• Title/Summary/Keyword: 가스-액체

Search Result 592, Processing Time 0.025 seconds

해상구조물 안전을 위한 제한수역 설정에 관한 연구

  • Gang, Seok-Yong;An, Yeong-Jung;Lee, Yun-Seok
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2019.05a
    • /
    • pp.33-35
    • /
    • 2019
  • 해상구조물은 그 특성상 해상에서 고립되어 있고, 액체상태 또는 가스 상태의 탄화수소 등을 다루고 있어 사고발생시 대형사고로 이어질 가능성이 크다. 이에 해상구조물에는 유엔해양법협약에 따라 500m라는 넓이의 안전수역이 설정되어 있으며 추가로 설정되는 제한 수역은 명확한 근거 없이 상이한 넓이로 설정되어 있다. 이에 본 연구에서는 선박의 조종성능 및 해상구조물에서 다루는 화물의 고유한 위험특성을 파악하여 표준화된 안전수역을 설정하는 방안을 제시하고자 한다. 이에는 국제해사기구의 조종성능기준인 선회경의 크기제한, 초기선회성능, 정지성능 등이 있다. 본 연구는 정량화된 안전수역 및 제한수역 설정 등에 대한 기준을 제시하는 데 도움을 줄 수 있을 것으로 사료된다.

  • PDF

Research of Cryogenic Helium Refrigerator System for SQUID (SQUID 냉각장치용 극저온 시스템 개발)

  • Lee, Kum-Bae;Baek, Il-Hyun
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.18 no.2
    • /
    • pp.121-129
    • /
    • 1989
  • 헬륨을 이용한 극저온 냉동기는 압축기(compressor)을 통하여 압력을 10-20 기압 정도로 높혀준후 여러 단계의 열교환기(heat exchanger)를 통하여 상전위온도(maximum inversion temperature) 이하로 떨어뜨린후 Joule-Thomson 밸브를 통하면 4K까지 온도가 떨어진다. 이때 압력은 1기압 정도이며 헬륨가스는 액체로 변한다. 본 연구의 목적은 Gifford-McMahon 냉동기와 Joule-Thomson 냉동기의 혼합형인 극저온 냉동기를 설계, 제작하여 죠셉슨(Josephson) 소자를 이용한 SQUID(초전도양자 간섭장치), 여러 종류의 탐지기, 컴퓨터 소자 개발 등을 위한 냉동기로 사용하는데 그 목적이 있다. 개발되는 법동기의 용량은 1 W이며, 최저온도는 4K 정도가 된다.

  • PDF

Study of the Fire Risk Caused by the Use of a Bimetal type Thermometer in the Drying Equipment (바이메탈식 온도센서를 적용한 건조설비에서의 화재 위험성 연구)

  • Park, Nam-Kyu;Kim, Jin-Pyo;Nam, Jung-Woo;Park, Jong-Taek;Song, Jae-Yong
    • Fire Science and Engineering
    • /
    • v.31 no.3
    • /
    • pp.73-78
    • /
    • 2017
  • In this paper, the fire risk using a bimetal type thermometer for construction installation is presented. Because construction equipment is used widely in the field and the site is exposed to explosions and fire by combustible gas or fume, strong restrictions on the structure and usage are applied. Moreover, the risk of fire increases as precise temperature measurements are poorly conducted via an inner temperature sensor inside construction furnace. Therefore, this paper presents the results of structural analysis of a bimetal temperature sensor which is used widely in construction installation and temperature measurement experiments relative to the material property of the target object. The results revealed the relatively precise temperature of the liquid object, whereas those of the gas and solid object showed a lower temperature compared to the real temperature. This shows that bimetal-type temperature sensor is more suitable for measuring a liquid state object than measuring a gas or solid state object.

Numerical Analysis of Nonlinear Longitudinal Combustion Instability in LRE Using Pressure-Sensitive Time-Lag Hypothesis (시간지연 모델을 이용한 액체로켓엔진의 축방향 비선형 연소불안정 해석)

  • Kim Seong-Ku;Choi Hwan Seok;Park Tae Seon;Kim Yong-Mo
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • v.y2005m4
    • /
    • pp.281-287
    • /
    • 2005
  • Nonlinear behaviors such as steep-fronted wave motions and a finite amplitude limit cycle often accompanying combustion instabilities have been numerically investigated using a characteristic-based approximate Riemann solver and the well-known ${\eta}-{\tau}$ model. A resonant pipe initially subjected to a harmonic pressure disturbance described the natural steepening process that leads to a shocked N-wave. For a linearly unstable regime, pressure oscillations reach a limit cycle which is independent of the characteristics of the initial disturbances and depends only on combustion parameters and operating conditions. For the 1.5 MW gas generator under development in KARI, the numerical results show good agreement with experimental data from hot-firing tests.

