• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.419-424
• /
• 2011

Objectives: This study was aimed to determine the effects of temporary sealing materials on microtensile bond strength between resin-coated dentin and resin inlay and to compare the bonding effectiveness of delayed dentin sealing and that of immediate dentin sealing. Materials and Methods: The teeth were divided into 4 groups: group 1, specimens were prepared using delayed dentin sealing after temporary sealing with zinc oxide eugenol (ZOE); group 2, specimens were prepared using immediate dentin sealing and ZOE sealing; group 3, specimens were prepared using immediate dentin sealing and Dycal (Dentsply) sealing; group 4, specimens were prepared using immediately sealed, and then temporarily sealed with a resin-based temporary sealing material. After removing the temporary sealing material, we applied resin adhesive and light-cured. Then the resin inlays were applied and bonded to the cavity with a resin-based cement. The microtensile bond strength of the sectioned specimens were measured with a micro-tensile tester (Bisco Inc.). Significance between the specimen groups were tested by means of one-way ANOVA and multiple Duncan's test. Results: Group 1 showed the lowest bond strength, and group 4 showed the highest bond strength (p < 0.01). When temporary sealing was performed with ZOE, immediate dentin sealing showed a higher bonding strength than delayed dentin sealing (p < 0.01). Conclusions: Based on these results, immediate dentin sealing is more recommended than delayed dentin sealing in bonding a resin inlay to dentin. Also, resin-based temporary sealing materials have shown the best result.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.80-99
• /
• 2012

It is known that there are two Gabong taesil (shrine for King's umbilical cord) of King Danjong, the 6th king of Joseon, remaining today. One of them is Mt. Sogok in Sacheon-city, Gyeongsangnam-do and the other is Mt. Beomnim in Seongju-gun, Gyeongsangbuk-do. The academic sector argued about this matter as there cannot be two Gabong taesil for one king. I once argued that Taesil on Mt. Beomnim in Seongju is King Danjong's Gabong taesil and Danjong taesil in Sacheon is the one for Prince Inseongdaegun, the eldest son of King Yejong. At that time, however, I had not examined the archaeological relics found in these places. In result of making an archaeological approach, I have come to the following conclusions :1. King Danjong had two Taesil : Agi taesil(shrine for baby's umbilical cord) and Gabong taesil. The first Agi taesil was created on Taebong of Mt. Seonseok in Seongju on November 26, 1441, but was moved to Mt. Beomnim in Seongju in 1451 to form the second Agi taesil. In 1458, King Sejo eliminated his Taesil. The stone structures of Gabong taesil still remains on Taebong of Mt. Beomnim, so it has been assumed that King Danjong established them during his reign (1452-1455). 2. Taesil in Sacheon has been known as King Danjong's Taesil because of King Danjong's reinstatement during the reign of King Sukjong. His Taesil was repaired with the reinstatement and King Sukjong was mistaken that Taesil in Sacheon was King Danjong's Taesil to fix it. The time of restoration has been assumed to be soon after the restoration of King Danjong's tomb (1699-1719). Taesil is missing the book of records and rails around the stone structure because the tombs of reinstated kings were restored without rails. 3. It is incorrect that Taesil in Sacheon was known as King Danjong's Taesil, It has been concluded that this Taesil was for Prince Inseongdaegun who was born in 1462. I focused on the fact that Prince Inseongdaegun's Taesil was in Seosamneung Taesil instead of King Danjong's Taesil. When Yiwangjik stored King Danjong's Taesil in Seoul in 1928 and moved it to Seosamneung in 1930, he found that the epitaph on the tombstone recorded that it was Prince Inseongdaegun, not King Danjong, and created Prince Inseongdaegun's Taesil in Seosamneung. I referred to "Taebong", which was created when Seosamneung Taesil was built during the Japanese imperial rule over Joseon, and the relics found in Taesil in Sacheon and Seosamneung.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.2 s.26
• /
• pp.15-19
• /
• 1979

• Proceedings of the Korean Fiber Society Conference
• /
• 1986.06a
• /
• pp.23-23
• /
• 1986

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06b
• /
• pp.33-33
• /
• 1987

• Restorative Dentistry and Endodontics
• /
• v.33 no.6
• /
• pp.553-559
• /
• 2008

