• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.433-442
• /
• 2021

In this study, the properties of no-fines polymer concrete with different polymer binder contents were evaluated. The polymer concrete was formulated using a polymeric binder (unsaturated polyester resin), fly ash, and recycled coarse aggregate (60%) and crushed coarse aggregate (40%). The polymeric binder content (4.0-6.0wt.%) was used as an experimental variable because it dramatically affects both the cost-effectiveness and material properties. The results showed that the density, compressive strength, flexural strength both before and after exposure to freezing and thawing increased as the polymer binder content increased, while the absorption, void ratio, permeable voids, coefficient of permeability, and acid resistance (mass loss by acid attack) decreased as the polymeric binder content increased. In particular, even though the void ratio was 18.4% and the water permeability coefficient was 7.3mm/sec, the compressive strength and flexural strength were as high as 38.0MPa and 10.0MPa, respectively, much more significant than those of previous studies. Other properties such as absorption and acid resistance were also found to be excellent. The results appear to be rooted in the increased adhesion of the binder by adding a cross-linking agent and the surface hydrophobicity of the polymer.

• Membrane Journal
• /
• v.31 no.3
• /
• pp.228-240
• /
• 2021

The organic solvent robust polybenzimidazole (PBI) membranes were prepared as organic solvent nanofiltration (OSN) membrane for the recycling of alcoholic solvents using non-solvent induced phase separation with different dope solution concentration and coagulant composition of water/ethanol mixtures to control the membrane morphology and permeation performance. Investigation on crosslinking of polybenzimidazole indicated that the membrane crosslinked with dibromoxylene (DBX) had enough mechanical strength and solvent resistance to be applied as a OSN membranes. The crosslinked PBI membrane prepared by more than 20wt% dope concentration coagulated in water showed a rejection of > 90% to Congo Red (MW of 696.66 g/mol) while pure ethanol permeances was more than 22.5 LMH/bar at 5 bar. Investigation on coagulant composition indicated that ethanol permeance through crosslinked PBI OSN membrane increased with increasing of ethanol concentration in water/ethanol mixture coagulants.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.45-51
• /
• 2023

In order to improve the durability of the PEMFC(Proton Exchange Membrane Fuel Cells) polymer membrane, a radical scavenger and a support are used. In this study, the durability of membranes containing fucoidan extracted from seaweeds and tannic acid serving as a crosslinking agent is evaluated to improve chemical and physical durability. Physical durability is evaluated by measuring tensile strength, and chemical durability is measured by Fenton experiment. Membrane and electrode assembly (MEA) is prepared and mechanical and chemical durability are measured through accelerated durability evaluation in the cell. The tensile strength measurement showed that fucoidan and tannic acid can improve the mechanical durability of the membrane by improving the strain rate and yield strength. It is shown in Fenton experiment that fucoidan acts as a radical scavenger. As a result of the accelerated durability test in the unit cell, fucoidan improved both chemical and mechanical durability, increasing the accelerated durability evaluation time by 38.1% compared to the additive-free membrane. When tannic acid is added, the durability of the polymer membrane is improved by 13.9% by improving the mechanical durability.

