• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.65-70
• /
• 1996

본 연구는 상용공정해석용 프로그램으로서 고체 반응물을 포함하고 있는 공정을 해석할 수 있는 ASPEN(Advanced System for Process Engineering) 코드를 이용하여 IGCC BSU 실험플랜트를 모사하고 실제 실험 결과와 비교하였으며, IGCC BSU 시스템을 수정보완하여 가스정화공정을 도입하고 석탄가스화기에서 생성된 생성가스에 대해 발전 연료로서의 타당성 및 적합성 여부를 살펴보고 이 자료를 토대로 향후 IGCC 플랜트의 scale-up 및 실용플랜트에 대한 이해를 도모코자 한다. 또한 환경적인 측면에서 IGCC BSU에서 방출되는 슬랙, 비산재 및 flare stack을 통한 SOx 및 NOx 등의 방출량을 살펴보았다.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.235-244
• /
• 2013

Detection of halogens using laser-induced breakdown spectroscopy (LIBS) in open air is very difficult since their strong atomic emission lines are located in VUV region. In NIR region, there are other emission lines of halogens through electronic transitions between excited states. However, these lines undergo Stark broadening severely. We report the observation of the emission lines of halogens in laser-induced plasma (LIP) spectra in NIR region using a helium gas flow. Particularly, the emission lines of iodine at 804.374 and 905.833 nm from LIPs have been observed for the first time. In the helium ambient gas, Stark broadening of the emission lines and background continuum emission could be suppressed significantly. Variations of the line intensity, plasma temperature, and electron density with the helium flow rate was investigated. Detection of chlorine and bromine in flame retardant of rubbers was demonstrated using this method. Finally, we suggest a pulsed helium gas jet as a practical and ecomonical helium gas source for the LIBS analysis of halogens in open air.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.341-344
• /
• 2010

발화점 감지 튜브 자동소화장치는 화재발생시 일정한 온도가 되면 튜브가 녹아 가스가 방출되면서 소화용기내의 소화약제가 방출되어 화재를 진압하는 장치로써 전력의 공급 없이도 화재의 감지 및 소화가 가능한 자동소화장치이다. 본 논문에서는 감지온도 $100^{\circ}C{\sim}110^{\circ}C$에서 열에 반응하여 가스방출이 가능한 첨단 폴리머 튜크 재질의 발화점감지 튜브를 개발하고자 기존 발화점 감지 튜브의 특성을 분석하였다.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.483-492
• /
• 1994

Direct solid analysis of various kinds of metal samples has been conducted by glow discharge. In this laboratory, the gas-jet assisted glow discharge(GJGD) device has been developed and characterized. The effect of changes in applied current, cell pressure and flow rate on atomic emission signals obtained from a jet-assisted cathodic sputtering was investigate. The emission intensities of Cu, Zn, and Ar were measured. They were increased with the current. But the intensities were decreased by increasing the flow rate of argon due to the diffusion and transportation of particles into plasma. By increasing the pressure of the cell, the intensities were greatly decreased because of enhancement of redeposition onto the surface of the sample.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.08a
• /
• pp.76-76
• /
• 2006

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.69-70
• /
• 2013

• Journal of the Korean Institute of Gas
• /
• v.13 no.3
• /
• pp.49-53
• /
• 2009

Relief systems can improve the process safety because it has the function for the prevention of overpressure. Flare stacks is necessary to avoid explosion, radiation, or toxicity by waste-gas emitted from relief system. Safe combustion is one of the important factors to improve safety and the quantity and velocity emitted is ruled in the API code 521. Due to the pressure of released gas and mass flow, a flame from flare stack is similar to jet fire. In this study, we have investigated the effect of flame form on complete combustion and heat emission. API code was similar to jet fire model in flame length, the flame had an effect on the ground.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.170-179
• /
• 2017

We investigated design requirements of feed water drain and hydrogen vent systems for the sodium-water reaction pressure relief system (SWRPRS) of the prototype generation IV sodium cooled fast reactor (PGSFR). We evaluated the areas of the gas vent pipe of the water dump tank and the length of the water drain pipe of the steam generator to rapid drain of the water steam inside the steam generator for the normal and refueling operations, respectively. We also calculated the diameter of the gas vent pipe of the sodium dump tank which met its design pressure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.362-366
• /
• 2007

As the industry of 21C has been developed, the gas industry has been grown and its convenience but it accompany risk for using gas. Therefore, we designed a vent area to prevent the collapse of the booth by the explosion pressure during test. The explosion booth was installed fur training safety supervisors to aware the risk of gas explosion. The vent area was designed based on the exhaust model of NFPA 68. It was calculated at $2.8297m^2$ for LPG and at $3.0518m^2$ for NG.

• Journal of the Korean Vacuum Society
• /
• v.1 no.3
• /
• pp.332-335
• /
• 1992

초고진공 시스템에 있어서 시스템을 대기압으로 바람을 넣은 후 정상상태로의 신 속한 원상회복을 위하여 건조질소 통풍(venting) 장치를 고안 제작하였다. 이 장치는 액체 질소 저장통, 증발기 및 여과기로 구성되어 있다. 이 장치에 의한 통풍효과와 다른 방법에 의한 통풍효과를 가스 방출률 측정을 통하여 정성적으로 비교 분석하였을 때, 본 장치가 가 장 낮은 가스 방출률과 가장 빠른 진공회복을 보여주었다.