• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.28-28
• /
• 1999

본 연구에서는 가스 발생기에서 발생되는 고온, 고압의 가스를 이용하여 유도탄을 수직 발사하는 사출 시스템에 대해 해석적 연구를 수행하였다. 사출 시스템에 의한 수직발사 방식은 발사관내에 설치된 가스 발생기에 의해 생성된 가스가 사출 실린더의 피스톤을 구동시켜, 피스톤에 연결된 유도탄을 요구되는 높이로 사출 시킨 후 유도탄이 점화되는 발사방식이다. 이러한 발사방식은 유도탄 자체의 부스터 발사방식에 비해 유도탄의 화염에 의한 영향이 적다. 현재 사출 시스템은 가스발생기, 가스 튜브, 사출 실린더와 피스톤으로 구성되어있다. 본 논문은 가스 발생기에서 사출 실린더까지의 내부 유동장을 일차원적으로 모델링하였고, 가스발생기, 가스튜브, 실런더 내의 유동과 열전달 과정 및 유도탄의 동적거동에 대한 미분방정식을 연립하여 4th-order Runge-Kutta 방법으로 계산하였다. 또한 가스튜브와 사출 실린더의 열전달 손실에 대하여 1차원 비정상 열전도 방정식의 수치적 계산을 통해 에너지 손실을 계산하였다. 특히 해석에 사용된 작동유체인 추진제 가스의 열학적 상태량은 온도 함수의 5차 다항식으로 표현하여 사용하였다. 이론적인 해석을 통해 사출 장치 시스템의 성능 요구조건과 신뢰성을 만족시키기 위한 가스발생기의 추진제 그레인 및 사출 시스템 설 계 조건을 도출하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.125-128
• /
• 2008

As a interstage of the 30tonf level LOx/kerosene liquid rocket engine development, turbopump-gas generator open-loop coupled tests are performed. Test schematic and test results of open-loop coupled tests are presented. In engine system operation environment simulating combustion chamber by flow control orifice, chill-down procedure, startup characteristics, nominal operability of turbopump+gas generator open-loop coupled Test Plant are confirmed The results of open-loop coupled test were used for the preparation on turbopump+gas generator closed-loop test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.198-202
• /
• 2005

Gas generator is the equipment to produce high enthalpy gas used to generate sufficient power to operate turbine and pump system for propellant feeding in liquid rocket engine. Since the limit in operating temperature is imposed due to turbine blade, the gas generator has to be operated at the temperature far below stoichiometric maintaining fuel rich combustion. In this research, fundamental study was performed to understand the non-equilibrium combustion process with in-house code and CFD-ACE as well.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.129-132
• /
• 2008

For the development of the 30tonf level LOx/kerosene liquid rocket engine, turbopump-gas generator closed-loop coupled tests are performed. To simulate engine operation conditions, combustion chamber was substituted by flow control orifices. In simulated engine system operation environment, chill-down procedure, startup characteristics, nominal operability of turbopump+gas generator coupled Test Plant are confirmed. Turbopump and gas generator are confirmed to operate well in simulated engine environment. The control system for regulating power and mixture ratio of Test Plant are also successfully confirmed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.30-30
• /
• 2000

액체로켓엔진의 단일추진제 가스발생기는 연료공급 시스템의 터보펌프를 구동시키기 위한 작동가스 생성을 목적으로 사용된다. 고체추진제 가스발생기와 비교할 경우 작동시간이 보다 길고 연소생성물에 의한 터빈 블레이드의 삭마가 없으며 제어가 용이하므로 초기 액체로켓엔진 개발시부터 사용되어 왔다. 80년대 이후 개발된 액체로켓엔진은 이원추진제 가스발생기 또는 연소가스 FEEDBACK 시스템을 채용하고 있지만 단일추진제 가스발생기는 과산화수소수 또는 하이드라진과 같은 별도의 추진제 공급 시스템을 필요로 하는 단점에도 불구하고 상대적으로 낮은 온도의 무연 작동 가스를 발생하므로 가스발생기 자체를 위한 냉각시스템을 제거 또는 최소화 시켜 간단한 구조로 전체 시스템 설계를 가능하게 하므로 중소형 액체로켓엔진에 사용되고 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.1
• /
• pp.43-50
• /
• 2009

