• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.476-479
• /
• 1999

일반적으로 3상 PWM AC/DC 컨버터는 정상상태 에러 제거 및 빠른 과도응답 특성을 얻기 위해 동기 좌표계상으로 모델링하여 제어한다. 그러나 이와 같은 제어기는 입력전압이 평형일 경우를 전제조건으로 하므로, 입력전원이 불평형인 경우 입력전류와 출력전압에 고조파 성분이 나타나게 된다. 본 논문에서는 전원전압을 동기좌표계상의 정/역상 분으로 분석한 후 두 축(D, Q)의 역기전력 보상성분을 전원전압의 상태에 따라 적절하게 가변하고, 무효 전력과 고조파 전력 성분을 선택적으로 제거함으로써 입출력 시스템의 역률 및 고조파 성분을 효과적으로 보상하기 위한 간단하면서도 효과적인 제어기법을 제안하고, 시뮬레이션과 실험을 통하여 검증하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1104-1109
• /
• 2010

This paper deals with the attitude control of an underactuated spacecraft that has fewer than three actuators. Even though such spacecrafts are known as uncontrollable, restricted missions are possible with controlling two-axis attitude angles. A variable speed control moment gyroscope is considered as an actuator. It is a kind of momentum exchange device and it shows highly nonlinear dynamical properties. Speed commands are generated by kinematic equations represented by Euler angles. A control law, that is designed to make a spacecraft follow the speed commands, is derived by the backstepping method. Angular speeds are estimated from the attitude measurements. Several estimation methods have been compared.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.5
• /
• pp.788-797
• /
• 1995

In this paper, a variable time-scale modification using SOLA(Synchronized OverLap and Add) is proposed, which takes into consideration the different time-scaled characteristics of voiced and unvoiced speech, Generally, voiced speech is subject to higher variations in length during time-scale modification than unvoiced speech, but the conventional method performs time-scale modification at a uniform rate for all speech. For this purpose, voiced and unvoiced speech duration at various talking speeds were statistically analyzed. The sentences were then spoken at rates of 0.7, 1.3, 1.5 and 1.8 times normal speed. A clipping autocorrelation function was applied to each analysis frame to determine voiced and unvoiced speech to obtain respective variation rates. The results were used to perform variable time-scale modification to produce sentences at rates of 0.7, 1.3, 1.5, 1.8 times normal speed. To evaluate performance, a MOS test was conducted to compare the proposed voiced/unvoiced variable time-scale modification and the uniform SOLA method. Results indicate that the proposed method produces sentence quality superior to that of the conventional method.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.467-472
• /
• 2005

Characteristics of a Modified regenerative cycle gas turbine has been investigated. In the cycle, the turbine expansion is divided into two parts and the regenerator locates between them. Two types of mechanical design are assumed: two-shaft and single-shaft. In particular, optimal pressure ratio division between the high and low pressure turbines is evaluated for the single shaft configuration. The part load analyses have been carried out with the aid of off-design models. In addition to the general fuel only control, a variable speed control is assumed as the part load operating strategy of the single shaft configuration. Obvious advantage with the alternative cycle is observed in the variable speed operation of the single shaft design.

• Speech Sciences
• /
• v.3
• /
• pp.167-176
• /
• 1998

Conventional time-scale modification methods have the problem that as the modification rate gets higher the time-scale modified speech signal becomes less intelligible, because they ignore the effect of articulation rate on speech characteristics. Results of research on speech perception show that the timing information of transient portions of a speech signal plays an important role in discriminating among different speech sounds. Inspired by this fact, we propose a novel scheme for modifying the time-scale of speech. In the proposed scheme, the timing information of the transient portions of speech is preserved, while the steady portions of speech are compressed or expanded somewhat excessively for maintaining overall time-scale change. In order to identify the transient and steady portions of a speech signal, we employ a simple method using LPC cepstral distance between neighboring frames. The result of the subjective preference test indicates that the proposed method produces performance superior to that of the conventional SOLA method, especially for very fast playback case.

• Tribology and Lubricants
• /
• v.17 no.6
• /
• pp.426-434
• /
• 2001

The hermetic reciprocating compressor driven by the BLDC motor rotating with variable speeds, is modelled and analyzed for dynamic characteristics. The governing equations of piston, connecting rod and crank-shaft of the reciprocating compression mechanism and characteristics of driving torque of the motor are obtained. Dynamic behavior of the crankshaft supported on 2 journal bearings is analyzed considering compression load and eccentric unbalance for the 4 rotating speeds of crankshaft. And. reaction forces generated from oil film in the journal bearings are analyzed under transient condition using Reynolds' equation. To take into account the dynamic characteristics depending on the variable rotating speeds, comparison on the dynamic behavior of crank-shaft is made for the 4 operating modes of the compressor. Results show that the magnitude of crankshaft locioperating on the lower rotating speeds is more larger than the higher ones due to reduction of inertia force of the reciprocating piston.

