• 열병합발전
• /
• s.75
• /
• pp.20-22
• /
• 2010

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.112.2-112.2
• /
• 2011

미곡종합처리장에서 발생되는 농업부산물인 왕겨는 대부분 퇴비의 재료로 활용되고 있으며, 수익성이 없는 것으로 알려져 있다. 근래에 화석자원의 고갈이 진행되면서, 왕겨, 볏짚을 포함한 농업부산물은 화석연료와 달리 재생이 가능하고 지속 가능한 자원으로 각광을 받고 있다. 바이오매스를 이용하는 신재생에너지 기술로는 생물학적, 열화학적, 물리적 변환 기술 등이 있다. 그중 열화학적 변환 기술은 반응시간이 짧고, 단위부피당 처리량이 높으며 공정상의 폐기물이 적은 장점을 지니고 있어 왕겨의 에너지 활용에 효율적인 기술로 알려져 있다. 왕겨의 열분해 가스화는 CO, $H_2$, $CO_2$, 및 $CH_4$ 가스가 주성분인 합성가스로 전환되는 것을 말하며, 생산된 합성가스는 가스엔진의 발전 연료로 사용될 수 있다. 본 연구에서는 농업부산물인 왕겨를 이용한 열분해 가스화기에서 발생된 합성가스를 정제한 후, 20kW급 가스엔진을 적용하여 합성가스 에너지 활용특성에 관하여 고찰하였다. 그 결과 왕겨의 열분해/가스화반응에 의해 발생된 합성가스를 가스엔진으로 안정적으로 공급하였으며,16kw의 전력이 생산되는 것으로 나타났다.

• LP가스
• /
• s.110
• /
• pp.57-63
• /
• 2007

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.13-21
• /
• 2018

Technology trends of onboard and ground health management system software for aircraft gas turbine engines are surveyed. The software has changed from ground based software for fault detection and identification to a model based health identification technology for onboard software. This advanced algorithm is currently under development in a technically advanced country while domestic research is on the birth stage. This paper suggested that the optimal development plan of the software considering current technology state.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1427-1433
• /
• 2019

In this paper, Gas engine was tested for the energy of synthesis gas. As excess air ratio increase 1, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 in 1800 rpm and synthesis gas, thermal efficiency generally decrease and power generation was 34 kWm at λ 1.4. And excess air ratio increase 1, 1.1, 1.2, 1.3, 1.4 in power generation 34 kWm, thermal efficiency generally increase 34.2%, 36.9%, 37.2%, 37.4%, 38.1%. Total efficiency through power generation consumes 38.7 kg/h of fuel at 30 kWe load and recovers 57.3% of waste heat by recovering 57.3 kW of waste heat through 32.1% power generation efficiency and heat recovery from cooling water and exhaust gas. The total efficiency was 85.8%.

• Journal of the Korean Institute of Gas
• /
• v.12 no.3
• /
• pp.13-19
• /
• 2008

Among the various prime movers for combined heat and power (CHP) system, the CNG engine is the most commonly used power generation equipment of which power is less than 1MW. The 300 kW class CNG engine for CHP can meet stringent emission regulations with the adoption of stoichiometric air-fuel ratio control and three way catalyst. As the thermal efficiency of the stoichiometric ratio engine is lower than that of lean burn engine, it is necessary to operate the stoichiometric engine at its minimum spark advance for the best torque (MBT). However, knock control should be introduced for the engine under high intake air temperature conditions because MBT operating conditions are generally very close to those of knock occurrence. In this study, engine performances and knocking characteristics were experimentally investigated for the CNG engine that needs to be operated at higher intake air temperature conditions than normal conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.276-285
• /
• 2005

본 과제에서는 참여기업인 두산인프라코어(구 대우종합기계)에서 양산중인 국산디젤엔진을 개조해 가스엔진을 제작하였으며, 두산인프라코어에서 500시간 내구시험을 2차례 실시하였고, 주관기관인 한국기계연구원에서 국산 ECU를 활용하여 도시가스를 연료로 실험을 수행한 후 김포매립지에서 현장 적용실험을 수행하였다. 메탄농도가 46$\sim$56%로 변하는 조건에서 350kW의 출력을 달성하였으며, 삼원촉매를 적용한 결과 2005년 배기규제를 만족하는 결과를 도출하였다. 위탁기관인 전남대에서는 촉매 특성에 관한 실험을 1차년도와 2차년도에 수행하였다. 본 과제에서 개발한 LFG(=매립지가스) 엔진은 국내에서 개발된 최초의 LFG 엔진으로서 쓰레기 매립지 뿐만 아니라 음식물 쓰레기 혐기소화 처리과정, 분뇨나 축분 등의 혐기소화 처리과정, 하수종말 처리장 등에서 발생하는 바이오가스를 이용한 발전 동력원으로 사용될 수 있을 것으로 기대된다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.539-540
• /
• 2006

