• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.16-23
• /
• 2019

This paper describes the design and analysis of a periscope imaging system installed at the engine test facility in the Agency for Defense Development. The periscope system is a cylinder-shaped image observation system installed at the rear of the engine and at the top of the diffuser. The periscope system has high risk of breaking because it is directly affected by high temperature (2300 K) and products of combustion. Thus, we used 1D heat transfer calculation, and 2D and 3D CFD analysis to confirm the heat flux and temperature distribution. Also, the cooling performance was verified. In the current design, using the periscope system, we can see flame shapes, control of the nozzle, and stability of the exhaust flow visually.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2013

In order to dissolve Au, Ag, and other valuable metals from gold ore concentrate, raw gold concentrate was pre-treated by roasting and salt-roasting at $750^{\circ}C$. The roasted concentrate was treated with aqua regia digestion to dissolve the valuable metals and higher amount of Au, Ag, and valuable metals were extracted from the roasted concentrates than from the raw concentrate. Higher amount of these metals were also extracted from the salt-roasted concentrate than from the roasted concentrate. The results of the gold dissolution experiments showed that the gold dissolution was most efficient when particle size, roasting temperature, and the percentage of added salt in salt roasting were about $181{\sim}127{\mu}m$, $750^{\circ}C$, and was 20.0%, respectively. The XRD analysis suggests that quartz and pyrite were not destroyed even through roasting at $750^{\circ}C$ and decomposition with aqua regia. However, through salt roasting, pyrite was completely decomposed, whereas quartz could not be destroyed through salt-roasting at $750^{\circ}C$ and aqua regia digestion. Accordingly, it was expected that the gold contained in quartz can not be dissolved through salt-roasting and treatment with aqua regia.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.645-654
• /
• 2000

The aim of this study was to described the genetic structure of Eleutherococcus senticosus in Korea. We investigated 10 patches, which are eight Korean patches and two foreign patches come from Russia and China growing at Korean habitat, using ISSR(inter-simple sequence repeats) markers. In ISSR PCR, the overall percentage of polymorphic ISSR amplicons was 76% and the mean number of amplicons per ISSR primer was 11.5, which were higher than the RAPD results for the some cultivars collected in Korea(Kim et al., 1998) ; 57% and 5.7, respectively. So ISSR markers provide more powerful tool than RAPD markers for the investigation of genetic variation in E. senticosus. There are relatively high genetic variation among patches as 62.8%, but low variation within eight Korean patches. Such pattern of genetic variation, which is not ordinary in other tree species, may be result from the narrow and limited habitats and the asexual reproduction of this species at the natural stands in Korea. Although the small sample size in this study seemed to be resulted in the high genetic variation among patches, the overall genetic interpretation of this study might not be much affected on the basis of the characteristics of the distribution and the reproduction system of E. senticosus. Analysis of genetic distance between all pairs of the patches did not reveal any trends with regard to geographic distance, which was confirmed by the results obtained from AMOVA(analysis of molecular variance) and PCA(principal component analysis). These results suggest that, in addition to the preservation of the natural stands, the conservation of larger number of patches with small number of individuals per patch is more effective for the ex situ conservation and for maintaining the genetic diversity of E. senticosus in Korea than smaller patches with large number of individuals.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.1-6
• /
• 2013

When the pressurization system that uses difference of pressure for smoke control is designed, the factors influencing on the pressure field in building should be applied to design process and the stack effect is one of the main factors. Numerical analysis based on network model in 20-story building is carried out to analyze the pressurization system of smoke control in consideration of stack effect. Calculations are conducted for three conditions, that is, stack effect only, pressurization only and stack effect plus pressurization. Results including the detailed pressure field and flow rate at each floor are represented and the stack effect are effectively visualized. Meanwhile, the pressure of stairwell is increased as much as the summation of the stack effect and pressurization, and the problem induced by rise of pressure is pointed out.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.3
• /
• pp.9-21
• /
• 2020

