• Resources Recycling
• /
• v.21 no.4
• /
• pp.53-59
• /
• 2012

In this study, behaviors of removing Sb and Pb by oxidation of molten Bi-Pb-Sb alloy which is a by-product of non-ferrous smelting process was investigated. The molten alloy was oxidized at 1173 K by bubbling $N_2+O_2$ gas through a submerged nozzle. The Sb was removed and recovered as mixed phase of $Sb_2O_3$ and metal Sb. In the case of bubbling $N_2+O_2$ gas into molten Bi-Pb alloy at 923 K, Pb was oxidized and removed to slag. But Bi could not be refined due to simultaneous oxidization of Bi with Pb.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.15-17
• /
• 2004

철강재의 산소절단은 연료가스의 연소열 및 철의 산화 반응열을 이용하여 강재를 절단하는 방법이다. 연료가스의 연소열을 이용하여 강재를 가열 및 용융시키고, 여기에 고순도의 산소를 취입하면 강재의 용융물질 중 철의 급격한 산화반응이 발생된다. (중략)

• Resources Recycling
• /
• v.7 no.2
• /
• pp.16-22
• /
• 1998

Recently, the new technology for the recycling of waste plastics as an alternative he1 of blast furnace ha been developed. In this shldy, the test of plastics injection into a tuyere af the foundry blast furnace were carried out. The injection rate of plastics far this tcst facility war expressed as follows, ${W}_{s}=0.265\frac{{delta}PA}{U}_{g}$, where. Ws, AP, A and Ug are plastic conveying ratc (kgisec), pressure drop between feed hopper and blaqt pressure (alm), cross sectional area of conveying pipe (mi) and superficial velocity of transport air (mhzc) respcctiuely. From the results of semi-continuous test operation during 96 hours, the replacement raho mned out to be 1.38 according to the injection rate of 6. 4 kg-plasticsit-p. With increasing the rate of plaslics injcchon, the content of hydrogen in top gas became increased and the brick temperahlre at bzlly was also increased due to Lhe changes ot the combustion zone shape.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.23-30
• /
• 2000

Since most of the waste plastics are incinerated and landfilled for the plastic treatment, the environmental friendly processes must be introduced. The plastic utilization of plastic to the blast furnace as a substitutional fuel was developed as a useful recycling method of waste plastics, and commercialized in several ironmaking company in Europe and Japan. Present study was carried out to understand the effect of plastic injection on blast furnace process continuously by using the foundry blast furnace in POSCO. The coke replacement ratio turned out to be 0.98 with the waste plastic injection up to 13.8 kg/thm of injection rate, and there were no significant effect of the kinds of injection plastics on the replacement ratio in this test operation. The permeability in the furnace became worse and the heat load in the lower part of blast furnace was increased with increasing the injection rate of waste plastics. As the rate of plastic injection were increased, the top gas utilization and shaft efficiency were also decreased from the Rist diagram analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4713-4716
• /
• 2014

Several methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals, and the input method that supplies argon and nitrogen, or chlorine gas using a gas blow-tube. On the other hand, these methods have some problems, and it is a difficult process to handle pollution due to the production of considerable toxic gases, such as chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are most fatal are the production of considerable sludge due to a reaction of aluminum molten metal with chemicals, loss of metals, and the decreasing life of refractory materials. To solve these problems, this study developed a technology that is related to continuous casting of molten aluminum metal and monolithic degasing apparatus.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.18-24
• /
• 2022

Dry reduction using natural gas was proposed to recover tin from waste tin oxide generated in a tin bath that was used for controlling the smoothness of architectural glass during production, and the reduction behavior was investigated. The utilized vertical natural gas dry reduction system is capable to process 4 L or 20 kg depending on input raw materials. The system was established by applying the upper intake and lower discharge method. The recovery rate was 97.2% at 800 ℃ and 4 sccm flow rate and increased with the amount of input gas. Hydrogen accounted for 23% of the discharge gas, showing a 16.6% hydrogen conversion rate. The reaction behavior of tin recovered via natural gas reduction provides basic data on the new waste resource reduction/recovery technology.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.3-12
• /
• 2010

Platinum group metals with high purity are important raw materials for high technology industry. Since there are no domestic ores containing PGMs, it is of importance to develop a separation process by which ultra pure PGMs can be recovered from diverse spent resources. Data on the chemical properties and dissolution behavior of PGMs were obtained from the literature. A method for the thermodynamic analysis of the HCl solution with chlorine gas was introduced. Utilizing the difference in the chemical properties and dissolution behavior of PGMs would lead to an efficient separation process to recover ultra pure PGMs.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.36-44
• /
• 2003

The present work relates to the recovery of dissolved Mo from spent mandrel dissolving acid solution by injecting ammonia gas. In order to optimize the process parameters for high yield and high purity of recovered Mo products, a bench scale and a pilot scale experiments were carried out. As a result, more than 99.5% of Mo in spent acid was recovered in the form of ammonium molybdate(4MoO$_3$.$2NH_3$.$H_2$O). The purity of Mo products recovered was higher than 99.5%. In addition, the mother liquor, residual solution after precipitation and filtration of ammonium molybdate solid particles, could be utilized as fertilizers.

• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.68-74
• /
• 2002

The lead has to be removed for the recycling of copper alloy. The lead cannot be removed from the copper alloy by oxidation. It can be removed by the evaporation because of its high vapor pressure. However, rare information is found on removal of lead from copper alloy. The purpose of present work is to provide a fundamental knowledges on the removal of lead from the copper alloy by evaporation. Gas injection was made in molten copper alloy, and the evaporation rate of lead was measured. The influence of Ar gas flow rata(2~4 L/min), initial contents of lead(2~4wt%Pb), temperature(1200~140$0^{\circ}C$) was investigated based on the thermodynamic and the kinetics. The rate constant is increased with increasing flow rate of Ar and temperature. Though amount of lead removed is increased with higher initial lead concentration, the rate constant is not changed significantly. The activation energy is estimated from the temperature dependence of the rate constant. Also removal of lead from the copper by adding chloride was made for the comparison.

• Korean Journal of Materials Research
• /
• v.2 no.6
• /
• pp.436-442
• /
• 1992

When $N_2$was used as shielding gas during the formation of Ti surface-alloyed layer by irradiation of $CO_2$laser beam on steel, TiN and F$e_2$Ti were formed regardness of carbon-content in steel. When Ti content was increased in low carbon-content steel, formation of martensitic structure was suppressed due to increase of critical cooling rate for martensitic transformation. In case of high-carbon steel, even though Ti content was about 1.5% in alloyed layer, hardness was increased by formation of martensitic structure instead of ferrite. In addition to that structure, hardness was incrreased further by precipitation of TiC in Ti alloyed-layer of high carbon-steel.