• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.39-50
• /
• 2016

Negative crystal shaped $CO_2$-rich fluid inclusions, trapped as primary inclusions in neoblasts and as secondary inclusions in porphyroblasts, were studied in spinel peridotite xenoliths from Jeju Island. Based on microthermometric experiments, the solid phase melts at $-57.1^{\circ}C$(${\pm}0.9^{\circ}C$) with no other observable melting events, indicating that the trapped fluid is mostly $CO_2$. The homogenization temperatures show a much wider range from $-39^{\circ}C$(${\rho}=1.12g/cm^{3)}$) to $23^{\circ}C$(${\rho}=0.82g/cm^{3)}$), suggesting that most of the inclusions (originally trapped at mantle conditions) re-equilibrated to lower density values. Nevertheless, the highest density $CO_2$ in our fluid inclusions is consistent with entrapment of fluids at upper mantle pressures (and depths). The calculated trapping pressure from $CO_2$-rich fluid inclusions that appear to be free from re-equilibrium, e.g., showing the lowest homogenization temperatures, is ${\approx}0.9GPa$. Based on the petrographic evidences, the fluid entrapment can be regarded as a late stage event in the evolution of the shallow lithospheric mantle.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.596-602
• /
• 1994

To separate and concentrate mucilage from yam(Dioscorea batatas DECNE), yam was dried, microparticulated using impact mill and air-classified at different air classifying wheel speed(ACWS) in classifier. As ACWS increased from 5,000 rpm to 22,500 rpm, the contents of dietary fiber, protein and lipid of air classified microparticles(ACM) increased remarkably. Especially the ACM with ACWS over 15,000 rpm showed 36.41% dietary fiber and 16.66% protein. The dietary fiber and protein components were concentrated to $2.5{\sim}9.0$ times as compared with whole yam powder. Concomitantly the non-fibrous carbohydrate decreased from 88.31% to 16.84. The damaged starch(%), WSI and WAI of ACM of ACWS over 15,000 rpm were $1.5{\sim}3.0$ times higher than those of ACM under ACWS 15,000 rpm. The apparent viscosity of ACM was 0.0800 Pa s over ACWS 15,000 rpm and 0.0080 Pa s under ACWS 15,000 rpm. Judging from viscosity of ACM, the mucilage component of yam was concentrated to 10 times. In conclusion, the optimum process to separate and concentrate the mucilage from yam consisted of the microparticulation to $5{\sim}30{\mu}m$ and the air-classification at ACWS over 15,000 rpm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.345-356
• /
• 1996

Properties of enzymatic hydrolysates from ascidian tunic were assessed on supernatant ratio, solid yields and solid concentration. The concentartion of solid and yields in the extracts were increased as the enzyme concentration raised from $100\;{\mu}l\;to\;1000{\mu}l$ during the extraction period. The optima concentration and reaction time of each enzyme on digestion were $400\;{\mu}l$ 60 minutes, through treated with Duncan's multiple test. The percent of yields of solid, protein and carotenoids for 60 minutes extraction at $400\;{\mu}l$ were $32.32\%,\;1.34\%\;and\;74.60\;mg\%$, respectively, in Viscozyme systems. The extracts were composed with many kinds of carbohydrates such as arabinose, ribose, xylose, galactose, glucose, N-acetyl-D-galactosamine, and N-acetyl-D-glucosamine. Aspartic and glutamic arid were noted as predominant amino acids in all parts. Amino acid profiles of various ascidian tunic part were similiar to each other, but most of essential amino acids content of inter coat was higher than that of root and tunic (body). About sixty six fatty acids components were observed, and their distribution among neutral and polar lipids was compared. The main fatty acids were found to be 14:0, 16:0, 16:1n7, 18:0, 18:1n9, 18:1n7, 18:2n6, 20:5n3, and 22:6n3.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.344-351
• /
• 2006

The purpose of this study was to evaluate the thermal expansion characteristics of injectable ther-moplasticized gutta-perchas and a Resilon. The materials investigated are Obtura gutta-percha, Diadent gutta-percha, E&Q Gutta-percha Bar and Epiphany (Resilon). The temperature at the heating chamber orifice of an Obtura II syringe and the extruded gutta-percha from the tip of both 23- and 20-gauge needle was determined using a Digital thermometer. A cylindrical ceramic mold was fabricated for thermal expansion test, which was 27 mm long, with an internal bore diameter of 3 mm and an outer diameter of 10 mm. The mold was filled with each experimental material and barrel ends were closed with two ceramic plunger. The samples in ceramic molds were heated in a dilatometer over the temperature range from $25^{\circ}C$ to $75^{\circ}C$. From the change of specimen length as a function of temperature, the coefficients of thermal expansion were deter-mined. There was no statistical difference between four materials in the thermal expansion in the range from $35^{\circ}C$ to $55^{\circ}C$ (p > 0.05). However, Obtura Gutta-percha showed smaller thermal expansion than Diadent and Metadent ones from $35^{\circ}C$ to $75^{\circ}C$ (p < 0.05). The thermal expansion of Epiphany was similar to those of the other gutta-percha groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.4
• /
• pp.390-397
• /
• 1992

