• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.261-271
• /
• 2000

Physical properties of NR vulcanizates cured by both sulfur and resole were studied. Cure characteristics of the compounds were also investigated. Two types of resoles with different molecular weight distributions were employed. The scorch time of the NR compound containing the resole with a low molecular weight distribution was shorter than that of the compound containing the resole with a high one. Crosslink densities of the NR vulcanizates with a high resole content after the thermal aging at $95^{\circ}C$ decreased, while that of the vulcanizate without resole after the thermal aging at $95^{\circ}C$ increased. Though crosslink densities of the NR vulcanizates with a high resole content decreased with increasing the aging time, the moduli increased while the tensile strength and tear strength decreased.

• Electrical & Electronic Materials
• /
• v.6 no.4
• /
• pp.354-360
• /
• 1993

열수축성 튜브 제조에 적합한 조성을 얻기 위하여 PVC의 방사선가교에 대하여 검토하였다. 중합도가 각각 다른 PVC에 가소제, 가교제를 변화시켜 배합한 혼합물을 방사선 가교시켰을 때 가교도는 가교제, 가소제, 중합도 및 조사선량이 증가됨에 따라 증가되었다. 가교제로서는 삼관능성 단량체가 높은 가교효율을 나타내었다. 가교 PVC 필름의 열수축성은 연신배율과 수축 온도를 높여줌으로써 증가되었으나 가교제 및 가소제의 증가량에 의한 열수축성의 증가는 나타내지 않았고 저중합도 PVC의 열수축성은 극히 저조하였다.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.182-189
• /
• 1990

Various crosslinked poly(4-vinylpyridines) having different degrees of crosslinking were prepared by radical copolymerizations of 4-vinylpyridine with N, N'-2, 6-pyridinebisacrylamide as a crosslinker. The abilities of these crosslinked polymers to bind methyl orange and butyl orange were investigated at various temperatures in a buffer solution of pH 7. The first binding constants were evaluated from the equilibrium binding amounts. The first binding constants against the temperatures showed bell-shaped curves. Also, the first binding constants against the degree of crosslinking showed bell-shaped curves. When the temperature and the degree of crosslinking of maximum binding in the curves of these binding systems were compared with those of previous systems containing crosslinked poly(4-vinylpyridines) prepared by using N, N'-methylenebisacrylamide, N, N'-tetramethy-lenebisacryamide and divinylbenzene as crosslinkers, respectively, they were varied with the crosslinked poly(4-vinyl pyridines) containing different crosslinkers. These results were discussed in terms of the properties of the crosslinkers.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.87-98
• /
• 2007

Generally, main girders and steel piers of temporary bridges form the steel rahmen structure. In this study, the rational stability design procedure for main members of temporary bridges was presented using a 3D system buckling analysis and second-order elastic analysis. Six types of temporary bridges, which can be designed and fabricated in reality, were chosen and the buckling design for them was performed in consideration ofload combinations of dead and live loads, thermal load, and wind load. Effective buckling length of steel piers, transition of 3D buckling modes, and effects of second-order analysis were investigated through a case study involving six temporary bridges.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.1-10
• /
• 1998

The temporary steel bridges which are constructed for detour and constructional expediency are consisted of H-beams(as superstructure) and H-piles(as substructure). Because these members are fastened by high-tension bolts, there are no expansion joints in these bridges. So, these kinds of bridges have no system which can relieve the excessive thermal stress. In this investigation, monitoring system was set up at temporary steel bridge and stress and temperature changes of H-beam are monitored. From these measured data, it is analyzed that the relationship between ambient and main-girder temperature change, between temperature and stress change. With these analyses, it is resulted that the thermal stress take main part of stress variation in this bridge and the restrain of thermal longitudinal displacement of H-pile. In addition, because the connection part of H-beam to H-beam is weak in the continuous spans, the sub-modelling is well apt to reflect the effect of thermal stress.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.50-55
• /
• 2006

When the monodisperse polystyrene(PS)/HDDA polymer particles were synthesized via one-step polymerization using polystyrene seed particles by dispersion polymerization, the effects of 1) the molecular weight of seed polymer particles, 2) the ratio of the absorbed HDDA to the seed polymer particles (swelling ratio) and 3) seeded polymerization rate on the surface morphology of PS/HDDA polymer particles were investigated. It was observed that the creation of the crater shaped defect on the surface of PS/HDDA polymer particles was irrespective of the molecular weight of seed polymer ant swelling ratio. But its surface morphology could be controlled by the change of the seeded polymerization rate.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.225-236
• /
• 1995

세가지 가교제 즉 황, tetramethyltyiuram disulfide (TMTD) 및 dicumyl peroxide(DCP)로 각각 가교시킨 카본블랙 충진 고분자 망상 시료들에 대해 일축연신 실험 을 통해 얻은 Mooney plot를 분석, 가교 탄성율 Gc와 엉킴 탄성율 Ge를 각각 구하였다. 각 가교계에 대하여 Gc를 통해서는 가교 사슬간의 평균분자량, 망상사슬과 카본블랙간 결합체 의 밀도 및 평균 면적 등을 Gc를 통해서는 카본블랙 첨가에 따른 관경비를 각각평가하였다. 황 가교제의 경우 Gc가 가장 높았으며 망상 사슬과 카본블랙간의 결합이 가장 잘 이루어졌 다. TMTD와 DCP가교제의 경우는 황의경우보다 카보블랙 입자와의 결합력은 낮았으나 결 합체들의 분포는 더욱 조밀하게 나타났다. 또한 Ge평가로부터는 TMTD 가교계가 카본블랙 충진에 의해 관경이 가장크게 증가함을 알수 있었다.

• Journal of the Korean Chemical Society
• /
• v.40 no.9
• /
• pp.640-648
• /
• 1996

Crosslinked chitosan was prepared from chitin after reaction with epichlorohydrin followed by deacetylation at C2-position. Epidermal releasing polymeric matrix was prepared after swelling crosslinked chitosan with distilled water and adding silver sulfadiazine and glycerine as a plasticiser. The release behavior of silver sulfadiazine from polymeric matrix was studied in pH 7.4 phosphate buffer solution by varing the drug content, glycerine concentration, and the thickness of the matrix. The drug release time was delayed by increasing the content of silver sulfadiazine and the thickness of the matrix, whereas decreased as glycerine concentration increased. The apparent constant(K) of release rate was independent upon the matrix thickness, but was proportional to the content of drug or glycerine of crosslinked chitosan matrix. These results indicated that chitosan matrix showed some potential as a drug delivery system for transdermal therapeutic application.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.508-515
• /
• 2002

The effects of the crosslinking caused by irradiation dose, molecular weights of the foaming materials, and various foaming processes on the foam structure of the polypropylene (PP) were investigated. The maximum gel content of the PP was 48% when the sheet was irradiated with 3.2 Mrad. This high gel content improved the cell structures by providing high thermal stability. The increase of both the gel content and structural development were stopped at the irradiation dose exceeding 3.2 Mrad. The increase of the molecular weights served to help produce a foam with particularly fine and even cell structures, along with improved thermal stability as well.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.1028-1034
• /
• 1995

Acid-modified and cross-linked chestnut starch properties and their gel properties were examined. Hardness and cohesiveness of acid-modified starch gels were all reduced as acid treatment time was increased. And hardness of crossed-linked starch gels were increased but cohesiveness were not significantly different. Reduction rate of transmittance in acid-modified starch suspensions were higher than that of unmodified starch suspension. Hardness changes of cross-linked starch gels during 4 days of storage were little, especially in the gels made at $75^{\circ}C\;and\;85^{\circ}C$ of heating temperatures.