The characteristics at the intermediate operation point of the turbopump-gas generator(TP-GG) coupled test were investigated by analytical method. The pump outlet pressure, gas generator mixture ratio, gas generator pressure, and temperature were examined considering risk minimization of test. The engine system shows different behavior from the TP-GG coupled test at the intermediate operation point since the combustion pressure feeds back to the flow rate in the lines. The advanced valve changes in the combustor line helps less risky mode transition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.91-96
• /
• 2004

An optimal design of the gas generator for Liquid Rocket Engine (LRE) was conducted. A fuel-rich gas generator in open cycle turbopump system was designed for 10ton in thrust with RP-1/LOx propellant. The optimal design was done for maximizing specific impulse of thrust chamber with constraints of combustion temperature and for matching the power requirement of turbopump system. Design variables are total mass flow rate to gas generator, O/F ratio in gas generator, turbine injection angle, partial admission ratio, and turbine rotational speed. Results of optimal design provide length, diameter, and contraction ratio of gas generator. And the operational condition predicted by design code with resulting configuration was found to maximize the objective function and to meet the design constraints. The results of optimal design will be tested and verified with combustion experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.593-600
• /
• 2015

In this study, a combined hybrid rocket system is newly introduced which has characteristics of both gas generators and afterburner type hybrid rockets. In particular, a combined gas generator utilizing solid fuel and liquid/gas oxidizer was designed as a primary combustor of the system. Combustion tests were carried out with various equivalence ratio affected by parameters such as fuel length, oxidizer flow rate, fuel port diameter and fuel type. In general, fuel-rich gas generator produces low combustion gas temperature to meet the temperature requirement and the target temperature was transiently set less than 1600 K. Since it was found that controlling parameters showed limited effects on the change of equivalence ratio, mixture of $O_2$ and $N_2$ as an oxidizer was additionally introduced. As a result, a combined gas generator successfully produced combustion gas temperature of less than 1600 K Future studies will carry out more combustion tests to attain fuel-rich combustion gas temperature less than 1200 K, which was a temperature requirement of a gas generator system in the previous studies.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.563-568
• /
• 2010

Turbopump-gas generator open-loop coupled tests are performed during the development of a 30tonf-LOx/Kerosene rocket engine. In the turbopump-gas generator open-loop tests, the propellants to gas generator are supplied from the outlets of turbopump, while the gas exhausted from the gas generator is vented out to the atmosphere, instead of being used to turbine driving. This paper presents the objectives, procedure, and results of the open-loop coupled test, in addition to a schematic representation of the test apparatus and the operating conditions for the test facility system and control system. The results of turbopump-gas generator open-loop coupled test confirm chill-down procedure, startup characteristics, nominal operability and smooth shutdown of the open-loop coupled Test Plant in test conditions simulating engine system operation environment.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.128-135
• /
• 2007

Combustion characteristics of full-scale gas generators were studied experimentally by changing the injector number installed at the injector head. Three full-scale gas generators were utilized; they have same total mass flow rate but mass flow rates per injector are different. Thirteen, nineteen and thirty seven injectors, which have internal-mixing and double-swirl characteristics, are distributed in injector heads, respectively. The results showed that pressure fluctuations in the gas generators with 13 and 19 injectors didn't occur around longitudinal resonant frequency, however longitudinal-mode pressure fluctuation appeared slightly in the gas generator with 37 injectors. As the number of injectors increased, deviations of temperature distribution in the combustion chamber decreased gradually, but the damage of injector LOx posts became a little severe.