• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.320-326
• /
• 1999

A small cartridge, with a nozzle system for washing off the dirt from the surfaces of sensing gates, was fabricated. The proposed nozzle structure was designed for cartridge by using the simulation tool of fluid (CFD-ACE). Whole size of the fabricated cartridge by using micromachining techniques is about $2.6\;cm{\times}1.5\;cm$, the size of the washing nozzle is $0.2\;mm{\times}0.6\;mm$ and its dead volume is only about $20\;{\mu}l$. A micro-reference electrode was achieved by employing a differential system with ISFETs/QRE (quasi-reference electrode)/REFET (reference field-effect transistor). Metal electrodes was deposited at both ends of blowing channel were used to check the presence of bubble in the microchannel. The pH-ISFET was inserted into the fabricated cartridge and the washing effect of the nozzle system in cartridge was invested.

• Journal of Sensor Science and Technology
• /
• v.9 no.5
• /
• pp.380-388
• /
• 2000

The finite element analysis of a micro turbine was made to investigate safety margin of its operating condition for the high aspect ratio nickel micro turbine blades fabricated by conventional LIGA-like method. From our study, we found that the fabricated turbine could not exceed its yield strength even if the pressure difference between inlet and outlet of turbine blade was about 44kPa, and the correlation of friction coefficient and the maximum stress, caused by contact friction between outer diameter of shaft and inner diameter of turbine blade, was somewhat reciprocal. The maximum stress was decreased with the increasing contact friction, when turbine blade was in its state of rotation. By the results of our study, we conclude that it is possible to fabricate metal micro turbine more easily han surface micromachining technology and to operate with no risk of metal structure's damage, which is caused by yield strength, if the operating condition with the design of micro turbine itself are optimized. It is useful to adopt other applications which have the contact problems between a moving part and the fixed one in micro structures.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.385-394
• /
• 1999

제품을 설계하는 디자이너나 엔지니어는 많은 시간과 노력을 들이지 않고서 그들이 설계한 3차원 제품 모델에 대한 사실적인 이미지를 원한다. 디자인 프로세스의 초기인 개념 설계에서부터 설계검증, 그리고 가공 과정에서 사실적인 이미지가 매우 유용하므로, 대부분의 주요 CAD 제작사는 그들의 CAD 소프트웨어에 고급 렌더링 기능을 추가하고 있다. 상용의 CAD/CAM 모델러에서는 NURB 곡면을 기초로 모델링을 수행하므로, NURB 곡면을 렌더링할 수 있는 패키지가 필요하다. VIF(Visual InterFace) 렌더링 라이브러리는 A-buffer 방식과 Ray tracing 방식의 두 가지 고급 렌더링 모드를 제공한다. 다각형은 물론 NURB 곡면을 입력으로 받아 사용자가 설정한 표면의 각종 계수, 원하는 view와 설정된 광원에 따라 이미지를 만들고 다양한 형태로 출력시킬 수 있는 다양한 기능을 제공한다. 본 논문에서는 VIF 렌더링 라이브러리에 대한 구조와 기능별로 분류된 함수에 대하여 설명하며, 실제로 CAD/CAM 시스템과 통합되어 구상설계에서부터 3차원 설계 모델링에 이르기까지의 제조공정에서 설계검증 툴로써 어떻게 활용되고 있는가에 대하여 기술한다.Abstract Engineers and industrial designers want to produce a realistic-looking images of a 3D model without spending a lot of time and money. Photo-realistic images are so useful from the conceptual design, through its verification, to the machining, that most major CAD venders offer built-in as well as add-on photo-realistic rendering capability to their core CAD software. Since 3D model is consists of a set of NURB surfaces in commercial CAD packages, we need a renderer which handles NURB surface as well as other primitives.A new rendering library called VIF (Visual InterFace) provides two photo-realistic rendering modes: A-buffer and Ray tracing. As an input data it takes NURB surfaces as well as polygonal data and produces images in accordance with the surface parameters, view and lights set by user and outputs image with different formats. This paper describes the overall architecture of VIF and its library functions classified by their functionalities, and discusses how VIF is used as a graphical verification tool in manufacturing processes from the conceptual design to 3D modeling.

