• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.2
• /
• pp.94-101
• /
• 2016

In this paper, aerodynamic effects on the flow field under the wing with varying aspect ratio were investigated by measuring pressures on the lower surface of wing and analysing velocity components using Particle Image Velocimetry at Reynolds numbers of $1.384{\times}10^5$ and $2.306{\times}10^5$. In case of aspect ratio 4.8 which keeps the wing tip at a distance of 80% chord length from the pylon, the vortex from the wing tip influenced the flow field under the wing by reducing static pressures on the lower surface and increasing the velocity in proximity of the wing tip. Throughout the results, it is observed that aerodynamic effects of wing tip on the flow field around pylon under wing become insignificant as the aspect ratio increases.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.10 s.340
• /
• pp.55-64
• /
• 2005

In this paper, we designed floating point units to accelate real-time 3D Graphics for Geometry processing. Designed floating point units support IEEE-754 single precision format and we confirmed 100 MHz performance of floating point add/mul unit, 120 MHz performance of floating point NR inverse division unit, 200 MHz performance of floating point power unit, 120 MHz performance of floating point inverse square root unit at Xilinx-vertex2. Also, using floating point units, designed Geometry processor and confirmed 3D Graphics data processing.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.5
• /
• pp.337-344
• /
• 2003

In DC/DC converter and VVVF inverter, which are the must dominant noise sources of Maglev train, noise is radiated from core and coil excited by MS(Magnetostriction). The main noise source of DC/DC converter is transformer whose spectrum shows strong peaks associated with harmonics of exciting frequency, On the other hand, LIM/VVVF noise is dominated by the harmonics of switching frequency, whereas harmonics of exciting frequency are not significant. As switching frequency is increased in VVVF inverter, it is shown that the harmonics are shifted to higher frequency range. If switching frequency is increased from 700㎐ to 2 ㎑, It is measured that noise can be reduced by 5 to 6 ㏈. Since complete mathematical description of MS phenomena is far beyond the present technology, vibration spectrum is investigated qualitatively in this paper, where effect of increasing switching frequency is confirmed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.34-41
• /
• 2001

A study has been conducted to observe the slot film cooling effect on a convergent nozzle wall. The slot film cooling is used to protect the nozzle wall from the hot combusted gas by the coolant injected from the slot around the inner wall of the nozzle. The film cooling effectiveness and the heat transfer to the nozzle wall are influenced significantly by the blowing ratio of the coolant to the main flow and those are also influenced by the shape of the slot and the flow acceleration in the nozzle. In the present study, the heat transfer for the various blowing ratios has been performed by the experimental method and the results are compared with the results computed by the empirical formula. The numerical method has been conducted to compare the film cooling effectiveness of the convergent nozzle with that of the cylinder. For the relatively low blowing ratio, the cooling effectiveness increases sharply as the blowing ratio increases, and the increasing rate slows down for the high blowing ratio.

• Broadcasting and Media Magazine
• /
• v.11 no.4
• /
• pp.118-131
• /
• 2006

With rapid development in ultra fast communication and digital multimedia, the realistic broadcasting technology, that can stimulate five human senses beyond the conventional audio-visual service is emerging as a new generation broadcasting technology. In this paper, we introduce a haptic broadcasting system and related core system and component techniques by which we can 'touch and feel' objects in an audio-visual scene. The system is composed of haptic media acquisition and creation, contents authoring, in the haptic broadcasting, the haptic media can be 3-D geometry, dynamic properties, haptic surface properties, movement, tactile information to enable active touch and manipulation and passive movement following and tactile effects. In the proposed system, active haptic exploration and manipulation of a 3-D mesh, active haptic exploration of depth video, passive kinesthetic interaction, and passive tactile interaction can be provided as potential haptic interaction scenarios and a home shopping, a movie with tactile effects, and conducting education scenarios are produced to show the feasibility of the proposed system.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.221-229
• /
• 2013

To find the influence of incident angle of wave on the moment of 3 storied steel moment resisting frame which is placed on the concrete rectangular pontoon, the fluid dynamic analysis is carried out, varying the period of wave from 5 to 15 second by 2 seconds. As increasing incident angle of wave to longitudinal axis, the influence of RAO-rolling is increased. The moment of longitudinal frame is increased apparently by the wave pressure when the incident angle is $0^{\circ}$. And the moment of the frame due to the wave pressure is decreased as the incident angle is increased. But the moment of frame due to acceleration caused from pitching and rolling is increased. It is shown that the increased moment when incident angle is $90^{\circ}$ is much greater than that of incident angle $0^{\circ}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3633-3642
• /
• 2015

Single-base propellants contain a single energetic component: nitrocellulose. Accurate predictions of propellant shelf-life should result in cost savings in terms of human and material resources. This study derived an optimized kinetic model reaction order that described stabilizer consumption and estimated propellant shelf-life. High temperature accelerated aging tests gave an optimum reaction order value of 1.15481, from which the minimum standard error of a linear regression estimate of 16.284 was obtained. At normal storage temperature of $21-30^{\circ}C$, propellants should have a safe shelf-life of 140 years, and a minimum of 35 years. It is necessary to consider the temperature range in ammunition storage areas to predict propellant shelf-life more accurately.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.293-293
• /
• 2010

