• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.117-122
• /
• 2000

풍력발전시스템은 일정속과 가변속 풍력발전시스템으로 나누어진다. 일정속 풍력발전시스템은 유도발전기를 이용한 시스템이 주종을 이루고, 가변속 풍력발전시스템은 동기발전기-인버터로 이루어진다. 본 논문에서는 피치컨트롤이 장착된 두 시스템을 분석하여, 피치컨트롤의 제어 알고리즘을 유도하고 공기역학적 출력제어 국면에서 두 시스템의 출력제어를 비교 분석하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.610-617
• /
• 2005

A variable speed wind turbine simulation model for grid connection is developed based on PSCAD/EMTDC. The model consists of wind model, rotor dynamics, synchronous generator, power converter, transformer, distribution line and infinite bus. Implementation of blade characteristics and power converter control strategies are included. Several transient case studies are performed including wind speed change, local load change and grid-side voltage unbalance using developed simulation model. The results of this work can be utilized for study of actual interaction between wind turbine and grid for reliable operation and protection of power system.

• Electric Engineers Magazine
• /
• v.246 no.2
• /
• pp.38-41
• /
• 2003

풍력발전시스템에서 전기설비는 발전기를 위시하여 인버터, 변압기 및 변전시설과 기타 제어시스템으로 구성된다. 최근에 와서 대형 풍력터빈은 풍력 이용의 극대화를 위하여 가변속 풍력터빈이 채용되고 있다. 이에 따라 대형 발전기의 전압및 경제적인 측면에서 높은 전압의 기술 및 경제적인 측면에서 높은 전압의 채용이 불리함으로 저압을 채용할 수 밖에 없어 전력계통에 연결하기 위해서는 수십로 승압하며 중대형 풍력단지에서는 개별 풍력발전기에서 승압된 전력을 모아 이를 다시 특고압 변압기로 승압하여 대전력계통에 연결하게 된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.370-373
• /
• 2007

For the development of wind turbine, generally simulator is used. Simulator include wind turbine components. e.g blades, pitch and pitching method, rotor, yaw system, tower, drive train and so on. Few the more, it include a external circumstance. e.g wind speed, wind direction, air density. these basic parameters be used for the control of wind turbine by wind turbine controller in wind turbine simulator. The wind turbine controller can be designed in the wind turbine simulator. But a developer must make the real control system that will be made using PLC or PC or other processor. The developer must verify the function of control system. that is control algorithm , I/O function, communication, sequence and so on. This verification is possible if we substitute the real wind turbine control system for wind turbine controller in the simulator.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.69-74
• /
• 2010

In a grid connected variable speed wind turbine, the PCC voltage and the wind power fluctuate as the wind velocity changed. And this voltage variation is changed due to location of PCC. This paper calculate the value of PCC voltage variation which is proportional to the product of the line impedance from the ideal generator to the PCC and the wind turbine output current. And to reduce this PCC voltage variation, this paper calculate the required reactive power analytically using the vector diagram method. Output reactive current is changed, if the reactive current is limited by inverter capacity or grid code have the margin of voltage variation. If the grid connected inverter is controlled by proposed algorithm, the PCC voltage variation is minimized though the wind turbine output change at random. To verify calculated voltage variation and required reactive power, this paper utilized Matlab and PSCAD/EMTDC simulation and real small wind turbine and power system in Sapsido, island in the Yellow Sea.

• KIPE Magazine
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2006

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.349-360
• /
• 2006

Controller for doubly-fed induction-type wind generation system should be designed with mechanical power on blade. The controller in this paper consists of upper level controller and lower level controller. The upper level controller determines operating modes according to mechanical input power and calculates proper reference values. There are 4 operating modes - minimum speed control, variable torque control, torque limit control and idle mode. The lower level controller performs current regulated PWM control of rotor-side converter and grid-side inverter. A wind turbine simulator is implemented using doubly-fed induction-type generator and DSP based back-to-back converter to verify the performance of designed controller experimentally.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.10a
• /
• pp.248-255
• /
• 1998

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.397-404
• /
• 2004

This paper proposes a variable speed control scheme of grid-connected wind power generation systems using cage-type induction generators. The induction generator is operated in indirect vector control mode, where the d-axis current controls the excitation level and the q-axis current controls the generator torque, by which the speed of the induction generator is controlled according to the variation of the wind speed In order to produce the maximum output power. The generated power flows into the utility grid through the back-to-back PWM converter. The line-side converter controls the dc link voltage by the q-axis current control and can control the line-side power factor by the d-axis current control. Experimental results are shown to verify the validity of the proposed scheme.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.219-228
• /
• 2005

본 연구에서는 에너지 및 환경에 대한 문제가 대두되면서 기술 개발의 필요성이 높아지고 있는 풍력발전시스템에 대하여 750kW급 Geared Type 가변속 풍력 발전시스템을 개발하였다. 풍력발전시스템이 급속히 대용량화됨을 고려하여 MW급의 기술 조합이 반영되도록 설계하였으며, 베어링과 같은 국내 인프라가 부족한 구성품을 제외한 모든 구성기기들을 자체 설계/제작하였다. 블레이드는 국내 풍황에 적합하도록 자체 에어포일을 설계하여 개발하였으며, 가변속 제어를 위한 이중 여자 유도발전기 및 제어기와 Down sizing 구현을 위한 유성 및 헬리컬 기어 혼합형 증속기를 개발하여 시동 풍속 3.5m/s, 정지 풍속 25m/s, 정격 풍속은 12.7m/s이며 IEC 61400-1의 Class I 에 준한 750kW급 풍력 발전시스템을 개발하였다.