산촉매를 이용한 자유지방산 제거 실험에서는 섭씨 60도 상압조건에서 solvent free 방식의 S-ZrO2는 반응시간 20분만에 93.7%의 제거율을 보였고 Rohm&Hass사의 Amberlyst-15dry 촉매는 반응시간 30분에 82.0%의 제거율을 보였다. 또한 바이오디젤 합성에 사용된 마이크로파의 총 에너지를 측정한 결과 외부가열 방법에 비해 약 1/3 수준임을 확인했다. 이것은 기존의 heat bath를 이용한 실험결과들과 비교할 때 반응속도가 약 10배 정도 향상되면서도 에너지효율이 높다는 것을 확인한 결과로서, 저품위 유지를 원료로 하는 바이오디젤 생산공정에서 마이크로파가 매우 효율적인 가열수단이 될 수 있음을 보여주었다.
Journal of the Korea institute for structural maintenance and inspection
/
v.14
no.6
/
pp.188-197
/
2010
This paper presents research result to study the change of structural capacity of reinforced concrete beams with various shear reinforcement ratios after damage by fire load. In addition, fundamental data are given in order to predict the strength variation of RC member due to fire damage by evaluating the previous calculation method codified in codes. Nine RC beam specimens were made and exposed to the fire controled by the standard fire curve. And the structural capacity was evaluated through a failure test under simple support condition. Previous code formula, ACI code and Eurocode were reviewed and used for the calculation of the strength of specimens damaged by fire. From the test, RC beam specimens exhibited very brittle failure when it exposed to fire controled by standard fire curve during more than one hour. And this failure pattern tended to be more serious when shear reinforcement ratio decreased or fire loading duration increased. From the evaluation of the calculation process in code, the change of strength due to fire can be properly predicted if the damage of materials is well defined.
Park, Bo-Ram;Choi, Su-Jeong;Kim, Na-Jeong;Han, Gui-Jung;Kim, Ha-Yun
Food Science and Preservation
/
v.24
no.1
/
pp.44-51
/
2017
For the production of Yakhobak (Cucurbita maxima subsp. maxima) paste under various heating conditions, we steamed Yakhobak for roughly 20 min, followed by heating under high pressure treatment for 0 min (HHP0), 20 min (HHP20), 40 min (HHP40), and 60 min (HHP60). The physicochemical and sensory characteristics were subsequently investigated. Generally, no significant difference was observed in organic acid content and sensory characteristics score between Yakhobak paste treated with and without high-pressure heating. However, there was a significant difference in color value, soluble solids, and free sugar content. The L value for color of the group HHP0, untreated control Yakhobak paste (no high-pressure heating), decreased as time increased from 20 min to 60 min, with L values of 44.33, 44.25, and 42.86, respectively. The b value for the color of Yakhobak paste also decreased, showing a significant difference. Soluble solids and free sugar (fructose, glucose, sucrose) contents of the high-pressure heat-treated groups HHP20, HHP40, and HHP60 decreased compared with untreated group HHP0. Organic acid composition of Yakhobak paste included citric acid, malic acid, and fumaric acid, and the major organic acid was malic acid. Sensory score of HHP40 was the highest among all experimental groups in terms of overall preference, but there was no significant difference.