• Journal of Teachers' Pension
• /
• v.2
• /
• pp.47-102
• /
• 2017

오늘날 대다수의 선진 국가들은 고령화 사회에 대비하여 자국의 노후소득보장 제도를 대대적으로 개혁해 오고 있다. 우리나라의 경우에서도 지난 2015년 사학연금제도의 개혁이 이러한 취지에 해당될 수 있을 것이다. 본 연구에서는 고령화 사회의 문제가 단순히 노인부양비용의 증가 그 자체가 아니라, 평균수명의 증가에도 불구하고 늘어나게 된 노후의 삶에 대한 시간적 배분이 근로와 여가에 걸쳐 균형적으로 이루어지지 않고, 사회적 부양을 필요로 하는 노후의 여가만 일방적으로 늘어나고 있다는 점을 문제점으로 지적하였다. 따라서 이러한 차원에서 볼 때 고령화 사회의 문제는 생애근로기간의 연장을 통해서만 효과적으로 극복할 수 있을 것으로 생각된다, 하지만 이와는 반대로 개인별로 건강상태나 가족상황 등의 이유로 생애근로주기의 연장이 불가능한 사람들을 위하여 별도의 제도적 장치가 추가적으로 마련되어야 할 것이다. 종합해 보면, 고령화 사회의 노동시장 문제는 개인별로 다양한 욕구나 능력을 반영하여 각자에게 다양한 선택권을 보장해 줄 수 있는 방향으로 개선되어야 할 필요가 있다. 본 연구에서는 고령화 사회에 대비하여 연금수급연령 상향조정의 필요성을 사학연금제도를 중심으로 살펴보고, 대신 그로 인해 발생할 수 있는 소득공백문제와 연금가입경력 공백문제 등 제반의 충격을 흡수할 수 있는 제도적 장치로서 점진적 퇴직제도의 도입방안을 제안하였다. 개략적으로 사학연금제도에 있어서 점진적 퇴직모형은 법정연금수급연령의 인상 일정에 따라 다음과 같이 운영하는 방안을 제안하였다. 먼저 법정연금수급연령이 60세로 유지되는 2022년까지의 단기적 대책으로서 여기서 점진적 퇴직의 자격연령은 모든 가입자에게 60세로 적용하도록 한다. 이 경우 가입자들의 신분구분에 따라 각각 교수 5년, 교원 2년(문제해결에 대한 정책적 의지에 따라 이행구간을 확장할 수도 있음) 그리고 교직원 0년의 조기의 점진적 퇴직이 허용되므로, 현재 교원이나 교수의 임용대란문제에 효과적으로 대응을 할 수 있는 장점이 있다. 다음으로는 2023년 이후 2033년 사이 법정연금수급연령의 인상단계에 해당되는 기간 동안의 대책으로서 여기서는 교수, 교원, 교직원에게 적용되는 정년연령과 매년도 법정연금수급연령 사이의 기간을 조기의 점진적 퇴직 이행구간으로 정하도록 한다. 그리고 이러한 이행구간에 상당하는 기간만큼 후기의 점진적 퇴직 이행구간을 별도로 설정하여 그에 적절한 혜택이 주어질 수 있도록 한다. 마지막으로 2033년 이후부터는 교수, 교사, 교직원의 신분구분 없이 모두에게 적용되는 사항으로서 65세를 기준으로 그 이전의 5년은 사학연금의 적용을 받는 조기의 점진적 퇴직 그리고 그 이후의 5년은 국민연금의 적용을 받는 후기의 점진적 퇴직이 이루어질 수 있도록 한다. 그리고 전체 10년의 점진적 퇴직 이행구간 동안 개인별로 퇴직시점이나 퇴직형태의 선택이 자유롭게 이루어질 수 있도록 하기 위하여 보험수리의 원칙에 입각한 감액률 또는 가산율의 엄격한 적용을 제안하였다. 그리고 고령계층이 자신의 근로시간을 단계적으로 단축할 수 있도록 하고, 그 과정에서 발생하게 되는 소득의 감소부분은 별도의 제도적 방법(가교연금, 시간가치적립계정 등)으로 충당하도록 하는 방안을 제안하였다. 나아가 점진적 퇴직제도의 운영방식은 근로시간의 단축뿐만 아니라 작업부담의 경감 등에 대해서도 인정을 해주도록 해줌으로써 임금피크제도의 기능과 연계가 가능할 수 있도록 할 것을 제안하였다.