This study was carried out to analyze the physicochemical properties of bovine milks, which were heated with LTLT, HTST, UHT pasteurization and UHT sterilization methods and to compare the heat intensity among the heating methods and samples. The mean HMF values per liter milk were measured as 0.66~1.62 $\mu$M (LTLT), 0.9~1.78$\mu$M (HTST), 3.53$\mu$M(UHT pasteurized) and 7.43~8.97$\mu$M (UHT sterilized) in samples, re- sportively. The available Iysine contents per 100ml milk showed 293.2 mg (Raw), 289.2~291.2 mg (LTLT), 298.4~292.4mg (HTST), 272.4~261.6mg (UHT pasteurized) and 279.0mg (UHT sterilized), respectively. The rates of whey protein denaturation were 9.5~11.4% (LTLT), 9.5~17.1% (HTST), 89.3~95% (UHT pas-tsterilized) and 62.7% (UHT sterilized), respectively. The contents of SH groups per g protein were determined as 2.86$\mu$M (Raw) and 2.95~3.15$\mu$M (LTLT), 3.08~3.18$\mu$M (HTST), 3.26~3.42$\mu$M (UHT Pasteurized) and 3. 36$\mu$M (UHT sterilized), respectively, The SS groups Contents per g protein were 28.93$\mu$M (Raw), 25.72~26. 51 $\mu$M (LTLT), 26.93~26.79$\mu$M (HTST), 23.65~23.04 $\mu$M (UHT pasteurized) and 24.69$\mu$M (UHT sterilized), respectively. The ascorbic acid contents per liter milk were measured 6.05mg (Raw), 1.47~1.65mg (LTLT), 2.50~3.85mg (HTST), 2.87~3.69mg (UHT pasteurized) and 4.50mg (UHT sterilized). The changes of some in-dices in milk samples depend on the heating temperature and time ; the HMF values, SH groups, whey protein denaturation rates increased, while the available lysine contents and SS groups decreased in LTLT, HTST, UHT pasteurized and UHT sterilized milks. No remarkable differences were found in heating indicators between LTLT and UHT milks.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.219-222
• /
• 1996