Proceedings of the Korea Crystallographic Association Conference
/
2002.11a
/
pp.22-23
/
2002
Titanium은 높은 강도, 낮은 밀도, 부식에 대한 저항 등, 타 금속에 비해 월등히 뛰어난 성질을 가지고 있기 때문에 산업 전반에 거쳐 그 응용이 크게 증가하고 있으며, 특히 고온에서의 응용이 중요성을 띠게 됨에 따라 고온으로의 상전이 관계에 따른 구조적 규명이 필요하다. 순수한 titanium은 상온에서 조밀충진 육방정계의 α-상구조(a=2.953Å, c=4.683 Å, P6₃/mmc)를 이루고 있으나, 대략 880℃ 이상에서는 β-상의 체심입방정계 (a=3.320Å, Im3m)로 상전이가 되는 것으로 알려져 있다. 이에 대한 대부분의 연구가 kinetics와 thermodynamics에 관련되어 있으며, TEM을 이용한 직접가열실험은 거의 전무한 상태이다. 본 실험에서는 TEM 직접가열을 통하여 titanium의 고온에서의 상전이와 가열시 발생할 수 있는 산화층 형성을 연구하였다. TEM 시편은 순도 99.94%의 titanium foil(Alfa Aesar, #00360, 0.025mm thick)를 이용하였고, 분석 장비로는 에너지여과 기능이 있는 TEM(EM912 Omega, Carl Zeiss)과 Gatan사의 double-tilt heating holder를 사용하였다. Titanium의 상전이를 관찰하기 위해 900℃ 까지 분당 10℃ 의 속도로 가열을 하였다. 통계적 분석 오차를 줄이기 위해 서로 다른 4군데의 관찰영역을 선택하여, 상온 - 600℃ - 900℃ - 상온의 단계별로 회절패턴을 관찰 및 기록하였고, 발생 가능한 산화에 대해서는 동일한 장비를 사용하여 EDS 분석을 하였다. 상온에서의 서로 다른 영역의 회절패턴들은 결함의 존재에 상관없이, 온도가 증가함에 따라 그 결함수가 증가하게 된다. 특히 600℃ 에서는 쌍정과 관련된 회절점들이 본래의 회절점 주위에 형성되어있지만, 각 면들의 격자상수의 변화는 나타나지 않았다. 그러나 900℃ 에서는 쌍정에 의한 회절점의 수가 증가하며, 회절점 사이에 발달한 뚜렷한 막대모양의 강도분포와 격자상수의 변화를 관찰할 수 있었다. 다시 상온으로 냉각시킨 후 관찰한 각각의 회절패턴에서는 격자 상수의 감소와 함께 900℃에 보여진 막대 모양의 강도분포와 쌍정에 의한 회절점들이 여전히 남아있었다. EDS분석 결과 가열 실험을 통해 시편이 열적 산화가 되어 있음을 확인 할 수 있었다. 순수한 titanium의 α-상에서 β-상으로의 상전이를 파악할 수 있는 격자상수의 변화자체는 매우 작은 값이기 때문에 상온과 900℃ 에서 기록된 전자회절패턴 상에서의 면간거리와 면간각도의 측정만으로는 상전이 여부를 명확히 구별할 수 없었다. 그러나, 결함에 의한 상변화가 900℃ 에서 심하게 관찰되어지는 것은 상전이와 관계가 있는 것으로 볼 수 있다. 고온에서 상온으로의 가역적 반응을 관찰할 수 없었던 이유는 열적산화로 생긴 산화층의 산소원자들이 고온의 상전이 과정 중에 Ti 원자와 반응이 일어나 TiO/sub X/ 구조로 전이되었기 때문으로 추정하고 있다.
Journal of the Korea institute for structural maintenance and inspection
/
v.12
no.1
/
pp.91-100
/
2008
Multi-stepwise Thermal Prestressing Method(TPSM) is a newly proposed prestressing method, which is combined the external prestressing method and the external bonding method. Multi-stepwise thermal prestressing force is induced by cooling process of cover-plate in the multi-stepwise temperature distribution after the cover-plate being bolted to the girder. In this study, the heating capacity test of the developed heating system for applying the multi-stepwise TPSM effectively and multi-stepwise TPSM inducing test of H-beam is performed. Also, a field test of the rhamen type temporary bridge is carried out to evaluate the effect and application of the multi-stepwise TPSM. Truck load was loaded and compared with the structure analysis results.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.48-48
/
1999
