• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.432-440
• /
• 2015

Biochar, a by-product from pyrolysis of biomass, is a promising option to mitigate climate change by increasing soil carbon sequestration. This material is also considered to have potential to remediate a soil with heavy metal pollution by increasing the soil's adsorptive capacity. This study conducted the assessment of two biochars considering the climate change mitigation potential and heavy metal removal capacity at the same time. Two kinds of biochars (BC_Ch, TW_Ch) were prepared by pyrolyzing the biomass of burcucumber (BC_Bm) and tea waste (TW_Bm). The soils polluted with Pb were mixed with biochars or biomass and incubated for 60 d. During the incubation, $CO_2$, $CH_4$, and $N_2O$ were regularly measured and the soil before and after incubation was analyzed for chemical and biological parameters including the acetate extractable Pb. The results showed that only the BC_Ch treatment significantly reduced the amount of Pb after 60 d incubation. During the incubation, the $CO_2$ and $N_2O$ emissions from the BC_Ch and TW_Ch were decreased by 24% and 34% compared to the BC_Bm and TW_Bm, respectively. The $CH_4$ emissions were not significantly affected by biochar treatments. We calculated the GWP considering the production of amendment materials, application to the soils, removal of Pb, and soil carbon storage. The BC_Ch treatment had the most negative value because it had the higher Pb adsorption and soil carbon sequestration. Our results imply that if we apply biochar made from burcucumber, we could expect the pollution reduction and climate change mitigation at the same time.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.427-438
• /
• 2015

The effects of different feeding times, using a diet containing 800 ppm betaine, on production, blood profile, and the short-chain fatty acid (SCFA), was investigated using 240 Cherry Valley (Anas platyrhynchos) meat ducks exposed to a scorching heat wave. The animals were randomly assigned to four groups, each of which was replicated three times with twenty ducks per replicate. The experimental period was 42 days for each group. Four groups were assigned into C (heat wave control group without betaine), T1 (ad libitum group fed a diet containing 800 ppm betaine), T2 (diet-restricted group fed twice daily between 05:00-10:00 and 17:00-20:00, using a diet containing 800 ppm betaine), and T3 (night-restricted group, fed from 17:00-10:00, with a diet containing 800 ppm betaine). At 42 days, body weight increased in order of T2, T1, T3 compared to the heat wave control group although. However, these differences were not found between the groups of T1 and T3. The heat wave control group, provided an ad libitum diet without betaine (C), showed an elevated feed conversion ratio compared to the groups fed a diet containing betaine. However, these differences were not found between the groups of T1, T2 and T3. RBC and platelet profiles except for PLT and MPV showed statistically significant differences between study groups fed a diet containing betaine. T2 presented significantly higher blood electrolytes $Na^+$ and $Cl^-$ than the other groups. T2 also showed a blood gas level that was generally higher than the other groups. Total SCFA, acetic acid and propionic acid concentration has been the increasing trend in T2, but butyric acid, isobutyric acid and valeric acid concentration has been the decreasing trend in T2 compared to the other groups. It is concluded that the feeding-restricted group, fed two times daily between 05:00-10:00 and 17:00-20:00, with a diet containing 800 ppm betaine may improve growth performance in meat ducks exposed to a scorching heat wave.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.396-407
• /
• 2020