• 전기의세계
• /
• v.42 no.3
• /
• pp.37-44
• /
• 1993

지금까지 디지탈 의료 영상압축의 기술동향의 유손실 방식과 무손실 방식으로 나누어 설명하였고, 앞으로의 의료영상 압축에 대한 기술개발 방향을 제시하였다. 유손실 압축방식으로 벡터양자화와 연속조 영상의 국제 표준압축방식인 JPEG을 사용한 의료영상 압축방식을 설명하였고 무손실 방식으로 가변 Run Length방식, DPCM방식, 계층적 방식 및 산술부호화를 간략하게 기술하였다. 또한 각 방식마다 일반적인 연속조 영상과는 달리 디지탈 의료영상을 압축할때 고려해야 될 의료영상의 특성을 살쳐보았고 압축 실험결과를 근거로 성능도 분석하였다. 의료영상을 유손실 방식으로 압축한 경우 회소당 1비트이하의 고압축을 얻을 수 있었지만 진단을 위한 사용 가능성을 아직 명확하지 않다. 반면 무손실 방식으로 압축한 경우 회소당 2-3.51트의 다소낮은 압축률을 보였지만 진단에 적합한 무손실이란 장점을 최대한 살릴 수 있어 현재 무손실 방식의 압축률을 향상시키려는 연구가 진행되고 있는 추세이다.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.64-68
• /
• 2005

The aim of this study is to reconstruct neighborhood public space appropriating for the contemporary society. The rapid development of technology has brought a number of changes to society. People's way of thinking has changed and the requirements about space has become more complex. At the urban neighborhood park, although multiple groups of citizens showed various activities, the program and structure of urban park are too fixed to support their activities. Therefore, strategy and flexible devices are needed to activate and stimulate the multi-user's complex activities. Through the case of Hong-Ik children's park, I will analyze the result of investigation about the pattern of space-user and suggest neighborhood public facilities proper to contemporary situation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.315-318
• /
• 2006

포항풍력에너지연구소에서는 에너지 관리공단의 지원으로 2004년부터 풍력터빈 KBP-2000M에 사용될 발전기를 개발해 오고 있다. KBP-2000M에 사용되는 발전기는 기어비가 24인 기어박스를 가진 가변속도형식의 발전기이다. 발전기의 직경은 1.87m 이고 축 방향의 길이는 1.288m 로 영구자석을 사용하여 여자하는 형식으로 설계되었다. 이러한 설계는 풍력발전기에서 요구하는 주요 요구조건인 고효율, 고 신뢰성을 만족시키기 위해서 매우 중요하다 이 보고에서는 발전기의 물리설계에서 얻어진 사양을 기준으로 하여 열 해석에서 얻어진 열 손실을 이용하여 냉각시스템 설계를 하였으며 펌프 및 라디에이터 선정에 관해서 논의한다.

• Journal of KIISE:Databases
• /
• v.33 no.4
• /
• pp.372-383
• /
• 2006

Among the approaches to image database management, content-based image retrieval (CBIR) is viewed as having the best support for effective searching and browsing of large digital image libraries. Typical CBIR systems allow a user to provide a query image, from which low-level features are extracted and used to find 'similar' images in a database. However, there exists the semantic gap between human visual perception and low-level representations. An effective methodology for overcoming this semantic gap involves relevance feedback to perform feature re-weighting. Current approaches to feature re-weighting require the number of components for a feature representation to be the same for every image in consideration. Following this assumption, they map each component to an axis in the n-dimensional space, which we call the metric space; likewise the feature representation is stored in a fixed-length vector. However, with the emergence of features that do not have a fixed number of components in their representation, existing feature re-weighting approaches are invalidated. In this paper we propose a feature re-weighting technique that supports features regardless of whether or not they can be mapped into a metric space. Our approach analyses the feature distances calculated between the query image and the images in the database. Two-sided confidence intervals are used with the distances to obtain the information for feature re-weighting. There is no restriction on how the distances are calculated for each feature. This provides freedom for how feature representations are structured, i.e. there is no requirement for features to be represented in fixed-length vectors or metric space. Our experimental results show the effectiveness of our approach and in a comparison with other work, we can see how it outperforms previous work.