• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.515-523
• /
• 2020

If the safety factor does not secure the safety factor suggested in the design standard at the slope design stage, the safety factor is secured by installing an anchor. Stability analysis is used to verify the effect of reinforcing the slope of the anchor, but in this process, most of the anchor construction intervals are assumed to be equal and analyzed. For economical and effective slope reinforcement, stability analysis is required by adjusting the anchor construction interval. In this study, the effect of the anchor construction interval on the change of the safety factor of the slope was identified. Stability analysis was performed by setting a virtual slope with two berms and different anchor construction intervals. As a result of the analysis, the stability of the slope is secured when the anchor spacing of the lower surface is narrowed and the anchor gaps of the upper and middle surfaces are wider than when anchors are installed at the same intervals on the upper, middle, and lower surfaces of the slope. The result was a 15% reduction in the amount of anchors. This means that, rather than reinforcing anchors at the same intervals, it is economical and effective to have an economical and effective reinforcement effect to vary the anchor construction intervals according to the slope characteristics.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.44-53
• /
• 2021

The flood prevention capacity of drainage facilities in urban areas has weakened because of the increase in impervious surface areas downtown owing to rapid urbanization as well as localized heavy rains caused by climate change. Detention can be installed in trunk sewers and linked to existing drainage facilities for the efficient drainage of runoff in various urban areas with increasing stormwater discharge and changing runoff patterns. In this study, the concept of detention in trunk sewers, which are storage facilities linked to existing sewer pipes, was applied. By selecting a virtual watershed with a different watershed shape, the relationship between the characteristic factors of detention in the trunk sewer and the design parameters was analyzed. The effect of reducing stormwater runoff according to the installation location and capacity of the reservoir was examined. The relationship between the installation location and the capacity of the detention trunk sewer in the Dowon district of the city of Yeosu, South Korea was verified. The effects of the existing water runoff reduction facility and the detention trunk sewer were also compared and analyzed. As a result of analyzing the effects of reducing internal inundation, it was found that the inundation area decreased by approximately 66.5% depending on the installation location of the detention trunk sewer. The detention trunk sewer proposed in this paper could effectively reduce internal inundation in urban areas.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1445-1454
• /
• 2021

In this study, based on the expectation that beauty education based on VR experience of beauty majors will have on expertise and practical ability, it was attempted to develop VR-based beauty subjects and secure an educational environment. A total of 106 learners participated in the study, and the online questionnaire consisted of questions about the development of VR-based beauty subjects, recognition of expertisee and practical skills, and general characteristics. The collected data were verified at the significance level of .05 using the SPSS 21.0 statistical program. As a result of frequency analysis, factor analysis, correlation, and linear regression analysis, the higher the grade, the higher the perception of VR-based beauty subjects development (p<.01). The perception of VR-based beauty subject development was related to VR-based expertise and practical skills for each sub-factor of the recognition of expertise (r=.683, p<.001), practical skills (r=.676, p<.001), and industry-related awareness (r=.543, p<.001). It was found that there was a statistically significant positive (+) correlation with related perception. In addition, it was found that the higher the awareness of VR-based beauty subjects development, the higher the expectation that expertise, practical ability, and industry-related awareness would be improved. As a result, the necessity of developing VR-based beauty subjects and expectations for course operation of majors in the beauty subjects environment were confirmed. In follow-up studies, it is necessary to expand the scope of the sample.

• Journal of the Korean Society of Earth Science Education
• /
• v.15 no.1
• /
• pp.91-102
• /
• 2022

Sinsu Island in Korea National Marine Park is suitable for geological learning and geotourism as various geological structures, geological activities, and fossils can be observed. In this study, eight geosites were developed by analyzing 2015 revision science curriculum. The 3D panoramic geological virtual field trips were developed according to the three-step outdoor learning model. The 3D panoramic geological virtual field trips, which consist of 8 classes, are composed of cooperative learning by group, enabling autonomous inquiry activities. It is designed to realize convergence education that can learn not only geology but also creativity and humanity through nodular Limestones, exfoliation, salt weathering, perforated shell holes, sedimentary structures and environments, dinosaurs habitats, and volcanic activity. Five experts revised and supplemented the Delphi analysis method to verify the validity of the development purpose and direction. The satisfaction with the geological field for Sinsu Island course was 4.52, indicating that the overall satisfaction with the field course was high. By reflecting on the opinions of each student and reinforcing safety education, we completed the 3D panoramic geological virtual field trips for Sinsu Island. The 3D panoramic geological virtual field trips in Sinsu Island in Korea National Marine Park will be a good example of geology learning tourism where you can make memories and enjoy while studying geology.

• Knowledge Management Research
• /
• v.23 no.3
• /
• pp.23-44
• /
• 2022

With the development of blockchain technology, play-to-earn (P2E) games, one of the decentralized applications (dApps), are receiving great social attention. P2E games are positively evaluated as areas with high growth potential based on blockchain technology, and at the same time, they are negatively evaluated as speculative as people can cash P2E game items in the form of cryptocurrency. In this situation, the purpose of this study is to investigate factors affecting the intention to use P2E games. Along with the discussion of hedonic system adoption, we consider the factors with perceived enjoyment, economic incentive, and social influence. In order to verify our research model, data were collected from 350 adults with P2E game experience or recognition, and a structural equation model was carried out. The analysis results find that perceived enjoyment and subjective norm have a significant positive effect on the intention to use P2E games, and economic incentive does not have a significant effect. In addition, peer influence and external influence have a significant positive effect on subjective norm. Drawing on these findings, we present several academic and practical implications for future research.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.304-311
• /
• 2022