As fossil fuels are depleted worldwide, alternative resources is required to replace fossil fuels, and biofuels are in the spotlight as alternative resources. Biofuels are produced from biomass, which is a renewable resource to produce biofuels or bio-chemicals. Especially, in order to substitute fossil fuels, the research focusing the biofuel (biodiesel) production based on CO₂ and biomass achieves more attention recently. To produce biomass-based biodiesel, the development of a supply chain network is required considering the amounts of feedstocks (ex, CO₂ and water) required producing biodiesel, potential locations and capacities of bio-refineries, and transportations of biodiesel produced at biorefineries to demand cities. Although many studies of the biomass-based biodiesel supply chain network are performed, there are few types of research handled the uncertainty in CO₂ supply which influences the optimal strategies of microalgae-based biodiesel production. Because CO₂, which is used in the production of microalgae-based biodiesel as one of important resources, is captured from the off-gases emitted in power plants, the uncertainty in CO₂ supply from power plants has big impacts on the optimal configuration of the biodiesel supply chain network. Therefore, in this study, to handle those issues, we develop the two-stage stochastic model to determine the optimal strategies of the biodiesel supply chain network considering the uncertainty in CO₂ supply. The goal of the proposed model is to minimize the expected total cost of the biodiesel supply chain network considering the uncertain CO₂ supply as well as satisfy diesel demands at each city. This model conducted a case study satisfying 10% diesel demand in the Republic of Korea. The overall cost of the stochastic model (US$ 12.9/gallon·y) is slightly higher (23%) than that of the deterministic model (US$ 10.5/gallon·y). Fluctuations in CO₂ supply (stochastic model) had a significant impact on the optimal strategies of the biodiesel supply network.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.867-879
• /
• 2016

Since the 1970s, the region of its own pedestrian center and environmental pollution caused by exhaust gases have been reduced gradually in a continuous increase of the vehicle, school route the central business district, around the school, the sidewalk where the vehicle do not pass, facilities of minimum for the safety of pedestrians and systematic management of an area where an unspecified number and alleys impassable is insufficient. Recently, in response to the "Law for convenience enhancing safety and walking" is enforced in Korea, research on Pedestrian only Street has been actively about the government, the standard for calculating the weights of evaluation associated with it. it is a actuality, however, there are insufficient, evaluation for business promotion is being conducted evaluation polite manner by using, for example, scale residence time and purpose of the passengers as there is no car that has been carried out on a voluntary basis through the municipality have. In this study, by suggesting a method for the selection of the street without a car, make a survey by placing a purpose in the selection method presentation of the street with no car to be construction future, was researching. F.G.I (Focus Group Interview) survey, professors, staff in urban, traffic field of experts in order to present the weights for the evaluation of the Pedestrian only Street by using the evaluation index by type of Pedestrian only Street, was interviewed about the evaluation index for the conducted for professionals engaged in the engineering company, and randomly selected 200 peoples, weighted evaluation of the street with Pedestrian only Street was proposed. By classifying the items purpose and goals of the evaluation type by this by applying the weight, and present the weight of the detailed indicators each corresponding to each item, and scored on the basis of the result, in this paper it can be so that one methodology for the selection standard for the construction as Pedestrian only Street, and the weight of the evaluation of the type that has been derived, the selection and evaluation methods and then added to these criteria to settle careful study of the reference should be performed further.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.7-20
• /
• 2011

This study was conducted to analyze the mixing ratio of raw feed materials for the methane mitigation and also to identify the minimum rearing density for improving the productivity of beef calves as eco-friendly fodder. Raw materials used in this study for the formulation of feed for methane reduction were crushed corn and alfalfa along with other 21 species. In addition, to investigate the appropriate rearing density, 12 Hanwoo calves with average weight of 150 kg was selected and experiment was conducted for four months. Methane gas emission (Bo) is about 3-4 times less in TMR 4 compared to TMR 1, 2 and 3. Feed price calculated for TMR 4 ration was also affordable. In addition, all TMRs showed a normal ruminal pH. Disappearance rate was observed to be lower in TMR 4 as compared to TMR 1, 2 and 3, but methane production decreased by 24 to 37%. The result showed improved total body weight, average daily gain and feed conversion ratio in rearing low-density ($18m^2/head$), and general treatment ($9m^2/head$) compared to overcrowding treatment ($6m^2/head$). In addition, blood components (total protein, glucose, AST, ALT and GGT factors) involved in health and disease treatments and health-related nutrition metabolism are lower in the low-density and general treatment compared to the high density treatment. Postural development (development of body size) i.e., weight, height and width significantly increased in the low and general density treatment compared to high density treatment. Especially excellent improvement was observed in low-density treatment than the general treatment. Moisture content, colonic bacteria and coccidium are higher in low and high density treatments than in the general treatment. The adequacy for beef rearing density is considered to be more desirable in an area more than $6m^2/head$. In conclusion, present study suggests that possibility of methane reduction through adjusting mixed feed ration. Also, rearing density is also an important factor in the growth and development of beef calves.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.901-916
• /
• 2017

