Proceedings of the Optical Society of Korea Conference
/
2002.07a
/
pp.194-195
/
2002
투명 전도성 박막은 저방출 코팅, 평판디스플레이의 투명전극, 플라즈마 디스플레이 패널(PDP)의 전자파 장해 차폐 둥의 넓은 영역에서 사용되고 있다 특히 PDP의 전자파 장해(electromagnetic interference; EMI)를 막기 위한 필터는 광학적으로 가시광선영역의 높은 투과율과 전도성이 우수한 전기적 특성을 갖고 있어야 한다 이러한 고 효율의 투명전도성 박막은 일반적으로 (산화물-금속-산화물) 형태로 제작된다(1). (중략)
This study was performed to assess the clay impact on alga growth which was a primary producer, in view of food chain in ecosystem. As clay minerals caused turbidity, a low sedimentation, high adsorption capacity with organic matter, adsorption - desorption effect with ionic chemicals, clay minerals were supposed to have a significant effect on the aquatic system. In study we tried to turn out NOAEL (No-observed-adverse-effect-level) of clay materials on the algae growth inhibition using such as kaolinite, sericite and montmorillonite. This study was indicated. (1) In both of kaolinite and sericite, the $72hr-EC_{50}$ of them shows 2,752 mg/L and 2,775 mg/L, respectively. (2) On the other hand, in the case of montmorillonite, the $72hr-EC_{50}$ is not shown a significant difference to that of control samples. (3) It can be explained that is also a very important parameter in an alga growth. Because an alga growth was increased when the permeability of W visible radiation was increased in all clay cases. (4) It is demonstrated alga growth was affected by the characteristics of clay materials. Hence we can assess the $\ulcorner$water environmental risk assessment caused clay materials$\lrcorner$ using the alga growth inhibition level indirectly.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2010.06a
/
pp.216-216
/
2010
ITO는 n- type 반도체 재료로 Sn의 첨가로 인한 매우 낮은 전기저항과 안정성때문에 널리 사용되고 있는 재료이며 비교적 높은 band gap(3.55Ev)를 가짐으로 인하여 가시광선 영역에서 높은 투과도를 가지는 특징이 있다. 단점으로는 박막 제조 시에 증착시간의 증가함에 따라 음이온 충격 및 온도 상공으로 인한 막의 표면손상이 발생하게 되고 이것은 전기저항이 증가하는 요인으로 작용하는 문제점이 있다. 본 연구에서는 3가지 조성의 ITO박막을 스퍼터 장치를 이용하여 증착하고 그에 따른 전기적, 구조적, 광학적 특성을 분석 하였다. 증착된 ITO성막의 표면분석을 위해 AFM (Atomic Force Microscope)으로 표면 거칠기값 분석, XRD (X-ray diffraction)을 이용 결정성장분석, SEM (Scanning Electron Microscope)으로 표면의 미세구조관찰, 4Point pobe로 면 저항분석, spectrophotometer로 박막의 투과율과 흡수율을 분석하였다. 조성변화와 공정변수에 따른 전기적, 구조적, 광학적 특성변화의 원인분석으로 고효율의 ITO 박막성장 가능성을 조사하였다.
UV curable hard and color coatings were formed on polycarbonate(PC) films. The coating materials were composed of a commercially available end-capped polyester(EB830), diacrylate monomer(HDDA), silicon acrylate, photoinitiator, and organic dye as a coloring agent. The surface properties of coating films were evaluated, and the influences of the compositions of coating materials were investigated. The coating films showed high transmission and good adhesion between coating layer and PC substrate. And the coating films exhibited higher hardness than bare PC film. The coating films with various colors were obtained by wet process, and the clear and color window lenses for mobile phone were prepared successfully.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.410-410
/
2012
투명 전도성 TCO (Transparent Conductivity Oxide)박막 중 ITO (Indium Tin Oxide) 박막은 n-type의 전도특성을 갖는 산화물로서 가시광선 영역에서의 높은 투과율, 전기 전도도, 넓은 밴드갭을 나타내기 때문에 디스플레이 및 태양전지 분야에 널리 사용 되어 지고 있다. 이 실험에서는 ITO 증착시 산소 유량의 변화에 따라 특성의 변화를 관찰하고자 실험을 진행 하였다. 실험에서 산소 유량은 0 sccm에서 12 sccm까지 변화를 주었으며, ITO는 RF 마그네트론 스퍼터를 이용하여 유리위에 증착하였다. 실험에서 인가된 RF power는 2 kW, 13.56 MHz, 공정 압력은 $4.5{\times}10^{-6}torr$에서 진행하였다. 유리와 타겟 사이의 거리는 200 mm로 고정하였으며, 온도는 상온에서 공정을 진행하였다. 증착된 ITO의 전기전도도(${\sigma}$)는 3 sccm까지는 증가하는 경향을 보이다가 그 이후부터는 감소하는 것을 확인 할 수 있었다. 투과율과 이차전자방출계수의 결과 또한 전기전도도와 유사한 경향성을 보여 주었다. 이를 통해 3 sccm의 산소 유량으로 증착된 ITO의 전기적 특성이 가장 좋은 것으로 확인이 되었다.
