• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.301-301
• /
• 2015

효율적인 지하수 관리를 위해서는 시공간적인 변동성을 고려한 지하수 함양량의 정량적 산정이 필수적이다. 본 연구에서는 지표수-지하수 연동해석이 가능하며 토지이용 특성과 국내 토양특성을 가장 잘 표현할 수 있는 한국형 장기 유출 모형 SWAT-K를 이용하여 장성지역의 분포형 지하수 함양량을 산정하였다. 행정경계와 수자원단위지도에서 제시하는 표준단위유역을 기준으로 하여 장성군을 포함하는 유역을 SWAT-K 구동을 위한 모델영역으로 설정하여 주하도를 따라 13개의 소유역으로 구분하였다. SWAT-K를 구동하기 위해서는 기상 및 수문자료를 구축해야 하는데 강우량을 비롯하여 기온, 풍속, 일사량, 상대습도 등의 기상자료가 요구된다. 본 연구에서는 대상유역 내에 위치한 광주, 정읍 기상관측소의 자료를 이용하여 기상자료를 구축하였으며, 모형의 계산시간, 모형결과의 정확도 등을 판단하여 30m 공간해상도를 가지는 DEM을 300m 공간해상도로 가공하여 사용하였다. 토지이용도는 모의시 다양한 토지이용상태를 반영할 수 있도록 중분류(1:25,000) 토지이용도를 사용하였다. 토양도는 국립농업과학원에서 토양도 전산화 사업을 통해 구축된 1:25,000 축척의 정밀토양도를 사용하였다. SWAT-K를 이용하여 장성군을 포함한 전체유역에 대해 지표수-지하수 통합 물수지 분석 결과(2005년~2013년) 연평균 강수량 대비 유출률은 63.0%, 증발산률은 34.6%, 함양률은 19.5%로 나타났다. 지표수 유출과정과 지하수위 변동을 동시에 고려하여 산정한 소유역별 연간 함양량 결과를 산정하였고, 총 13개의 소유역별 연간 지하수 함양량을 제시하였다. 또한 SWAT-K 모형을 이용한 모델 영역중 장성군에 속하는 행정구역별, 표준권역별 연평균 함양량을 산출하였으며, 그 분석 결과 장성군 평균 함양률은 20.3%로 산정되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.410-410
• /
• 2017

지하수 관리를 위해서는 시공간적인 변동성을 고려한 지하수 함양량의 정량적 산정이 필수적이다. 본 연구에서는 지표수-지하수 연동해석이 가능하며 토지이용 특성과 국내 토양특성을 가장 잘 표현할 수 있는 한국형 장기 유출 모형 SWAT-K를 이용하여 김천지역의 분포형 지하수 함양량을 산정하였다. 행정경계와 수자원단위지도에서 제시하는 표준단위유역을 기준으로 하여 김천시를 포함하는 유역을 SWAT-K 구동을 위한 모델영역으로 설정하여 주하도를 따라 19개의 소유역으로 구분하였다. SWAT-K를 구동하기 위해서는 기상 및 수문자료를 구축해야 하는데 강우량을 비롯하여 기온, 풍속, 일사량, 상대습도 등의 기상자료가 요구된다. 본 연구에서는 대상유역 내에 위치한 구미, 추풍령, 거창, 상주 기상관측소와 김천, 지례, 부항1, 부항2, 선산 강우관측소의 자료를 이용하여 기상 및 강우자료를 구축하였으며, 모형의 계산시간, 모형결과의 정확도 등을 판단하여 30m 공간해상도를 가지는 DEM을 300m 공간해상도로 가공하여 사용하였다. 토지이용도는 모의시 다양한 토지이용상태를 반영할 수 있도록 중분류(1:25,000) 토지이용도를 사용하였다. 토양도는 국립농업과학원에서 토양도 전산화 사업을 통해 구축된 1:25,000 축척의 정밀토양도를 사용하였다. SWAT-K를 이용하여 김천시를 포함한 전체유역에 대해 지표수-지하수 통합 물수지 분석 결과(2008년~2015년) 연평균 강수량 대비 유출률은 61.2%, 증발산률은 36.3%, 함양률은 18.0%로 나타났다. 지표수 유출과정과 지하수위 변동을 동시에 고려하여 산정한 소유역별 연간 함양량 결과를 산정하였고, 총 19개의 소유역별 연간 지하수 함양량을 제시하였다. 또한 SWAT-K 모형을 이용한 모델 영역중 김천시에 속하는 행정구역별, 표준권역별 연평균 함양량을 산출하였으며, 그 분석 결과 김천시 평균 함양률은 18.2%로 산정되었다.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.471-479
• /
• 2018

Seonunsa Temple is a site of Dancheong cultural significance in Daewoongjeon. Three-dimensional (3D) scanning can be used to create a simulation in 1:1 ratio without touching the Dancheong patterns directly. The traditional method of recreating Dancheong was paining with tracing paper using a fix pin. However, manual direct copy processes can cause and damage to the objects. This study shows the results of a simulation of a tranditional Dancheong patterns as an alternative; the simulation was able to reduce dimensional errors and prevent damage by using 3D scanning. As a result, objective and precise proportions of the simulation were acquired. The 3D scanning method may be applied for work such as the replication and restoration of the drawing, 3D fabrication of the original data, and printing of the additional drawing. In addition, with the production of 3D materials, a virtual museum is possible.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.32-38
• /
• 2017