소형 열병합 (CHP, Combined Heat & Power)은 발전 용량이 1MW 이하인 발전 시스템을 지칭하는 용어로, 전기와 더불어 원동기에서 발생한 폐열을 회수하여 사용한 수 있는 발전 시스템을 말한다. 대표적인 원동기로서는 가스 엔진, 터빈, 마이크로 터빈, 연료 전지 등이 있다. 소형 열병합 시스템은 폐열 회수의 특징으로 기존 시스템에 비해 50% 이상의 에너지 이용 효율이 높으며, 기존의 대형 발전 시스템에서 필연적으로 존재하는 송전 및 배전 손실이 존재하지 않는 수요지 발전의 특징도 갖고 있어서 연료 절약형 에너지 생산 시스템으로서의 높은 가치를 가지고 있다. 또 다른 장점으로 열병합 발전 시스템은 여름철의 최대 전력 부하를 제거하는 역할을 할 수 있음으로 국가 전력 수요 공급의 안정화에 기여하는 바가 크다. 본 논문에서는 최근에 개발된 325kW급 열병합 가스엔진 발전 시스템의 주제어를 담당하는 통합 제어 장치의 개발과 소형 열병합 시스템의 시험 결과에 대해서 소개한다.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.13-29
• /
• 2016

In this study, we analyzed the causes of major faults in the biogas plant through the case of gas engine failure when cogenerating electricity and heat using biogas as a fuel in the actual sewage treatment plant and suggested countermeasures. Hydrogen sulfide in the biogas entering the biogas engine and water caused by intermittent malfunction of the water removal system caused intercooler corrosion in the biogas engine. In addition, the siloxane in the biogas forms a silicate compound with silicon dioxide, which causes scratches and wear of the piston surface and the inner wall of the cylinder liner. The substances attached to the combustion chamber and the exhaust system were analyzed to be combined with hydrogen sulfide and other impurities. It is believed that hydrogen sulfide was supplied to the desulfurization plant for a long period of time because of the high content of hydrogen sulfide (more than 50ppm) in the biogas and the hydrogen sulfide was introduced into the engine due to the decrease of the removal efficiency due to the breakthrough point of the activated carbon in the desulfurization plant. In addition, the hydrogen sulfide degrades the function of the activated carbon for siloxane removal of the adsorption column, which is considered to be caused by the introduction of unremoved siloxane waste into the engine, resulting in various types of engine failure. Therefore, hydrogen sulfide, siloxane, and water can be regarded as the main causes of the failure of the biogas engine. Among them, hydrogen sulfide reacts with other materials causing failure and can be regarded as a substance having a great influence on the pretreatment process. As a result, optimization of $H_2S$ removal method seems to be an essential measure for stable operation of the biogas engine.

• Journal of the Korean Institute of Gas
• /
• v.19 no.2
• /
• pp.29-36
• /
• 2015

This study is an 1-D numerical study prior to modification of diesel engine for power plants to natural gas/diesel dual fuel engine using GT-Power with 1.5MW diesel engine for power generation. Natural gas injector was installed to intake manifold for dual fuel engine model. Effects on engine performance and characteristics were investigated when dual fuel is used in unmodified diesel engine. The analysis was done under 5 conditions from 0% to 40% of mixing rate on 720RPM engine speed. As a result of research, the engine performance was decreased as increasing ratio of natural gas. Engine brake power was decreased by 18.4% under 40% mixing rate condition. To clarify the reason, effects of injection timing and period were evaluated with DOE method. Considering this result, optimization was done for these parameters. Also, comparison between performances of dual fueled engine and diesel engine was made after optimizing the timing of injection by DOE method. As a result, engine brake power was decreased by 8.55% under mixing rate 40% condition showing 12.5% improvement.