In this study, the design method of the combined sheet pile was considered in the coastal landfill where sandy and clayey soils are mixed, and the behavior in excavation was analyzed. It was confirmed from the elasto-plastic analysis that the predicted behavior of the temporary facilities of earth retaining differs according to the type of the combined sheet pile method (Built up, Interlocking, Welding) and the analysis method (soldier pile method, continuous wall method). In the case of sheet pile member force, the results of the continuous wall analysis method predicted the most conservative results. When the stress ratio (calculation/allowance) of each member was analyzed based on the maximum member force of the combined sheet pile method, the maximum value was obtained for bending moment in the side pile and combined stress in the case of the strut. As a result of finite element analysis, the member force of the side pile was the largest in the short-term effective stress analysis condition, while the compressive force of the strut was large in the consolidation analysis. When comparing the results of the elasto-plastic analysis and the finite element analysis, the shear force of the side pile and the axial force of the strut were greatly evaluated in the elasto-plastic analysis, and the bending moment of the side pile was the largest in the short-term effective stress condition of the finite element analysis. In addition, the displacement of the side pile was predicted to be greater in the finite element analysis than in the elasto-plastic analysis.

• Journal of the Korean Chemical Society
• /
• v.45 no.5
• /
• pp.436-441
• /
• 2001

The emission and excitation spectra of mer-[Cr(dien)(glygly)]ClO$_4$(glygly=glycylglycinate;dien=N-(2-aminoethyl)-1,2-ethanediamine) taken at 77 K are reported. The infrared and visible spectra at 298 K are also measured. The twelve electronic bands due to spin-allowed and spin-forbidden transitions are assigned. Using the observed transitions, a ligand field analysis has been performed to determine the bonding property of coordinated atoms in the chromium(III) complex. It is confirmed that the amine nitrogen atoms of the dien and glygly have strong $\sigma$-donor characters, but the peptide nitrogen of glygly has weak $\pi$-donor property toward chromium(III) ion.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.61-67
• /
• 2008

This study is focused on the numerical predictions of heat and smoke exhaust characteristics in an underground subway station stopping a fire train. Various ventilation operating modes with the fan equipped the platform and tunnels are considered. Distributions of temperature, carbon monoxide and visibility at a height of 1.7 m(breath height) above the platform are analysed for different ventilation fan operation mode. The numerical results show that smoke and heat is rapidly removed through tunnel by operating the tunnels fans. We suggested that during evacuation of passengers is not completed, the ventilation system in the platform is activated. After completion of passenger evacuation tunnel fans are activated but the fans in the platform are stopped.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.620-623
• /
• 2004

도시하천인 청계천 유역의 물순환 해석을 위한 기초자료로 강우량, 유출량, 상하수도랑, 지하수이용량, 지하수위 변화에 의한 유역 저류량 등의 관측자료를 이용하여 연간 물수지 분석을 수행하였다. 청계천 유역의 물순환 구조는 자연계 유출과 인공계 배수의 구조를 지니고 있으며, 이들의 수문성분을 규명하기 위해서는 각각의 수문성분들의 관측 및 해석이 필요하며, 각 수문성분들의 물수지 분석을 통하여 정량적인 합의 결과를 가시적으로 확보함이 매우 중요하다. 신뢰도와 정확성에 근거한 관측자료를 이용한 물수지 분석은 수문성분들의 총체적 표현이라 할 수 있는 모형(model)의 중요 입력자료이며, 모형의 모의 분석결과를 검증할 수 있는 중요한 기준이 된다. 청계천 유역에 기 설치된 수문모니터링 자료로 물수지 분석을 수행하는 데는 많은 제약과 한계성이 따르므로, 지속적인 수문관측 및 모니터링이 수행된다면 복원 이후 장래의 건전한 물순환 대책 수립에 기여 할 것이다.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.2
• /
• pp.23-32
• /
• 2001

A soil wall reinforced by soil nailing is excavated in the typical soil conditions which are consisted of weathered soil, weathered rock and soft rock. The resulting nail loads computed are compared to loads measured by utilizing strain gauges during construction. The wall deflection at two locations are related to construction events and specific soil conditions, providing an understanding of the behavior of soil nailed walls. The load distribution along the nail indicated relatively high loads close to the wall. The mobilized load on the nail is proportional to the wall deflection showing the maximum value at the surface of the wall. The construction monitoring for this project provided valuable information in understanding the behavior of soil nailed walls.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.80-90
• /
• 1997

The purpose of this study is to evaluate the validity examination of the J-R curve characteristics for the nuclear reactor pressure vessel steels and Al alloys by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agree well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The J-R curve obtained by the ASTM unloading compliance method is over-predicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load-displacement curve without particular crack measurement equipment.