The purpose of this research was to compare the microtensile bond strength of resin coated surface and resin inlay according temporary filling materials prior to applying self-adhesive resin cement. Caviton(GC, Japan), Provifil(Promedica, Neumunster, Germany), Provifil(Promedica, Neumunster, Germany) & petrolatum, and Eugenol-based cement, Tembond(Kerr, Orange CA, USA) were used as temporary filling materials. After fabrication of Tescera(Bisco, Schamburg IL, USA), it was bonded with a self-adhesive resin cement, Rely X unicem(3M, St. Paul. Minn, USA). After this procedure, the microtensile bond strength was measured and it was analyzed through one-way ANOVA and Duncan test(p<0.05). Caviton(GC, Tokyo, Japan) showed statistical difference except for the control(group I) and the saliva(group II)(p<0.05). Provifil(group IV), Provifil & petroneum(group V), Tembond(group VI) had lower microtensile bond strength.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.363-373
• /
• 1973

The Sewability was tested with the seam strength and Puckering Grade by a general sewing machine according to some properties of simulated Leather, yarn tensile strength needle and stitches. The main results tested are as follows ; 1. The thick and uncomfortable leather is unable to be sewed by a general sewing machine, but the thin and soft one is able to. 2. The interval between stitches depends on type of leather used, and the variance in accordance with type of leather varies much more in the case of narrower interval. 3. When the sewability of leather-surface is not so good, is desirable to pour oil on the surface for the purpose of better efficiency. 4. The seam strength is directly proportional to interval of stitch and tensile strength of yarn and leather used, and needle No. 14 is more effective than No.1l. 5. The more the soft and thin leather is, the lower the Puckering Grade becomes. Type of yarn and interval of stitches do not seem to effect the Puckering Grade.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.971-979
• /
• 1999

The experiment was conducted on five different kinds of fabrics dyed with loess. The sewability of fabrics dyed with loess by measuring the maximum needle piercing forces(MPF) through fabrics has been studied, MPF measurement using tensile tester was done 60 times for each fabrics at fixed low speed of 300mm/min. The nature of the loess on the dyed fabrics was physically jammed betweenthe fibers or adhered to the surface of fibers in the form of the fine particles so that the MPF through fabrics increases extremely in proportion to the increase of loess uptake and the plying number of fabrics dyed with loess. This results indicate that the MPF through fabrics is affected by mean value of the coefficient of friction on the surface of fabric(MIU) and cloth cover factor(Kc) in this experiment. Fabric was finished with softner to decrease the MPF during sewing operation, The MPF through softner finished fabric was decreased remarkably.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.998-1006
• /
• 1999

This study has investigated the relation between the sewing speed and seam breaking strength applied perpendicular to the seam direction. Breaking strength efficiency breaking mode of seams were examined under various sewing conditions using three kinds of sewing threads and four kinds of fabrics. The results obtained are as follows : 1. According to the increase in sewing speed seam strength was remarkably decreased. Seam strength and its loss difference were shown variously as threads and fabrics were mixed. 2. In case of fabrics with higher strength seam strength showed higher. And the seam strength was determined by the loop strength. 3. In case of fabrics with lower strength seam strength and its difference for every sample showed lower. So the strength of fabrics dominated the seam strength than those of threads. 4. In the experiment using various fabrics and sewing threads there was a type of thread appropriate to each fabric. Fabrics and threads with have similar physical properties were shown proper seam efficiency. 5. The breaking mode was different for every sample seam that was tested.

• The Journal of the Korean dental association
• /
• v.20 no.11 s.162
• /
• pp.929-932
• /
• 1982

Calcium Hydoxide는 치수복(pulp capping), 생활치수절단술(vital pulpotomy)등에서 bactericidal effect 때문에 많은 사용을 하고 있으며, 최근에는 무수치(pulpless teeth)와 관련된 치근단병소가 있는 경우, 미완성치근단인 경우, 치근흡수, 횡주치근파절(Transverse root fracture)등의 경우에서도 Ca(OH)₂paste를 사용하여 성공적인 근관치료를 할 수 있다. 근관의 instrumentation 과 irrigation후 근과 dressing 은 약 1주일간 행하고 Ca(OH)₂paste를 건조된 근관내에 넣는다. 이때 치근단(root apex)으로부터 약 3~5mm 되게 저속으로 아주 가볍고 부드러운 압력을 가하여 Ca(OH)₂paste를 cotton pellet로 밀어넣고 Sealing(가봉)한다. 이 Temporary sealing은 1개월이상 견딜수 있도록 Cement 또는 Amalgam filling 함이 좋다. Ca(OH)₂paste의 제법은 normal irrigating agents 와 minimal filing으로 시행한다.