  • PDF

Design of Full-Scale Combustion Chamber of Liquid Rocket Engine for Ground Hot Firing Tests (지상연소시험용 실물형 고압 연소기의 설계)

  • Han Yeoungmin;Kim Seunghan;Seo Seonghyeon;Cho Wonkook;Choi Hwanseok;Seol Wooseok;Lee Sooyong
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • v.y2005m4
    • /
    • pp.299-304
    • /
    • 2005
  • The design procedures of full-scale combustion chamber with chamber pressure of 53bara, mass flow rate of 90kg/s, combustion efficiency of $94\%$ and specific impulse at ground of 253sec were described. The details of combustion performance and geometrical parameters were also given. Full-scale combustion chamber consists of the combustor head with injector/baffle and the chamber/nozzle with regenerative cooling channels. The design results of combustion chamber with ablative materials, detachable injector head with SUS baffle or baffle injector and chamber body for ground hot firing tests were given in this paper.

  • PDF

Porduction and Enzymatic Characteristics of ${\alpha}-Galactosidase$ from Aspergillus niger (Aspergillus niger에 의한 ${\alpha}-Galactosidase$의 생산 및 효소적 특성)

  • Chun, Hyang-Sook;Lee, Su-Rae
    • Korean Journal of Food Science and Technology
    • /
    • v.20 no.1
    • /
    • pp.79-84
    • /
    • 1988
  • ${\alpha}$-Galactosidase from Aspergillus niger as a possible enzyme for removal of flatulence factors in soybean foods was produced the highest in 120 hours in either Czapeck-Dox liquid medium or wheat bran solid medium. The most efficient carbon and nitrogen sources in Czapeck-Dox medium were raffinose and sodium nitrate, respectively, whereas the addition of the sources showed negative effects in wheat bran. pH optima for enzyme activity and stability were 4.0-5.0 and 3.5-6.5, respectively, and optimum temperature for stability was $40-50^{\circ}C$. Upon reaction on p-nitrophenyl-${\alpha}$-D-galactoside, Michaelis constant was 0.42 mM and maximum velocity was 152 ${\mu}moles$ substrate/minute/kg solid medium. Mercuric chloride acted as a strong noncompetitive inhibitor and p-chloromercuribenzoate, even in low concentration, acted as a competitive inhibitor. Crude ${\alpha}$-galactosidase hydrolyzed raffinose and stachyose completely, giving spots of monosaccharides only on thin-layer chromatogram.

  • PDF

CFD Analysis on the Flow Characteristics of Ejector According to the Position Changes of Driving Nozzle for F.W.G (수치해석을 이용한 담수장치용 이젝터의 노즐위치 변화에 따른 이젝터 유동특성 연구)

  • Joo, Hong-Jin;Jung, Il-Young;Yun, Sang-Kook;Kwak, Hee-Youl
    • Journal of the Korean Solar Energy Society
    • /
    • v.31 no.3
    • /
    • pp.23-28
    • /
    • 2011
  • In this study, the ejector design was modeled using Fluent 6.3 of FVM(Finite Volume Method) CFD(Computational Fluid Dynamics) techniques to resolve the flow dynamics in the ejector. A vacuum system with the ejector has been widely used because of its simple construction and easy maintenance. Ejector is the main part of the desalination system, of which designs determine the efficiency of system. The effects of the ejector was investigated geometry and the operating conditions in the hydraulic characteristics. The ejector consists mainly of a nozzle, suction chamber, mixing tube (throat), diffuser and draft tube. Liquid is supplied to the ejector nozzle, the fast liquid jet produced by the nozzle entrains and the non condensable gas was sucked into the mixing tube. The multiphase CFD modeling was carried out to determine the hydrodynamic characteristics of seawater-air ejector. Condition of the simulation was varied in entrance mass flow rate (1kg/s, 1.5kg/s, 2kg/s, 2.5kg/s, 3kg/s), and position of driving nozzle was located from the central axis of the suction at -10mm, 0mm, 10mm, 20mm, 30mm.. Asaresult, suction flow velocity has the highest value in central axis of the suction.