최근 태양전지 연구에서 저가격화를 실현하는 방법 중 하나로 폐 실리콘 웨이퍼를 재생하는 방법에 관하여 많은 연구가 진행되고 있다. 그러나 기존 웨이퍼 재생공정은 높은 재처리 비용과 복잡한 공정등의 많은 단점을 가지고 있다. 챔버 내에 압축된 공기나 가스에 의해 가속된 미세 파우더들이 재료와 충돌하면서 식각하는 기계적 건식 식각 공정 기술이라고 할 수 있는 micro blaster 공정을 이용하면 기존 재생공정보다 낮은 재처리 비용과 간단한 공정으로 재생웨이퍼를 제작할 수 있다. 하지만 이러한 micro blaster 공정은 식각 후 표면에 많은 particle과 crack을 형성시켜 태양전지용으로 사용하기에 단점을 가진다. 본 연구에서는 이러한 micro blaster를 이용한 태양전지용 재생 웨이퍼를 제작하기 위해 폐 실리콘 웨이퍼의 표면 물질을 식각하고, 식각 후 충돌에 의해 발생된 표면의 particle과 crack을 DRE(Damage Remove Etching)공정으로 제거하는 연구를 진행 하였다. 먼저 폐 실리콘 웨이퍼와 같은 표면을 형성하기 위하여 시편 표면에 각각 Al($2000{\AA}$), $Si_3N_4(3000{\AA})$, $SiO_2(1{\mu}m)$, AZ1512($1{\mu}m$)을 형성하고 micro blaster의 파우더 크기, 압력, 스캔 속도 등의 공정 조건에 따라 폐 실리콘 웨이퍼 표면 물질을 식각하였다. 식각 후 폐 실리콘 웨이퍼의 식각된 깊이와 표면 물질 잔량을 측정하고, 폐 실리콘 웨이퍼의 표면에 particle과 crack, 요철이 형성되어 있는지를 확인하였다. 그 결과 폐 실리콘 웨이퍼에 형성된 물질의 두께 이상으로 식각되었으며, 표면 물질의 잔량이 남아 있지 않았고, 표면에 많은 particle과 crack, 요철이 형성되었다. 표면에 형성된 요철은 유지하면서 많은 particle과 crack을 제거하기 위하여 micro blaster공정 후 DRE 공정으로 표면 개선이 필요하였다. 이때 남겨진 요철은 입사광량을 증가시키고, 표면 반사율을 감소시켜 태양전지내의 흡수하는 빛의 양을 증가시키는 태양전지 texturing 공정 효과로 작용하게 된다. 표면에 남은 particle과 crack을 완전히 제거하면서 요철은 유지할 수 있게 HNA 용액의 농도와 시간에 따른 식각 정도를 측정하였다. DRE 공정 후 표면 particle과 crack이 완전히 제거되어 표면이 개선됨을 확인하였다. Micro blaster를 이용하여 폐 실리콘 웨이퍼의 표면을 식각하고, DRE공정으로 표면을 개선함으로써 태양전지용 기판으로의 재생 가능성을 확인하였다.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.27-34
• /
• 2010

Multilayer edible coatings was applied to lemon with beeswax-hydroxypropyl methylcellulose (BW-HPMC), soybean oil-carboxymethyl cellulose (SBO-CMC), and carnaubawax-shellac-locust bean gum (CW-SL-LBG), respectively. The multilayer was composed of two layers of the same material, but the outer layer only contained vitamins C and E as antioxidants. Coating amounts built on lemon peel were measured to be large in the order of CW-SLLBG> BW-HPMC> SBO-CMC. The coated lemons were stored at 30${^{\circ}C}$ for 12 days. CW-SL-LBG showed the least change during the storage in weight loss, rotten rate, firmness, and browning. Whereas SBO-CMC had the least change in pH, soluble solid amount, and titratable acidity. In a sensory test, CW-SL-LBG was evaluated to be the best in the attributes such as spoilage, glossiness, color, firmness, and flavor. Overall CW-SL-LBG was judged to be the best for multilayerd coating with vitamin C and E on lemon.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.535-538
• /
• 2009

Auto Pilot is the system which move automatically the vessel through locating operation mode to automatic after entering operating course using a electronic chart or plotter. And water jet is the a propulsion system that make a power to push the vessel through spouting the accelerated water which is absolbed by the hole in the bottom of vessel. The water jet receive the effect of the depth of water lowly, it's acceletion efficiency is higher under high speed and have an advantage on vibrating and floating sound, so it's demand is increasing as new propulsion system. However, the signal systems of auto Pilot and water jet are defferant, we need the system to communicate between each system. We propose the interface system which communicate between Auto pilot and water jet efficiently in this journal.