HEMA/vinyl-substituted polyphosphazene was prepared by the ring-opening polymerization of phosphonitrillic chroride trimer at $200{\sim}300\;{^{\circ}C}$, followed by Grignard reaction with vinyl magnesium bromide and then by the reaction with HEMA(2-hydroxyethyl methacrylate). HEMA/vinyl-substituted polyphosphazene was copolymerized with EGDMA(ethylene glycol dimethacrylate; used as a cross-linker for the free-radical copolymerization), NVP (N-vinyl-pyrrolidone) in the presence of AIBN (azobisisobutyronitrile) as a radical initiator. The oxygen transmissibility, water content and visible-ray transmissibility of the resulting copolymer were measured to be Dk/t 88, 30.89% and 87%, respectively, indicating that the copolymer can be used as a good contact lens material.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.150-150
/
1999
재료의 광학적 특성을 변화시키기 위한 표면 코팅의 사용을 잘 알려져 있다. 그리고 이러한 광학 코팅은 우리가 주위에서 볼 수 있는 렌즈에서부터 레이저반사경 다 나아가 다양한 광학 필터에 이르기까지 빛의 간섭을 이용한 광학 박막의 코팅은 폭넓게 이용되고 있다. 그러한 응용가운데 불필요한 표면 반사를 방지함으로써 전체 투과율을 강화시키기 위한 무반사(Anti-Reflection) 코팅은 오늘날 광대역 무반사 특성 등 다양한 광학적 요구에 따라 하나 또는 그 이상의 층을 형성함으로써 극적으로 성취할 수 있다. 본 실험은 기존 많이 활용되는 증발법 그리고 스퍼터링 방법과는 달리 고진공하에서 증착 변수를 효과적으로 제어, 박막을 형성할 수 있는 자체 제작된 단일 IBS(Ion Beam Sputtering) 시스템을 이용하여 우수한 광학적 특성을 갖는 광학 재료로써 무반사용 다층박막 형성하기 앞서 MgF2, ZrO2 (yttria stabilized zirconia) 단층 박막을 제조하였으며, 각 증착 변수에 따른 결정학적 및 광학적 특성을 관찰하였다. 본 실험에 사용된 제조 장비로 Kaufman type 2.5inch의 이온 건이 장착된 Ion Beam sputtering 시스템으로 초기 진공도는 5$\times$10-6orr이며, 이온 빔의 전류 밀도는 Fareday cup을 이용했다. 6inch 크기의 ZrO2(yttria stabilized zirconia), MgF2 타겟트를 이용하여 Si(100), glass 기판위에 박막을 성장시켰다. 각 타겟트에 대한 증착변수로 이온 에너지, 기판온도, Ar 가스량을 변화시키면서 박막을 제조하였다. 제조된 박막의 광학적 특성으로 가시 영역에서 투과율의 변화는 자외/가시광선 분광 분석기 (UV/VIS specrophotometer)를 이용하여 측정했다. 그리고 박막의 조성 및 결정학적 구조는 AES EDS와 XRD로 확인하였다. 이온 빔 전압 500V, 빔 저류 55mA일 때 온도는 상온에서 30$0^{\circ}C$까지 승온 후 MgF2 박막의 XRD분석결과 우세한 결정성을 관찰할 수 없었으며, 이 때의 광 투과도는 가시영역에서 80~90%의 값으로 측정되었다. 추후 증착된 막의 결정성을 위해 열처리를 실시하고, 각 증착조건에 대한 결과는 학회 발표시 보고한다.