This study was conducted to evaluate natural plant extracts for methane gas reduction in ruminants. Rumen fluid was collected from cannulated Hanwoo cow ($450{\pm}30kg$) consuming 400 g/kg concentrate and 600 g/kg timothy. The 15 ml of mixture comparing McDougall's buffer and rumen fluid in the ratio 2 to 1, was dispensed anaerobically into 50 ml serum bottles. Rumen fluid contents were collected and in vitro fermentation prepared control (timothy, 300 mg), ginseng, balloon flower, yucca plant, camellia, tea plant and ogapi extracts were added at the level of 5% against 300 mg of timothy as a substrate (v/w) and incubated for 3, 6, 9, 12, 24, 48, and 72 h. In vitro pH values range 6.55~7.41, this range include rumen titration. The dry matter digestibility was not differ between all treatments and control. Total gas emission was significantly higher (p<0.05) in ginseng and balloon flower treatments on 24 h than in control. Carbon dioxide emission was not differ all treatments on 9 h than in control and significantly higher (p<0.05) yucca plant, camellia and tea plant treatments on 12 h than control. Methane emission was not differ all treatments on 6 h than in control. The rumen microbial growth rate was significantly higher (p<0.05) in ginseng, balloon flower on 12 h and significantly higher (p<0.05) in ginseng, yucca plant, tea plant and ogapi treatments on 24 h than in control. Total VFA was significantly higher (p<0.05) in tea plant and ogapi treatments on 12 h than in control and significantly higher (p<0.05) in ginseng, balloon flower treatments on 48 h than in control. Acetic acid was significantly lower (p<0.05) in ginseng and balloon flower treatments on 24 h than in control. Propionic acid was significantly higher (p<0.05) in ginseng and balloon flower treatments on 48 h than in control. As a results, sixth natural plant extracts had no significant effect dry matter digestibility and negative on rumen fermentation, but not effect methane reduction.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.166-175
• /
• 1977

The author have performed an epidemiological study on the accidental deaths at industry from 1970 to 1975, in order to seek for the preventive measures of industrial accident with the under-standing of its cause and characteristics of the accidental deaths. The obtained results were as follows; 1. Total number of deaths for 6 years were 361 (350 males, 11 females). and the mean death rate was 33.8 per 100,000 industrial workers during 6 years. By the highest as 52.9 was in 1974 and the lowest as 13.7 in 1970. By the industry group, the death rate of Electricity, Gas and Water was 149.3, Construction 83.9 and the lowest was Manufacturing as 18.3. 2. Standardized mortality rate of the cases by the age group showed that 20-29 years old group was 43.0, 40-49 years old group 38.1, 30-39 years old group 32.0, and the lowest as 17.9 was under 19 years old group. 3. The cumulative percentage of the cases by years of service showed that under 6 months was 60.4%, under 1 year 72.9%, under 2 years 83.1%. 4. By the month of occurrence, the highest was 15.8% which occurred in August and the lowest was 5.8% in February. The highest as 19.1% was on Friday and the lowest as 11.9% on Monday by the day of a week. 5. By the causes of accident, car accidents was 28.3%, fall accidents 19.1%, accidents by a crash 9.1% in that order. By the location of injury, head was 44.6%, multiple injuries 33.0%, chest 10.5%, and back was the lowest as 1.9%. The distribution of the cases by nature of injury shelved that cerebral contusion and hemorrhage was 39.4%, fracture and dislocation 33.2%, asphyxia 8.0% in that order. 6. The cumulative percentage of the cases by the duration from injury to death showed that the injuried day was 74.2%, within 3 days after injury 88.5%, within 7 days 96.1%. Therefore most of the cases were occurred within 7 days after injury. 7. Byythe daily mean wages, most of the cases as 91.7% were under 2,000 won, and more 4,000 won was 1.6% merely.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.372-378
• /
• 1994

