• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1355-1360
• /
• 2008

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. Gas welding is very important and useful technology in fabrication of an railroad car and vehicles structure. However fatigue strength of the gas welded joints is considerably lower than parent metal due to stress concentration at the weldment, fatigue strength evaluation of gas welded joints are very important to evaluate the reliability and durability of railroad cars and to establish a criterion of long life fatigue design. In this paper, ${\Delta}P-N_f$ curve were obtained by fatigue tests. Using these results, the accelerated life test (ALT) is conducted. From the experimental results, an acceleration model is derived and acceleration factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of plug and ring gas welded joints and data analysis by statistic reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.1-8
• /
• 2011

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. Gas welding is very important and useful technology in fabrication of an railroad car and vehicles structure. However fatigue strength of the gas welded joints is considerably lower than parent metal due to stress concentration at the weldment, fatigue strength evaluation of gas welded joints are very important to evaluate the reliability and durability of railroad cars and to establish a criterion of long life fatigue design. In this paper, ${\Delta}-N_f$ curve were obtained by fatigue tests. Using these results, the accelerated life test (ALT) is conducted. From the experimental results, an acceleration model is derived and acceleration factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of plug and ring gas welded joints and data analysis by statistical reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• International Journal of Highway Engineering
• /
• v.2 no.2
• /
• pp.139-148
• /
• 2000

Currently existing Accelerated Pavement Testing (APT) systems developed in several countries have been employed mainly to test the performance of asphalt pavement. Meanwhile, the length of concrete pavement is similar to that of asphalt pavement in expressways of Korea. and is expected to increase due to its durability and compatibility to our weather condition. To meet the society's demand of having our own APT system which can examine the long-term performance of concrete pavement, a contract study to develop Korea Accelerated Loading and Environment Simulator (KALES) for concrete pavement has been performed for 3 years from 1997 through 1999. Through the project, a detailed design was Peformed for the KALES system in which the entire structure of KALES, loading mechanism, wandering mechanism, suspension system, driving system were proposed. Also in advance to design a full-scale KALES system, a sample scale model was manufactured and tested for operating motion and force distribution. It is evident that the proposed prototype KALES system will provide higher degree of traffic simulation and durable operation, based on the satisfactory fatigue analysis.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.81-92
• /
• 2018

For a marine bridge foundation construction, a large-circular-steel-pipe has been proposed for supporting vertical load and preventing water infiltration. However, a ship collision can adversely affect the structural stability. This paper presents a fundamental study on dynamic responses of the large-circular-steel-pipe by an impact load. In laboratory experiments, small-scaled steel pipe is installed in a soil tank. The soil height and water level are set to 23 cm and 25~70 cm, respectively. The upper part of the steel pipe is impacted using a hammer to simulate the ship collision. The dynamic responses are measured using accelerometers and strain gauges. Experimental results show that the strain decreases as the measured location is lowered. The higher frequency components appear in the impact load condition compared to the microtremor condition. However, the higher frequency components measured at the strain gauge located below the water level do not appear. For the accelerometer signal, the maximum frequency under the impact load is higher than that of the microtremor. The maximum frequency decreases as water level increases but it is larger than the maximum frequency of the microtremor. This study shows that strain gauge and accelerometer can be useful for evaluating the dynamic responses of large-circular-steel-pipes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.810-811
• /
• 2009

• Journal of the Korean Geotechnical Society
• /
• v.37 no.6
• /
• pp.39-50
• /
• 2021

Recently, as the occurrence of earthquakes with a magnitude of 5.0 or higher in Korea increases, many studies and interests in seismic design are increasing. A lot of damage was caused by the Pohang earthquake in 2017, and port facilities such as a breakwater were also damaged. This study analyzed the dynamic behavior of the upright breakwater, an external facility, based on a centrifugal model experiment. A series of centrifugal model test was conducted by three different seismic waves such as Pohang Earthquake Wave, Artificial Wave I, and II. As a result, the dynamic behavior of upright breakwater was analyzed. The review showed that acceleration amplification tends to be suppressed as breakwater foundation ground increases support and stiffness through DCM reinforcement and riprap replacement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2016

This study aims to develop a model by which city bus drivers who are likely to cause an accident can be figured out based on the information about their actual driving records. For this purpose, from the information about the actual driving records of the drivers who have caused an accident and those who have not caused any, significance variables related to traffic accidents are drawn, and the accuracy between models is compared for the classification models developed, applying a discriminant analysis and logistic regression analysis. In addition, the developed models are applied to the data on other drivers' driving records to verify the accuracy of the models. As a result of developing a model for the classification of drivers who are likely to cause an accident, when deceleration ($X_{deceleration}$) and acceleration to the right ($Y_{right}$) are simultaneously in action, this variable was drawn as the optimal factor variable of the classification of drivers who had caused an accident, and the prediction model by discriminant analysis classified drivers who had caused an accident at a rate up to 62.8%, and the prediction model by logistic regression analysis could classify those who had caused an accident at a rate up to 76.7%. In addition, as a result of the verification of model predictive power of the models showed an accuracy rate of 84.1%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.177-177
• /
• 2022

기후변화 및 해안 구조물의 증가 등 여러 원인이 연안침식 및 해안선 변화와 같은 연안의 지형변화를 가속하고 있다. 빠르게 변화하는 연안의 지형변화예측 및 대응책 강구를 위해서는 연안의 유사이송 현상에 대한 신속한 예측이 필요하다. 본 연구에서는 GPU 엔진 기반 파랑해석모형인 Celeris Advent를 활용하여 실시간으로 연안의 유사이송 모의가 가능한 수치모형을 개발하였다. Celeris Advent는 GPU의 병렬코어를 활용해 실시간 연산과 GUI를 통한 사용자와의 실시간 상호작용이 가능한 모형이다. 지배방정식은 확장형 Boussinesq 방정식에 유사이송방정식을 양방향 결합하여 구성하였고, 지배방정식에는 하이브리드 유한체적-유한차분 수치기법을 적용하여 이송항은 유한체적법(Kurganov & Petrova, 2007), 소스항은 유한차분법을 통해 이산화하여 해석한다. 유사이송방정식은 수심적분형 이송확산방정식에 침식 및 퇴적 플럭스를 반영하는 소스항을 결합하여, 이송항 및 확산항을 통해 유사의 이송/확산을 고려함과 동시에 소스항을 통해 하상과의 상호작용을 고려하였다.

• Journal of the Korean Data and Information Science Society
• /
• v.8 no.2
• /
• pp.183-194
• /
• 1997

In accelerated life tests, the failure time of an item is observed under a high stress level and based on the time, the failure rates of items we estimated at the normal stress level. In this paper, when the mean of the prior distribution of a parameter is known in Weibull lifetime model with censored failure time data, we study various estimating methods to obtain the empirical Bayes estimator of a parameter from the empirical Bayes approach under the normal stress level by considering the fact that the Bayes estimator is the function of prior parameters and of the acceleration parameter representing the effect of acceleration. And we compare the performance of several empirical Bayes estimators of a parameter in terms of the Bayes risk.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.4
• /
• pp.251-270
• /
• 2004

When an institution adopts digital archiving, an economic analysis is required. Though the existing economic analysis considers only tangible benefits, a model to reflect the intangible benefits of digital archiving is needed. This study suggests a comprehensive economic analysis model by applying the value chain concept of information economics. A simulation is conducted on the digital archiving by adopting the concepts of value accelerating and value linking to the economic analysis, and economic factors are derived through sensitivity analysis. The results support the perception that digital archiving contributes to the enhancement of the institution's efficiency.