• Title/Summary/Keyword: 가스혼합물

Search Result 165, Processing Time 0.028 seconds

Performance Characteristics of Matured Compost Biofiltration of Ammonia Gas from the Agitated Composting (교반식 퇴비화 암모니아가스의 부숙퇴비를 이용한 탈취성능 특성)

  • 홍지형;박금주
    • Journal of Animal Environmental Science
    • /
    • v.8 no.1
    • /
    • pp.1-8
    • /
    • 2002
  • Real sized open type biofilter system was manufactured to control the odor generated from the agitated composting system which composted swine manure and sawdust mixtures. The aim of this research was to develop a biofilter system using matured compost and to evaluate the performance of the biofilter system. Average ammonia reduction rate through the biofilter was 84% during about two month period of composting. The maximum ammonia concentration after filtering was 45ppm lower than allowable value of 50ppm. It was concluded that compost can be used as a biofilter materials.

  • PDF

Development of LPG hot air heater for greenhouse heating (간접열식 LPG온풍난방기 개발)

  • 김영중;유영선;장진택;이건중
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1999.07a
    • /
    • pp.313-319
    • /
    • 1999
  • 간접열식 LPG온풍난방기는 LP(Liquefied Petroleum)가스를 열원으로 한 온풍난방기를 말한다. LP가스는 프로판(Propane, $C_3$H$_{8}$)과 부탄(Butane, $C_4$H$_{10}$)을 주성분으로 하는 혼합물로 에탄, 프로필렌, 부틸렌 등이 약간 포함되어 있는 기체로 액화 및 기화가 쉬우며 기체상태에서는 비중이 공기보다 무겁고 액체상태에서는 물보다 가볍다. 또한, 기화할 때는 다량의 열과 연소시 많은 공기를 필요로 하고 온도에 따라 액체의 부피가 변하는 특성을 가지고 있으며 무색, 무취, 무독하다. LP가스의 발열량은 12,000kcal/kg으로 경유나 보일러등유 보다 약 30% 정도 높아 난방연료로서의 사용 및 취급성이 우수하다. (중략)

  • PDF

A Study on Permselectivity of Adsorbent-filled PDMS Membranes for Fermentation Gas (흡착제 함유 PDMS 막의 발효가스 투과선택성 연구)

  • 김태곤;김민정;염경호
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1996.10a
    • /
    • pp.47-48
    • /
    • 1996
  • 최근 고분자 분리막을 이용한 기체 혼합물의 분리시 분리특성을 향상시키고자 하는 연구가 활발히 진행되고 있다. 그러나 고분자 막에 의해 기체를 분리할 경우 기체의 투과도와 선택도는 상반된 특성을 갖고 있어 투과도와 선택도 모두를 동시에 증가시키기 위한 분리막 소재의 개발 및 개선이 요구되며, 많은 연구자들이 이에 관련된 연구들을 수행하고 있다. 본 연구에서는 다양한 종류의 흡착제가 함유된 불균일상 기체분리막을 제조하여, 이막의 흡착제 함유량 변화에 따른 기체 투과성 및 발효가스중 특정성분 기체의 선택특성을 연구하였다. 본 연구는 김치를 포함한 우리나라 전통 식품의 밀폐포장내에서 발생되는 발효가스를 효율적으로 제거 또는 방출하기 위한 포장재 개발 연구에 대한 기초 연구로서 수행되었다.

  • PDF

A comparison of predicted VLE of LNG mixtures containing $H_2S$ by use of Cubic and Noncubic EOS ($H_2S$를 포함하는 LNG 혼합물에 대한 Cubic과 Noncubic 상태방정식의 예측 비교)

  • Choi Eunjoo;Lee Taejong
    • Journal of the Korean Institute of Gas
    • /
    • v.4 no.4 s.12
    • /
    • pp.1-5
    • /
    • 2000
  • Cubic and non-cubic equations of state are used to calculate the vapor-liquid equilibrium(VLE) compositions for liquified natural gas(LNG) containing hydrogen sulfide. Modified Benedict-Web-Robin EOS is chosen as a non-cubic equation of state while Peng-Robinson, Soave-Redlich-Kwong EOS are used for a cubic EOS. Modified Benedict-Web-Robin EOS. showed better predictability than the cubic EOS used for the systems $H_2S/CH_4,\;H_2S/iC_4H_{10},\;H_2S/N_2$. specially for liquid composition.

  • PDF

Emission Evaluation of Emulsion Fuel Prepared from Bunker C Oil (벙커 C유를 사용한 에멀젼 연료유의 배기가스 특성)

  • Lim, HeungKyoon;Lee, MyungJin;Chi, Gyeong-Yup;Lim, JongChoo
    • Applied Chemistry for Engineering
    • /
    • v.28 no.2
    • /
    • pp.186-192
    • /
    • 2017
  • In this study, water in oil (W/O) emulsion fuel was prepared with surfactant mixture of OIMS90 and NP12 by varying ratio of water to bunker-C oil, surfactant concentration and composition, emulsification time, stirring intensity, temperature and mixing time. Diesel engine performance and exhaust emissions were measured and analyzed with prepared emulsified fuel and compared with those measured using bunker Coil. The results indicated that bunker C emulsion fuel stabilized by surfactant mixture of OIMS90 and NP12 is efficient in reducing emissions of particulate matter, $NO_2$, CO, $CO_2$ and $SO_2$. The biggest reduction in exhaust emission was achieved by using emulsion fuel prepared by OIMS90/NP12 = 4 : 6, 500 ppm of total surfactant concentration and 10% water content at $80^{\circ}C$. Boiler efficiency test measured with emulsion fuel showed excellent energy efficiency compared with bunker C oil.