Preparation of PVDF Hollow Fiber Membrane and Absorption of SO2 from Flue Gas Using Bench Scale Gas-Liquid Contactor (PVDF 중공사막 제조 및 벤치규모 기-액 접촉기를 이용한 SO2 흡수특성)

  • Park, Hyun-Hee;Jo, Hang-Dae;Kim, In-Won;Lee, Hyung-Keun
    • Korean Chemical Engineering Research
    • /
    • v.46 no.3
    • /
    • pp.521-528
    • /
    • 2008
  • The micro-porous asymmetric PVDF hollow fiber membranes for gas-liquid contactor were prepared by the dry-jet wet phase inversion process and the characteristics of hollow fiber membranes were evaluated by the gas permeation method and scanning electron microscope. The chemical absorbent for removal of $SO_2$ gas was sodium hydroxide at bench scale hollow fiber membrane contactor. The experiments were performed in a counter-current mode of operation with gas in the shell side and liquid in the fiber lumen of the module to examine the effect of various operating variables such as concentration of absorbent, gas flow rate, L/G ratio and concentration of inlet $SO_2$ gas on the $SO_2$ removal efficiency using PVDF hollow fiber membrane contactor. Membrane mass transfer coefficient($k_m$) was calculated by mathematical modeling. The volumetric overall mass transfer coefficient increased with increasing the concentration of absorbent and L/G ratio. The increase of the absorbent concentration and L/G ratio not only provides more sufficient alkalinity but also decreases liquid phase resistance. The volumetric overall mass transfer coefficient increased with increasing gas flow rate due to decreasing the gas phase resistance.

Effects Of the Inoculation Of Candida rugosa CY-10 OH the Reducing Odours in Pig Slurry Medium (Candida rugosa CY-10의 접종에 따른 돈분배양액내 악취저감 효과에 관한 연구)

  • 김민균;김태일;정광화;강기효;곽정훈;유용희
    • Journal of Animal Environmental Science
    • /
    • v.8 no.1
    • /
    • pp.17-24
    • /
    • 2002
  • This study was carried out to isolate and identify the yeasts from the the composts, which were effective to reduce odor of the pig feces, and to investigate their physiological properties. In yeasts, one of 30 isolates was obtained on 10% pig feces extract medium. Judging from the morphological and biochemical characteristics, the CY-10 isolated from the compost were identified as Candida rugosa. This isolated strain showed the deodorizing activity by reducing the concentration of $NH_3$ and R-$NH_2$ than that of the control. The CY-10 had completely utilizing butyric acid and iso-butyric acid including 10% pig slurry of the volatile fatty acids, which are the specific malodorous agents of pig feces. Compared to control, this yeast was found effective for decrease in $NH_4$-N, Soluble-N and BOD, 20%, 12.6%, and 9.82% respectively.

  • PDF

Surgical Correction of Chronic Hypertropic Pyloric Gastropathy in a Dog (개에서의 만성 비후성 유문 위장애에 대한 수술적 치료)

  • Kim Joon-young;Jeong Soon-wuk;Park Sang-heuk;Yoon Hun-young;Han Hyun-jung;Jang Ha-young;Lee Bo-ra;Kim Gu-yuong
    • Journal of Veterinary Clinics
    • /
    • v.21 no.4
    • /
    • pp.398-401
    • /
    • 2004
  • A ten-year-old, female Yorkshire terrier dog with intermittent vomiting, weight loss, polydipsia and depression was referred to the Veterinary Medical Teaching Hospital of Konkuk University. On the radiological survey, gas and fluid-filled gastric distention was detected. No contrast medium entraneed to the small bowel, in 60 minutes after contrast medium administration. And marked fluid accumulation in gastric body and thickening of the pyloric mucosa were found with ultrasonograph. So gastric obstruction by reason of pyloric stenosis was strongly suspected. At the surgery, hypertrophied mucosa was resected adequately, and Heineke-Mikulicz pyloroplasty was applied. Microscopically the symptom was characterized by gastric mucosa hyperplasia and mild diffuse Iymphoplasmocytic gastritis. So this condition was diagnosed as chronic hypertrophic pyloric gastropathy. Intermittent vomiting and mild depression were shown for 9 days after the operation. After that, the patient was recovered gradually. One month later, the patient had normal appetite and activity without complications.