• Journal of Dairy Science and Biotechnology
• /
• v.26 no.2
• /
• pp.51-56
• /
• 2008

Using central composite design, we have designed optimization of the manufacturing of processed butter. And response surface analysis by least-square regression was used Statistical Analysis System(SAS). Central composite design can be achieved by response surface techniques that allow flexibility in modeling and analysis. Response surface methodology(RSM) was used to optimize hardness(%) using as independent variables; the content of butter($X_1$), ranging from 50 to 90(%), the content of soybean oil($X_2$), from 0 to 20(%), and the hydrogenated soybean oil($X_3$) from 0 to 4(%). The results on the regression coefficients calculated for overrun by response surface by least-square regression(RSREG) were followed. It was considered that the linear regression was significant(p<0.01). As for the processed butter, the regression model equation for the hardness(Y, %) to the change of an independent variable could be predicted as follow: $Y=60.88-8.92X_2-{29.3X_2}^2$. The optimal for the manufacturing of processed butter were determined at the content of butter of 88.22%, soybean oil of 6.71% and hydrogenated soybean oil of 2.36%, respectively. Optimum compositions were resulted in hardness of 65.78 N. Finally the reference sample(Butter in the morning, Seoul Dairy Co-op.) and processed butter manufacturing under the optimal conditions were compared with spreadability test. The spreadability scores result from reference sample and butter under optimal conditions was not found a significant difference.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.731-744
• /
• 2006

The present study was performed to evaluate the effect of tetracycline-HCl on the change of implant surface microstructure according to application time. Implant with pure titanium machined surface, HA-coated surface and dual acid etched surface were utilized. Implant surface was rubbed with $50mg/m{\ell}$ tetracycline-HCL solution for ${\frac{1}{2}}$min., 1min., $1{\frac{1}{2}}$min., 2min., and $2{\frac{1}{2}}$min. respectively in the test group. Then, specimens were processed for scanning electron microscopic observation. The results of this study were as follows. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two groups. 2. In HA-coated surfaces, round particles were deposited irregularly. The roughness of surfaces conditioned with tetracycline-HCL was lessened and the cracks were increased relative to the application time. 3. The etched surfaces showed the honey comb structures. The surface conditioning with tetracycline-HCI didn't influence on its micro-morphology. In conclusion, the detoxification with $50mg/m{\ell}$ tetracycline-HCI must be applied respectively with different time according to various implant surfaces.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.307-315
• /
• 1989

In this paper, we have analyzed the temperature variation trend of a slab on between the process of reheating furnace and the termination of roughing mill process during hot rolling process. 1) cooling by radiation and convection current in the air, 2) plastic deformation heat, 3) cooling by descaling water, 4) cooling by contact with rolling rolls and/or transmitting rolls. For the analysis, the factors have been adopted as the problems of the rolling process to be solved such that we have established an application technique in relation to the determination of boundary conditions on the slab surface. We have presented a procedure for an analysis of the cooling phenomenon treated as a problem of two-dimensional transient heat flow using finite difference equation and suggested techniques of implementing sequentialized rolling tasks in correlation with the procedure. From the result of simulation, it is shown that the difference between calculation value and measurement value is within the range of the industrial measurement error. Also, it is proved that the assumptions, conditions, and properties used in the computer simulation is appropriate by showing that the pattern of a drop in temperature at each rolling event is in accord with real circumstances.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.297-297
• /
• 2011

일반적으로 고출력 반도체 레이저 다이오드는 발진 파장 및 광출력에 따라 다양한 분야에 응용되고 있으며, 특히 발진파장이 808 nm 대역인 고출력 레이저 다이오드의 경우 재료가공, 펌핌용 광원, 의료 분야 등 다양한 응용분야를 가진 광원 중의 하나라고 할 수 있다. 808 nm 대역의 레이저 다이오드 제작에는 현재 InGaAsP/InGaP/GaAs 및 InGaAlAs/GaAs 양자우물을 이용하여 제작되고 있으나 양자우물과 이를 둘러싸는 장벽물질간의 band-offset이 적어 효율적인 고출력 레이저 다이오드의 제작에 다소 어려움이 있기 때문에 강한 캐리어 구속 효과를 지니는 양자점 혹은 양자대쉬 구조를 사용하는 것이 고출력 레이저 다이오드를 제작할 수 있는 한 방법이다. 실험에 사용된 InP/InGaP 양자구조는 Riber사의 compact21 MBE 장치를 사용하여 성장하였으며 GaAs기판을 620-630도에서 가열하여 표면의 산화층을 제거하고 580도에서 약 100 nm 두께의 GaAs 버퍼층 및 50 nm 두께의 InGaP층을 성장하였다. 양자 구조는 MEE (migration enhanced epitaxy) 방식으로 성장되었는데, 이는 InP/InGaP 의 lattice mismatch율이 작아 양자 구조 형성이 어렵기 때문에 InP/InGaP 양자 구조 성장에 적합하다고 생각하였으며, Indium 2초, growth interuption time 10초, phosphorous 2초 그리고 growth interuption time 10초를 하나의 시퀀스로 보고, 그 시퀀스를 반복하여 양자 구조를 성장하였다. 본 실험에 사용된 P 소스는 Riber사의 KPC-250 P-valved cracker모델을 사용하였으며 InP의 성장률은 0.985${\AA}/s$이다. InP/InGaP 양자구조 성장 중에, 성장 온도, 시퀀스 수의 변화 등 다양한 조건을 변화 시켜 샘플을 성장시켰고, 양자 구조 성장을 확인하기 위하여 AFM 및 SEM을 통해 구조적 분석을 하였으며 PL 측정을 통해 광학적 분석을 진행하였다.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.417-427
• /
• 2010