Study on the Convergency Improvement Method for the Saturation-Property Calculation of Multi-Component Hydrocarbon Systems (다성분 탄화수소혼합물 포화물성해석 수렴도 향상 연구)

  • Shin, Chang-Hoon;An, Seung-Hee;Lee, Jeong-Hwan;Sung, Won-Mo
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.10
    • /
    • pp.947-955
    • /
    • 2010
  • Most oil and gas reservoirs, which have some light hydrocarbon components, show sensitive phase behavior in response to changes in the composition of the internal fluid. When evaluating and developing plans for oil and gas fields, flash calculation, PVT analysis, and saturation-property calculation are necessary for analyzing reservoir characteristics and pipeline flows. In general, the determination of saturation properties such as dew point and bubble point is considered a difficult task because of the poor convergence of the calculation methods. In this study, several new initial-value-guessing methods and root-finding methods are proposed; parametric analysis were carried out to verify the improvement in convergence. Finally, these new ideas and methods were successfully applied to the new GUI based multi-phase behavior simulator.

Hydrogenation Study of Mg-based Alloys by mechanical Grinding Reaction for Hydrogen Storage of Fuel Cell (연료전지의 수소저장용 마그네슘계 합금의 기계적 분쇄 반응에 의한 수소화 특성 평가)

  • Kim, Ho-Sung;Suh, Hee-Seok;Cha, Jae-Sang
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.20 no.6
    • /
    • pp.69-74
    • /
    • 2006
  • The effects of mechanical grinding(MG) treatment on the hydrogen storage of $Mg_2Ni$ alloy and $Mg_2Ni$ composite alloy($Mg_2Ni+graphite$) were investigated by pressure-composition-temperature(PCT) measurement, the micro-electrode technique of electrochemistry and etc, in which PCT was measured at high temperature(around $300[^{\circ}C]$) of gas phase and a carbon-filament micro-electrode for electrochemical evaluation was manipulated to make electrical contact with the particle in 1M KOH aqueous solution. It was found that the hydrogenation properties of $Mg_2Ni$ and graphite composite particle were greatly improved by the mechanical grinding treatment by which the $Mg_2Ni$ and graphite composite alloys could be changed into microstructure and nano-level particles. namely; the hydrogen dissociation pressure of PCT measurement was decreased from 0.55[MPa] to 0.42[MPa] and hydrogenation peaks by micro-electrode were also observed more clearly on the same sample.

Calculation of the TNT Equivalent Mass of the Possible Explosion of CO, CH4, and C2H4 (CO와 CH4, C2H4 혼합 가스 폭발에 대한 TNT 등가량 계산)

  • Kim, Minju;Kwon, Sangki
    • Explosives and Blasting
    • /
    • v.38 no.1
    • /
    • pp.1-13
    • /
    • 2020
  • Gas explosion accidents are steadily being issued due to increased gas consumption in Korea and foreign countries. To analyze the effects of these gas explosions, a TNT equivalent method is used. In this study, the TNT equivalent was calculated in the event of an explosion due to the volume content in the air of CO, CH4 and C2H4, the typical flammable gases emitted by coal. Also, the peak overpressure and impulse variation with the distance from explosion point were compared and analyzed by gas using the calculated equivalent value of TNT. The upper limit of the TNT equivalent for the three mixed gases is up to five times larger than the other gases mixture. In addition, the peak overpressure and impulse, which are factors of the TNT characteristic curve, are also increasing as the number of gases increases.

Numerical Investigation of Deformation of Thin-walled Tube Under Detonation of Combustible Gas Mixture (가연성 연소 가스의 데토네이션에 의한 얇은 관 변형 모델링)

  • Gwak, Mincheol;Lee, Younghun;Yoh, Jai-Ick
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.39 no.1
    • /
    • pp.11-19
    • /
    • 2015
  • We present the results of a multi-material numerical investigation of the propagation of a combustible gas mixture detonation in narrow metal tubes. We use an experimentally tuned one step Arrhenius chemical reaction and ideal gas equation of state (EOS) to describe stoichiometric $H_2-O_2$ and $C_2H_4-O_2$ detonations. The purely plastic deformations of copper and steel tubes are modeled using the Mie-Gruneisen EOS and Johnson-Cook strength model. To precisely track the interface motion between the detonating gas and the deforming wall, we use the hybrid particle level-sets within the ghost fluid framework. The calculated results are validated against the experimental data because the results explain the process of the generation and subsequent interaction of the expansion wave with the high-strain-rate deformation of the walls.

Liquefaction Characteristics of Polyethylene-Polypropylene Mixture by Pyrolysis at Low Temperature (Polyethylene-Polypropylene 혼합물의 저온 열분해에 의한 액화특성)

  • Cho, Sung-Hyun;Choi, Hong-Jun;Na, Byung-Ki;Lee, Bong-Hee
    • Clean Technology
    • /
    • v.15 no.2
    • /
    • pp.109-115
    • /
    • 2009
  • The low temperature pyrolysis of polyethylene (PE), polypropylene (PP) and polyethylene-polypropylene (PE-PP) mixture in a batch reactor at the atmospheric pressure and $450^{\circ}C$ was carried out to investigate the synergy effect of PE-PP mixture. The pyrolysis time was from 20 to 80 mins. The products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of Korea Institute of Petroleum Quality. The analysis of the product oils by GC/MS showed that no new component was detected and no synergy effect was made by mixing of PE and PP. Conversions and yields of PE-PP mixtures were linearly dependent on the mixing ratio of samples.