• Elastomers and Composites
• /
• v.37 no.4
• /
• pp.224-233
• /
• 2002

This study has investigated the flame retardant properties of EPDM rubber with the addition of various flame retardants. Carbon black, stearic acid, zinc oxide cross-linking agent were mixed with EPDM rubber to produce the base rubber E0 without the addition of flame retardants. Phosphorus flame retardant Tricrecyl phosphate(TCP) was added to E0 in 0.5, 1, 1.5, 2 phr to make E1~E4 samples and red phosphorus was added in 3, 6, 9, 12 phr to make E5~E8 samples. A flame retardant of the bromine family Decabromodiphenyloxide(DBDPO), and a chlorinated paraffin retardant of the chlorine family was added to E0 in 3, 6, 9, 12 phr to make E9~E12 and E13~E16 samples, repectively. Basic physical properties such as tensile strength, tear strength and hardness were measured for all the rubber samples with various flame retardant additions. There was no substantial differences. On the other hand, Oxygen index and UL94 were measured to study flame retardant properties. From oxygen index measurements E0 sample showed a value of 23.5%, indicating the improvement of flame retardant properties. Also from UL94 measurements, it was found that addition of red phosphorus resulted in maximum flame retardant effect. It was found that increasing the amount of addition resulted in decreasing combustion rate and improving flame retardant effect regardless of the kind of flame retardant.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.247-256
• /
• 2013

In this study, alginate beads containing birnessite (Bir-AB), a highly reactive oxidative catalyst for the transformation of phenolic compounds, was prepared and its 1-naphthol (1-NP) removal efficiency was investigated in a batch test. Based on scanning electron microscopy image, it can be inferred that the alginate gel cluster acts as a bridge which bind the birnessite particles together. Kinetic experiment with Bir-AB of different mixing ratios of birnessite to alginate (Bir : AG=0.25 : 1~1 : 1 w/w) indicate that pseudo-first order kinetic constants, $k(hr^{-1})$ for the 1-NP removals increased about 1.5 times when the birnessite mixing ratio was doubled. The removals of 1-NP was found to be dependent on solution pH and the pesudo-first order rate constants were increased from 0.331 $hr^{-1}$ at pH 10 to 0.661 $hr^{-1}$ at pH 4. The analysis of total organic carbon for the reaction solutions showed that a higher removal of dissolved organic carbon was achieved with Bir-AB as compared to birnessite. HPLC chromatographic analysis of the methanol extract after reaction of 1-NP with Bir-AB suggest that the reaction products could be removed through incorporation into the aliginate beads as a bound residue. Mn ions produced from the oxidative transformation of 1-NP by birnessite were also removed by sorption to Bir-AB. The Bir-AB was recovered quantitatively by simple filtration and was reused twice without significant loss of the initial reactivity.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.30-38
• /
• 2008

Petroleum-based resin adhesives have extensively been used for the production of wood panels. However, with the increase of manufacturing cost and the environmental issue, such as the emission of volatile organic compounds, of the adhesive resins, it is necessary to be developed new adhesive systems. In this study, the potential of okara, which is a residue wasted from the production of tofu, for the development of bio-based adhesives was investigated. At first, the physical and chemical properties of okara were examined. After okara was hydrolyzed in acidic and/or alkaline solutions, okara-based adhesive resins were formulated with the mixtures of the okara hydrolyzates and phenol formaldehyde (PF) prepolymer. The adhesive resins were used for the fabrication of plywood panels, and then the adhesive strength and formaldehyde emission of the plywood panels were measured to examine the applicability of the resin adhesives for the production of plywood panels. The solids content and pH of the okara used in this study were around 20% and weak acidic state, respectively. In the analysis of its chemical composition, the content of carbohydrate was the highest, and followed by protein. The shear strengths of plywood fabricated with okara-based resin adhesives exceeded a minimum requirement of KS standard for ordinary plywood, but its wood failure did not reach the minimum requirement. In addition, the formaldehyde emissions of all plywood panels were higher than that of E1 specified in the KS standard. Based on these results, okara has the potential to be used as a raw material of environmentally friendly adhesive resin systems for the production of wood panels, but further researches - biological hydrolysis of okara and various formulations of PF prepolymer - are required to improve the adhesive strength and formaldehyde emission of okara-based resin adhesives.