Background: Pressure support ventilation(PSV) is a new form of mechanical ventilatory support that assists spontaneous inspiraory effort of an intubated patient with a clinician-selected amount of positive airway pressure. Low level pressure support during inspiration can overcome the resistive component of inspiratory work imposed by an endotracheal tube. However the clinical efficacy of PSV as a weaning method has not been established yet. Object: The aim of study was to evaluate the efficacy of PSV when it is added to intermittent mandatory ventilation(IMV) in facilitating weaning precess compaired to IMV mode alone. Method: When the subject patients became clinically stable with their arterial blood gas analysis in acceptable range, they underwent weaning process either by IMV alone or by IMV plus PSV. The level of pressure support was held constant throught the weaning period. For the patients who required mechanical ventilation for less than 72 hr, 2h weaning trial was performed with IMV rate starting from 6/min. For the patients who required mechanical ventilation more than 72 hr, 7 hr weaning trial was performed with IMV rate starting from 8/min. For the patients who failed three consecutive trials of weaning, retrial of weaning was attempted over 3 days with IMV rate starting from 8/min. Clinical characteristics, APACHE II score and nutritional status were compared. For all patients, heart rate, mean blood pressure and respiratory rate were mornitored for 48 hrs after weaning trial started. Results: The total number of weaning trial was 37 in 23 patients(18 by IMV, 19 by IMV+PSV). Total ventilation time, APACHE II score and nutritional status were not statistically different between the two groups. The weaning success rate were not statistically different(38.3% by IMV, 42.1% by IMV+PSV) and the changes of mean blood pressure, heart rate, respiratory rate during first 48 hours were not different between the two groups. Conclusion: Low level PSV when added to IMV for weaning trial does not seem to improve the success rate of weaning from mechanical ventilation. PSV at 10cm $H_2O$ did not induce significant physiologic changes during weaning process.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.90-95
• /
• 2008

In this study, a combined process of sequential anaerobic-aerobic digestion (SAAD), fluidized-bed bioreactor (FBBR), and ultrafiltration (UF) for the treatment of small scale food waste leachate was developed and evaluated. The SAAD process was tested for performance and stability by subjecting leachate from food waste to a two-phase anaerobic digestion. The main process used FBBR composed of aerators for oxygen supply and fluidization, three 5 ton reaction chambers containing an aerobic mesophilic microorganism immobilized in PE (polyethylene), and a sedimentation chamber. The HRTs (hydraulic retention time) of the combined SAAD-FBBR-UF process were 30, 7, and 1 day, and the operation temperature was set to the optimal one for microbial growth. The pilot process maintained its performance even when the CODcr of input leachate fluctuated largely. During the operation, average CODcr, TKN, TP, and salt of the effluent were 1,207mg/L, 100mg/L, 50 mg/L, and 0.01 %, which corresponded to the removal efficiencies of 99.4%, 98.6%, 89.6%, and 98.5%, respectively. These results show that the developed process is able to manage high concentration leachate from food waste and remove CODcr, TKN, TP, and salt effectively.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.257-290
• /
• 2005

Korean energy use in industrial sector has increased more rapidly than other sectors during 1980~2000 periods. Relatively higher increases in industrial sector energy consumption raise questions whether government policy of rationalization of industrial energy use has been effective. In this study, we use 80-85-90 and 90-95-00 constant price input-output table to analyze increases in industrial energy use. Using an adjusted version of structural decomposition model introduced by Chen and Rose (1990), we decompose Changes of energy use into 17 elements. We classify entire industry sector into 32 sectors including four energy sectors (coal and coal products, refined petroleum, electricity and town gas). We then analyze changes of energy use by industrial level to check differences among industrial energy demand structures. Finally, we compare three industries, electronic product manufacturing, metal manufacturing and construction, that represent technology and capital intensive, energy and material intensive and labor and capital intensive industry. As results, we find that high energy using industries make the most effort to reduce energy use. Primary metal, petrochemical and mon-metal industries show improvements in elements such as energy and material productivity, energy and material imports, energy substitution and material substitutions towards energy saving. These results imply that although those industries are heavy users of energy, they put the best effort to reduce energy use relative to other industries. We find various patterns of change in industrial energy use at industrial level. To reduce energy use, electronic product manufacturing industry needs more effort to improve technological change element while construction industry needs more effort to improve material input structure element.