Park, Mijung;Kwon, Young Dae;Lee, Wang Jae;Kim, So Ra
Journal of Korean Ophthalmic Optics Society
/
v.19
no.2
/
pp.179-188
/
2014
Purpose: The present study was aimed to investigate the cleaning efficacy of multi-purpose solutions containing different types and content of surfactants and their effect on the visible light transmittance of soft lens. Methods: Soft lenses made of different materials (etafilcon A and hilafilcon B) were deposited tear proteins by using the artificial tear and then compared the resulting cleaning efficacy and visible light transmittance after cleaning the lens with 6 types of multi-purpose solutions containing different content of surfactants. Results: The cleaning efficacy of multi-purpose solutions was variously shown as approximately 23~43% according to the active concentration of surfactants and surface tension in multi-purpose solution when etafilcon A lens cleaned with rubbing. The highest cleaning efficacy was detected when cleaned with the multi-purpose solution containing hydrogen peroxide besides surfactant however, the amount of remaining protein was still high on the lens. After washed with multi-purpose solution, the visible light transmittance of lens was in 89.8 to 90.8%. The amount of protein deposited on hilafilcon B lens was very small compared with it on etafilcon A lens even though it was incubated in artificial tears for 7 days, which showed 5~10% of protein amount in etafilcon A lens and the decrease of visible light transmittance was also not significant. In case of rubbing with multi-purpose solution, the cleaning efficacy on hilafilcon B lens was in 45.4 to 67.4% however, the order of cleaning efficacy of multi-purpose solution was different from it on etafilcon A lens. The visible light transmittance of hilafilcon B lens has been restored to the level of new lens. Conclusions: From the result, it is concluded that the appropriate multi-purpose solution should be selected according to the lens material and the amount of protein deposit on the basis of understanding surfactants and active principle for proper care of protein deposit on soft lens and the cleaning with rubbing is more efficient for lens care regardless of manufacturer's guideline.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.10
no.6
/
pp.15-23
/
2011
Driving directly in front of the driver of a vehicle driving in front of the vehicle and it is commonly known is affected. Responding to the car in front of the driver and the vehicle in front, and these follow the model is known as Three-Car-Following Model. Platoon vehicles to follow behind the driver's visibility is affected by the a tinted vehicle, and Parameters of the model is estimated to be affected also. In this study, in Three-Car-Followng Model parameters were estimated. and the parameter values differ about whether and how analysis was performed by the level of Visible Light Transmission Percentage. RTK GPS receiving data through field experiment analyzed based on sensitivity of three car by Visible Light Transmission Percentage and ${\gamma}$. And With statistical verification of driving directly in front of the driver in front of the vehicle and that the moving vehicle is influenced also confirmed. Also Visible Light Transmission Percentage is lowered, the vehicle in front of the driver's behavior showed sensitive reactions. In the further need to research for influence analysis of traffic flow capacity by the level of VLT.
Tak, Seong-Geon;Kim, Jun-Yeong;O, Seok-Hyeon;Jeong, Min-Jae;Kim, Chun-Su;Jo, Sin-Ho
Proceedings of the Korean Vacuum Society Conference
/
2011.08a
/
pp.243-244
/
2011
최근에 산화물 반도체를 평판 디스플레이와 태양 전지의 투명 전극으로 응용하기 위해 많은 연구가 진행중에 있다. 특히, $In_2O_3$ 박막은 투명 전도 산화막으로써 3.7 eV의 직접 전이 밴드갭 에너지를 갖고 가시광 영역에서 높은 투과도를 갖는 반도체이어서 다양한 영역에서 응용 가능하다. 본 연구는 낮은 비저항과 높은 투과율을 갖는 최적의 투명 전도막을 성장시키기 위하여 라디오파 반응성 마그네트론 스퍼터링 방법을 사용하여 질소 도핑된 $In_2O_3$ 박막을 유리 기판 상부에 증착하였고, 후열처리로 온도 400, 450, 500, 550$^{\circ}C$에서 급속 열처리를 수행하여, 증착된 박막의 구조, 표면, 광학, 전기적 특성을 조사하였다. 증착된 박막은 XRD를 사용하여 구조적 특성을 조사한 결과, $2{\theta}=30.2^{\circ}$와 43.95$^{\circ}$에서 상대적으로 강한 피크가 관측되었다(Fig. 1). 전자는 (222)면에서 회절된 피크이며, 후자는 (100)면에서 발생한 회절 피크이다. 열처리 온도가 0$^{\circ}C$에서 500$^{\circ}C$로 증가함에 따라 (222) 면의 회절 신호의 세기는 상대적으로 증가하였고, 550$^{\circ}C$에서 급격하게 감소하였다. 박막의 광학적 특성은 자외선-가시광선 분광기를 사용하여 광학 흡수율과 투과율을 측정하였다(Fig. 2). 열처리를 하지 않은 박막의 경우에, 파장 200~1,100 nm 범위에서 측정된 평균투과율은 76%이었다. 광학 흡수 계수와 광자 에너지의 관계를 나타내는 포물선 관계식을 기초로 하여 광학 밴드갭 에너지를 계산하였다. 박막의 전기적 특성의 경우에, Hall 효과를 측정하여 전하 운반자 농도, 홀 이동도, 전기 비저항을 조사한 결과, 전기적 특성은 열처리 온도에 상당한 의존성을 나타냄을 알 수 있었고, 열처리 온도 500$^{\circ}C$에서 박막의 비저항값은 $4.0{\times}10^{-3}{\Omega}cm$이었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.