수열법은 밀폐용기중에서 10$0^{\circ}C$이상의 가열, 가압된 수용액이 반응에 관여하는 것으로써, 수정, CaCO3, AlPO4, GaPO4 등과 같은 단결정의 육성 뿐만 아니라 균일분산계로부터 균일한 결정성의 미립자 합성에도 폭넓게 이용되고 있다. 세라믹분말의 합성에 있어서, 이 방법은 특히 형상, 입자크기의 제어가 용이할 뿐만 아니라 고상법, 졸-겔법, 공침법에서와 같은 열처리, 분쇄과정이 필요없기 때문에 고순도의 초미립자를 얻을 수 있는 장점이 있다. 근년 미국, 일본에서는 수열법을 이용한 유전, 압전체 등 세라믹분말의 일부가 공업적인 규모로 대량 생산되고 있다. 그러나 이에 대한 국내 기술은 아직 초기단계에 이르고 있는 실정이다. 따라서 본 연구실에서는 수열법에 의한 단결정 육성 (예; 자수정, CaCO3, AlPO4, GaPO4, KTP, Emerald 등), 박막제조 (예; GaP, PbTiO3, BaTiO3 등), 정제 (고령토, 장석, 도석 등), 원석처리 (진주, 인공 emerald, 비취 등) 그리고 각종 세라믹분말의 합성 등과 같은 다양한 기반기술의 축적과 동시에 공업화에 대응한 수열장치를 위하여 반응용기의 대형화, 엄밀한 밀폐방식, 실용적인 수열조건 등을 개발해 오고 있다. 본 발표에서는 현재까지의 연구개발 내용 중에서 결정성 미립자에 관련한 세라믹분말의 합성에 대한 일부의 결과들을 보고한다. 일반적으로 수열장치는 전기로, 반응용기, 온도 및 압력제어계 등을 기본으로 하고 있으며 시판용의 대부분이 교반기가 부착된 수직형 (vertical type)이다. 이와 같은 방식에 있어서는 엄밀한 밀폐가 곤란, 반응온도의 한계성 (25$0^{\circ}C$ 이하), 증진율의 한계성 (소량생산) 등과 같은 점이 있기 때문에 본 연구실에서는 개폐식 전기로내에 엄밀한 밀폐가 가능한 수평식(horizontal type)의 반응용기를 채택한 뒤 이를 회전 또는 시이소(seesaw)식으로 움직일 수 있도록 하여 연속공정화, 온도구배의 자율조절 그리고 보다 저온에서도 인위적인 이온의 확산을 효율적으로 유도할 수 있도록 하였다. 이와 같은 방식은 기존의 방식과 비교하여 반응용기 내에 응집현상과 미반응물이 존재하지 않으며 또한 단분산으로 결정성 미립자를 대량적으로 얻을 수 있는 장점이 있었다. 다음은 이상과 같이 본 연구실에서 자체 개발한 수열장치를 이용하여 PbTiO3, (Pb,La)TiO3Mn, BaTiO3, ZnSiO4:Mn, CaWO4 등과 같은 세라믹분말에 대한 합성 실험의 결과이다. 압전성, 초전성이 우수한 PbTiO3 및 (Pb,La)TiO3:Mn 분말의 수열합성은 PbO, TiO2, La2O3 등의 분말을 출발원료로 하여 합성도도 25$0^{\circ}C$부근의 알카리성 용액중에서 결정성 PbTiO3 및 (Pb,La)TiO3:Mn 미립자를 단상으로 얻었으며 입자의 형상 및 크기는 합성온도와 수열용매의 종류에 의존하였다. 유전체로서 폭넓게 응용되고 있는 BaTiO3 분말은 Ba(OH)2.8H2O, TiO2와 같은 최적의 출발원료를 선택함으로써 15$0^{\circ}C$ 부근의 저온영역에서도 용이하게 합성할 수 있었다. 특히 본 연구에서는 수용성인 Ba(OH)2.8H2O를 사용함으로써 host-guest적인 반응을 유도시키는데 있어 물의 가장 실용적이고 효과적인 수열용매임도 알았다. ZnSiO4:Mn, CaWO4, MgWO4와 같은 형광체 분말은 공업적으로 고상반응 또는 습식법에 의해 얻어지고 있으나 이들 방법에 있어서는 분쇄공정으로 인한 형광특성의 저하와 같은 문제점이 있다. 따라서 본 연구에서는 수열법을 이용하여 이들 화합물의 합성을 시도하였으며 그 결과 합성온도 30$0^{\circ}C$ 부근의 알칼리성 용액중에서 수열적으로 얻어짐을 알았다. 여기서의 합성분말을 이용하여 실제 조명램프로 제조한 결과 녹색, 청색 발광용 형광체로서 우수한 형광특성을 나타내었다. 천연에서 소량 산출되고 있는 고가의 (Li,Al)MnO2(OH)2:Co 분말은 도자기의 전사지용 청색안료로써 이용되고 있다. 본 연구실에서는 LiOH.H2O, Al(OH)3, MnO2 등의 분말을 출발원료로 하고 24$0^{\circ}C$ 온도 부근 그리고 물을 수열용매로 하여 천연산에 필적하는 (Li,Al)MnO2(OH)2:Co 분말을 인공적으로 합성하였다.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.213-220
• /
• 2014

This study was conducted to evaluate the effects of high n-3 or n-6 diet on free fatty acid profile and meat quality traits of pork loin. The 20 heads of commercial $Landrace{\times}Yorkshire{\times}Duroc(LYD)$ crossbreed pigs ($90.9{\pm}2.4BWkg$) were divided into four groups by added fat and oils, such as 5% tallow (Control), 5% linseed oil (T1), 5% safflower oil (T2), and mixture of linseed oil (2.5%) + safflower oil (2.5%) (T3), then reared 4 weeks. Pork loins were taken after slaughter, then sliced in 2 cm thickness and put in low-density polyethylene (LDPE) bag for analysis. T1 showed significantly high concentration of linolenic acid ($2.35{\pm}0.21%$) (p<0.05). The total amount of saturated fatty acids (SFA), mono-unsaturated fatty acids (MUFA) and poly-unsaturated fatty acid (PUFA) was significantly high in T1 ($36.05{\pm}1.18%$), C ($22.60{\pm}2.11%$) and T2 ($47.80{\pm}1.29%$), respectively (p<0.05). However, the ratio of n-6:n-3 was significantly low in T1 ($11.57{\pm}0.90$) than that of T2 ($37.56{\pm}12.51$) (p<0.05). There was no signigicant difference in lightness, redness, pH, water holding capacity and cooking loss between treatments (p>0.05). However, the yellowness of T2 was significantly higher than others (p<0.05). From those results, it was considered that feeding high n-3 and n-6 fatty acid diet to pig enables modify fatty acid profile of pork without any side effect on meat quality.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.203-210
• /
• 2002