Although the SEAD(suppression to enemy air defenses) mission is a strategically important task in modern warfare, the high risk of direct exposure to enemy air defense assets forces to use of unmanned aerial vehicles. this paper proposes a path planning algorithm for SEAD mission for an unmanned aerial vehicle and a method for calculating the mission effectiveness on the planned path. Based on the RRT-based path planning algorithm, a low-altitude ingress/egress flight path that can consider the enemy's short-range air defense threat was generated. The Dubins path-based Intercept path planning technique was used to generate a path that is the shortest path while avoiding the enemy's short-range anti-aircraft threat as much as possible. The ingress/intercept/egress paths were connected in order. In addition, mission effectiveness consisting of fuel consumption, the survival probability, the time required to perform the mission, and the target destruction probability was calculated based on the generated path. The proposed techniques were verified through a scenario.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.63-80
• /
• 2022

As a technology to analyze and predict an issue has been developed by constructing real space into virtual space, it is becoming more important to acquire precise spatial information in complex cities. In this study, images were acquired using an unmanned aerial vehicle for urban area with complex landscapes, and land cover classification was performed object-based image analysis and semantic segmentation techniques, which were image classification technique suitable for high-resolution imagery. In addition, based on the imagery collected at the same time, the replicability of land cover classification of each artificial intelligence (AI) model was examined for areas that AI model did not learn. When the AI models are trained on the training site, the land cover classification accuracy is analyzed to be 89.3% for OBIA-RF, 85.0% for OBIA-DNN, and 95.3% for U-Net. When the AI models are applied to the replicability assessment site to evaluate replicability, the accuracy of OBIA-RF decreased by 7%, OBIA-DNN by 2.1% and U-Net by 2.3%. It is found that U-Net, which considers both morphological and spectroscopic characteristics, performs well in land cover classification accuracy and replicability evaluation. As precise spatial information becomes important, the results of this study are expected to contribute to urban environment research as a basic data generation method.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.29-38
• /
• 2021

Korean typefaces are characterized on two axes: a font is either serifed or non-serifed, and it is either square-frame or non-squared. A serifed font entails small strokes that are regularly attached to the ends of larger strokes. Conversely, fonts without these marks are termed sans-serif. One of the exclusive features of Korean typeface of the square-frame type is that in such fonts, vowels and consonants often with their final vowels, are harmonically placed within the boundaries of the virtual square. We hypothesize that serifed and squared-frame typefaces are more popular and preferred owing to their widespread use throughout history. A survey incorporating Korean pangrams written with serif, sans-serif, squared, and non-squared typefaces was designed to test the present hypothesis. We found that people typically preferred and were more familiar with squared typefaces compared to non-squared typefaces. However, no difference was observed between serifed and san-serif typefaces. Furthermore, a positive correlation was found between familiarity and preference ratings only where the typefaces had squared and serifed features. The results revealed that Korean typefaces with the squared feature were more well-known and, therefore, more preferred to the typefaces without it. The results further indicated that Korean typefaces with the squared feature can be recommended for people's familiarity to it and the comfort it provides, and their emotional relevance and sensibility enhanced if serifs are added.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.1-11
• /
• 2022

In this paper, we propose an NFT(Non-Fungible Token)-based access control method for safely sharing data between users in blockchain environment. Since all data stored in the blockchain can be accessed by anyone due to the nature of the technology, it is necessary to control access except for authorized users when sharing sensitive data. For that, we generate each data as NFT and controls access to the data through the smart contract. In addition, in order to overcome the limitations of single ownership of the existing NFT, we separated the NFT into ownership and use rights, so that data can be safely shared between users. Ownership is represented as an original NFT, use rights is represented as a copied NFT, and all data generated as NFT is encrypted and uploaded, so data can be shared only through the smart contract with access control. To verify this approach, we set up a hypothetical scenario called Building Information Modeling (BIM) data trade, and deployed a smart contract that satisfies 32 function call scenarios that require access control. Also, we evaluated the stability in consideration of the possibility of decryption through brute-force attack. Through our approach, we confirmed that the data can be safely shared between users in blockchain environment.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.1
• /
• pp.7-15
• /
• 2023

Recently, as interest in air quality in vehicles increases, the use of fine dust detection sensors for air quality measurement is becoming common. An axial-flow fan is inserted in the fine dust sensor installed in the air conditioning system in the vehicle to prevent dust from sinking directly on the sensor. When the sensor operates, the flow noise caused by the rotation of the axial-flow fan acts as a major noise source of the fine dust sensor. flow noise is recognized as one of the product competitiveness of fine dust sensors. In this study, the noise was gradually reduced at the same flow rate by improving the flow performance of the small axial flow fan. First, a virtual fan performance tester consisting of about 20 million grids was developed to analyze the aerodynamic performance of the target small axial-flow fan. In addition, the flow field was simulated by using compressible Large Eddy Simulation for direct computation of flow noise as well as high-accurate prediction of flow rate. The validity of numerical method are confirmed through the comparison of predicted results with experimental ones. After the effects of pitch angle on flow performance were analyzed using the verified numerical method, the pitch angle was determined to maximize the flow rate. It was found that the flow rate was increased by 8.1 % and noise was reduced by 0.8 dBA when the axial-flow fan with the optimum pitch angle was used.