티타늄 알루미나이드 합금은 이들의 강도나 고온 특성 때문에 초음속 비행기의 구조물질이나 수소를 연료로 사용하는 비행기의 엔진물질로 각광받고 있다. 그러나 티타늄 알루미나이드 합금들은 이들이 갖는 규칙적인 미세구조로 인하여 실온에서 낮은 연성을 나타내는 단점이 있다. 실온에서 낮은 연성을 갖는 티타늄 알루미나이드 합금의 단점은 텅스텐, 물리브덴, 니오비움, 탄타륨, 바나디움 등의 베타 안정화 물질들을 첨가함으로서 어느정도 극복되고 있다. 따라서 티타늄 알루미나이드 합금이 초음속 비행기의 구조 물질이나 수소를 사용하는 엔진 물질로 사용되기 위해서는 이 물질들의 산화연구가 필수적이다. 지금까지 티타늄의 산화연구에서 알루미늄이나 니오비움의 역할에 대해서는 여러 연구자들이 연구를 한 바 있다. Chaze와 Coddet는 알루미늄이 티타늄에서 산소의 용해도를 감소시키고, Chen과 Rosa는 니오비움이 티타늄에서 산화물 형성율을 낮춘다는 것을 각각 알아냈다. 그러나 지금까지 티타늄 알루미나이드의 산화연구는 충분하지 못했다. 지금까지 티타늄 알루미나이드의 산화연구에서 밝혀진 산화운동학의 내용은 가열온도와 가열시간에 따라 크게 다른 두 개 혹은 그 이상의 산화물을 갖는다는 것이다. 본 연구의 목적은 여러 가지 티타늄 알루미나이드 합금의 산화특성을 밝히는 것이다. 이를 위하여 첫 번째 실험은 실온 공기 중에서 자연적으로 산화된 여러 가지 티타늄 알루미나이드 합금들($\alpha$2,$\beta$,${\gamma}$)을 초고진공($\leq$10-11Torr)속에 넣고, 시료의 온도를 실온에서 100$0^{\circ}C$까지 변화시키면서 AES(Auger Electron Spectroscopy)와 ISS(Ion Scattering Spectroscopy)를 사용하여 각각의 온도에서 여러 가지 시료들의 표면조성을 조사했다. 두 번째 실험은 티타늄 알루미나이드 시료를 고순도 공기(hydrocarbon$\leq$0.1^g , pp m) 중에서 각각 $600^{\circ}C$에서 100$0^{\circ}C$까지 가열하여 산화시켰다. 이 시료의 산화도는 각각의 가열온도에서 가열시간을 변하시키면서 TGA(Thermogravimetric Apparatus)로 측정했다. 실온 공기중에서 자연적으로 산화된 여러 가지 티타늄 알루미나이드 합금들을 초고진공속에 넣어 100$0^{\circ}C$까지 가열한 실험에서는 이들 시료에 포함된 알루미늄의 양에 따라서 표면 조성이 크게 다른 것을 알 수 있었다. 그리고 고순도 공기 중에서 100$0^{\circ}C$까지 가열하여 산화시킨 티타늄 알루미나이드 산화물의 산화기구는 명백한 3단계 포물선 산화의 특성을 나타냈다.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.32
no.8
/
pp.101-108
/
2004
The thermomechanical tensile characteristics were evaluated for A12024-T3 under heating rates from $1^{\circ}C/sec\;to\;30^{\circ}C/sec$ by using an infrared heating equipment to simulate aerodynamic heating. The rapid heating test results were compared with tensile test results after 1/2 hour exposure in terms of yield stress to investigate the influence of heating condition. A heating rate-yield temperature parameter was suggested for rapid heating based on time-temperature parameters, and master yield stress curve was obtained by using these parameter. These test results can be used for margin of safety of supersonic vehicle structures subjected to aerodynamic heating.
This study was carried out to observe the change of organoleptic properties of the juice prepared with various heating temperature and heating time. Organoleptic color showed maximum value at 94.95$^{\circ}C$ and 21.63 min and organoleptic aroma showed maximum value at 63.14$^{\circ}C$ and 20.38 min. Organoleptic taste showed maximum value at 96.63$^{\circ}C$ and 14.31 min and overall palatability showed maximum value at 97.18$^{\circ}C$ and 14.55 min. The best condition was 98$^{\circ}C$(heating temperature) and 13 min(heating time) at organoleptic evaluation of oriental melon juice.
산불과 같은 대형화재는 철탑의 전선이나 애자와 같은 부착물의 기능에 많은 장애를 유발할 수 있어 송전선로 운영에 큰 영향을 미치게 될 수 있다. 만약 이와 같은 재해로 인해 송전선로의 운영에 차질이 생긴다면 산업전반에 걸쳐 엄청난 파급효과를 초래시킬 것이 다. 본 논문에서는 산불과 같은 화재가 송전용 폴리머애자에 미치는 영향을 파악하기 위하여 산불의 불꽃을 모의한 실험장치를 제작하였으며, 시료로는 현재 송전선로에 사용되고 있는 송전용 폴리머애자를 축소 제작한 폴리머애자와 자기애자를 사용하였다. 산불모의 인공화염 실험은 가열시간의 경과에 따라 폴리머애자의 하우징과 자기애자의 디스크 변화를 관찰하였고, 가열실험이 끝난 애자들을 이용하여 전기적인 시험과 기계적인 시험을 행하였다. 이 실험 데이터를 바탕으로 폴리머애자와 자기애자의 특성변화를 비교 분석하여 산불영향이 송전용 폴리머애자에 미치는 영향을 연구하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.