In order to elucidate the growth mechanism of sulfide chimney formed as a result of seafloor hydrothermal mineralization, we carried out the mineralogical and fluid inclusion studies on the inactive, sulfide- and silica-rich chimney which has been recovered from a hydrothermal field in the Cleft segment of the Juan de Fuca Ridge. According to previous studies, many active and inactive vents are present in the Cleft segment. The sulfide- and silica-rich chimney is composed of amorphous silica, pyrite, sphalerite and wurtzite with minor amounts of chalcopyrite and marcasite. The interior part of the chimney is highly porous and represents a flow channel. Open spaces within chimneys are typically coated with colloform layers of amorphous silica. The FeS content of Zn-sulfides varies widely from 13.9 to 34.3 mole% with Fe-rich core and Fe-poor rims. This variation possibly reflects the change of physicochemical characteristics of hydrothermal fluids. Chemical and mineralogical compositions of the each growth zone are also varied, possibly due to a thermal gradient. Based on the microthermometric measurements of liquid-rich, two-phase inclusions in amorphous silica that was precipitated in the late stage of mineralization, minimum trapping temperatures are estimated to be about 1140 to 145$^{\circ}$C with the salinities between 3.2 and 4.8 wt.% NaCI equiv. Although the actual fluid temperatures of the vent are not available, this study suggests that the lowtemperature conditions were predominant during the mineralization in the hydrothermal field at Cleft segment. Comparing with the previously reported chimney types, the morphology, colloform texture, bulk chemistry, and a characteristic mineral assemblage (pyrite + marcasite + wurtzite + amorphous silica) of this chimney indicate that the chimney have been formed from a relatively low-temperature (<250$^{\circ}$C) hydrothermal fluid that was changed by sluggish fluid flow and conductive cooling.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.916-923
• /
• 1998

To provide more information on the enteric pathogen Campylobacter jejuni in the view of food sanitation, survival characteristics of two strains of C. jejuni in the different conditions were investigated. When $10^7{\;}or{\;}10^3{\;}per{\;}ml$ of C. jejuni cells were inoculated in the supplemented Brucella broth and kept at $42^{\circ}C,{\;}25^{\circ}C{\;}and{\;}5^{\circ}C$ under the static aerobic condition for 7 days, organisms exponentially proliferated to $a{\;}>10^8$, even in the $10^3{\;}per{\;}ml$ inoculated-sample at $42^{\circ}C{\;}for{\;}1{\sim}2{\;}days$ and the considerable level of viability maintained during 7 days. At $5^{\circ}C$, most of the initial level of organisms survived at the early period and only $a{\;}<{\;}0.5-log_{10}$ cells decrease were observed during the 7 days. At $25^{\circ}C$, a remarkable number of C. jejuni declined within $1{\sim}2{\;}days$ and showed undetectable level of cells after 4 days. When sterile milk and minced chicken meat were artifically inoculated with $10^7{\;}per{\;}ml$ of C. jejuni, mostly, a $1-to{\;}2-log_{10}$ count decrease occurred at $42^{\circ}C{\;}and{\;}5^{\circ}C$ while $a{\;}>3{\;}log_{10}$ decrease at $25^{\circ}C$ during 7 days. Unexpectedly, no colonies appeared on the plate inoculated from the minced chicken meat sample kept at $42^{\circ}C$ after 4 days. The results suggest that C. jejuni contaminated to food can survive at the refrigeration temperature whereas they are sensitive to at the room temperature. Also, it is shown that the growth of C. jejuni at the optimal temperature may vary to the food sources.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.116-125
• /
• 2018

This study was carried out physicochemical and sensory evaluation to compare the quality characteristics of pork loins from Yorkshire, Duroc, Pietrain, and Duroc ${\times}$ Pietrain (DP). A total of 79 pigs from Yorkshire(22), Duroc(22), Pietrain(17), and DP(18) was used for the experiment. After 24 hours of cooling, pork loins were gathered and vacuum-packed from left carcasses and then the physicochemical traits and sensory evaluation were conducted. The pH of the loins from breed Pietrain was lower than those of the other breeds (p<0.01). While the moisture content of loins was higher in Pietrain than in the other breeds (p<0.01). The fat content of loins was higher in Duroc and DP than in the other breeds and lower in Pietrain than in the other breeds (p<0.01). Pietrain loins had the lowest drip loss (p<0.01) and the highest water holding capacity (p<0.01). There were no significant differences in the cooking loss and shear force of the loins among 4 breeds (p>0.05). There was a significant difference in the CIE color L*, a* and b* values of the loins from 4 breeds (p<0.01). Sensory scores of the loins were ranked lower in Pietrain in overall. The results of this study indicate that meat quality could be altered according to the breeds.