This study is to examine the manufacturing technique based on scientific investigation and analysis on Steel-Plated Jewel Beetle's Adornment gilt-bronze openwork remains excavated from No. 100 site at Hwango-dong Gyeongju. As a result of the investigation on the manufacturing revealed that riveting was adopted to connect gilt-bronze openwork plates and steel plates, followed by mercury amalgam plating method and carving of the patterns by means of the dotted line engraving technique. There were some traces on the surface of Jewel Beetle wings that show the use of pins for fixing, which seems to be the result of recycling or processing. The sectional analysis shows the high possibilities that varnishing with lacquer was adopted for wing adhesion, and it was confirmed that varnishing with lacquer was used on the strap pendant plate to prevent corrosion.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.171-171
• /
• 2003

발아현미란 적당한 온도와 수분, 산소 등을 공급해 현미의 싹을 1~5 mm까지 발아시킨 것으로 현미의 영양과 기능을 극대화시키면서 식미는 현미보다 훨씬 부드러운 쌀이다. 발아현미 등 발아곡식이 주목받기 시작한 것은 1993년 독일의 한 식품연구소에서 곡식의 발아시 발아전에는 없던 새로운 영양성분이 생겨나거나 증가한다는 연구발표가 계기가 되었다. 현미에는 식물성 섬유질을 비롯한 각종효소, 비타민, 미네랄 등 영양소가 다량 함유되어 몸에 좋다는 것은 널리 알려진 사실이다. 그러나 현미가 갖는 뛰어난 효능에도 불구하고 백미를 주식으로 하고 있는 이유는 현미의 조리가 어렵고 부드럽게 씹히지 않고 꺼칠하여 식미가 떨어지기 때문이다. 이러한 현미의 문제점을 개선하여 풍부한 영양을 고루 섭취하고 간편한 취사와 부드러운 조직감으로 식미 기호도를 높인 발아현미가 등장하였다. 따라서, 찹쌀과 멥쌀 발아현미에 대한 영양성분과 품질특성을 조사하여 발아현미밥 및 가공제품 개발에 대한 기초자료로 제시하고자 한다. 4$0^{\circ}C$에서 20시간 발아시킨 찹쌀 발아현미(수분함량 15.45%)와 멥쌀 발아현미(수분함량 15.02%)의 품질 특성중 amylose 함량은 각각 4.9%, 17.9%, 환원당은 4.91%, 2.28%, 유리당은 찹쌀 발아현미가 glucose 0.42%, sucrose 0.15%, maltose 0.27%이고 멥쌀 발아현미가 glucose 0.59%, sucrose 0.50%, maltose 0.24%였다. 찹쌀과 멥쌀 발아현미의 색차값은 각각 L값 60.30, a값 2.12, b값 23.52과 L값, 59.51, a값 3.15, b값 23.04이다. 호화도는 1.67%, 5.21%이고, 조직감중 hardness는 7.53 kgf, 8.93 kgf로 멥쌀 발아현미가 높았다. 찹쌀 발아현미의 아밀로그램 특성은 호화 초기온도가 42$^{\circ}C$였으며, breakdown값은 94, set back값은 -48이었으며, 멥쌀 발아현미의 특성은 호화 초기온도가 7$0^{\circ}C$였으며, breakdown값은 0, set back값은 123이었다. 비타민 E 함량은 찹쌀 211.79 $\mu\textrm{g}$/kg, 멥쌀 310.59 $\mu\textrm{g}$/kg이고, 총식이섬유 함량은 4.21%, 3.17%이다. 발아현미 원곡간의 향기패턴은 차이가 나지 않았으며 발아현미 제조 후 찹쌀, 멥쌀 모두 이취 성분은 거의 없었다. 발아현미의 절단 내면 미세구조를 관찰한 결과 찹쌀 발아현미 cell이 멥쌀 발아현미보다 작았으며, 표면 구조도 찹쌀 발아현미가 더욱 조밀하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.269-273
• /
• 2001

The effect of $TiO_2$addition on the hydration reaction of MgO ceramics were studied after being heated at $1450^{\circ}C$. The pure MgO ceramics showed significant weight change after exposure to water due to the hydration reaction through the formation of $Mg(OH)_2$while $TiO_2$-added MgO ceramics did not. The $Mg_2TiO_4$phase were observed in the $TiO_2$-added MgO ceramics sintered at 145$0^{\circ}C$. Bulk density increased as the amount of $TiO_2$increased and the apparent porosity and water absorption decreased by $TiO_2$addition. The hydration resistance of MgO ceramics was found to be improved by $TiO_2$addition.