This paper is about the analysis on the vibration characteristic of tooling units on the precision bed in high-speed automatic lathe for precision machining. An automatic lathe operating at about 25,000 RPM is a critical factor in the self-weight stress and deformation of the bed. Especially, the resonance frequency should be grasped in advance to prevent abnormal vibration that may occur during processing. If the wrong bed is used, the resonant frequency can have a fatal influence on the precision machining and increase the defective rate of precision machined parts such as semiconductor parts. In this paper, vibration characteristics were evaluated through static load and resonance frequency analysis of automatic lathe bed. As a result, the maximum stress was 0.14MPa, the maximum deformation amount was $17.9{\mu}m$, and the natural frequency was 364.72Hz. The resonance frequency was calculated as 718Hz, and the stability was confirmed by being in the range of 400Hz or more, which is the processing condition.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.80-88
• /
• 2019

Recently, automobile manufacturing companies, which are major customers of them, are requiring IATF 16949 (ISO/TS 16949) certification as a mandatory requirement to secure product quality. In particular, IATF 16949 : 2016, revised in October 2016, was reinforced product traceability requirements for production information management by lot in the production process. Therefore, small and medium-sized precision parts processing companies in the automobile industry are very difficult to survive due to quality and price competition for customers satisfaction. MES (Manufacturing Execution System) is required to solve this problem. However, small and medium sized precision parts processing enterprises are reluctant to introduce the MES which is not suitable for the manufacturing environment of them such as high cost and low utilization. Even if the system is introduced, it is difficult to operate and maintain the system because the lack of computer manpower. In this paper, we propose a method for building a lot tracking system for small and medium precision parts processing companies by reviewing relevant literature and analyzing cases. In addition, by managing the production history for each lot of the final product in the system, we will grasp the effect of reducing the quality failure cost obtained by minimizing the range of defect selection.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.113-119
• /
• 2019

We have developed the multi-functioned friction measuring instrument for the previous research. In here, we improved the performance of friction measuring instrument by applying the adaptive smoothing method and analyzed the friction of plate and monitoring function of friction surface through scratch tests. We substituted lubricant steel plate to lubricant oil used for reducing the friction when fabricating steel plate because lubricant oil was regarded as one of the major causes for the environmental pollution. In particular, the functions of various plate such as galvannealed steel sheets were analyzed because friction coefficient could be changed depending on the type of organic/inorganic plate or state of coating layer. Therefore, we demonstrated that adaptive smoothing method could enhance the accuracy of measuring instrument which eliminate the noise. As a result of using the method, it showed the reduction rate 0.0417% for the friction coefficient 0.16.

• Korean Journal of Optics and Photonics
• /
• v.32 no.6
• /
• pp.259-265
• /
• 2021

Recently, lens manufacturing and assembly technology has greatly improved. However, tight requirements of manufacturing and assembly lead to an increase in cost and manufacturing time, and in some cases the performance of an optical system may deteriorate depending on the operating environment's conditions, such as temperature or vibration. In addition, the use of a compensator is an effective method to reduce sensitivity in an ultra-precision optical system, but in the case of a small lens, such as that in an endoscope, it is difficult to use a compensator due to the size limitation of the lens barrel. Therefore, minimizing lens sensitivity is the most important technology in lens design. For this reason, there have been various attempts to reduce the lens sensitivity, and there is a trend to add functions to reduce the sensitivity in the lens design S/W. In this paper, we introduce a design technology that minimizes lens sensitivity. We first design a lens with quite good performance, then analyze the sensitivity of this lens, make a multi-configuration with high-sensitivity element error, and then reoptimize it. We prove with an example that this design technique is very effective.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.75-87
• /
• 2022

This study investigates a dynamic flexible flow shop scheduling problem under uncertain rework operations for an automobile pipe production line. We propose a weighted dispatching rule (WDR) based on the multiple dispatching rules to minimize the weighted sum of average flowtime and tardiness. The set of weights in WDR should be carefully determined because it significantly affects the performance measures. We build a discrete-event simulation model and propose a genetic algorithm to optimize the set of weights considering complex and variant operations. The simulation experiments demonstrate that WDR outperforms the baseline dispatching rules in average flowtime and tardiness.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.6
• /
• pp.271-278
• /
• 2008

The electro-mechanical characteristics were theoretically analyzed for the wideband ultrasonic transducer made of non-uniform thickness piezoelectric vibrator. This paper proposes a combination of exponential functions which describes the thickness variation along the length of the vibrator to derive the input admittance and power transfer function of the transducer. The bandwidth and the power transfer function of the transducer were investigated while the lateral shape of the vibrator changes. The results showed there is an optimum shape for the wideband characteristics of the transducer, and the bandwidth has increased up to over 100% as the ratio of minimum value of thickness to maximum value decreases. However, the power transfer function had a downward trend as the ratio of thickness decreases. Also we confirmed that even though the value of transfer function increases as the length of the piezoelectric vibrator increases, the shape providing wideband characteristics is very limited. It means that precision processing is required to manufacturing a wideband ultrasonic transducer with high efficiency.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.83-90
• /
• 2023

The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value G_Ic were 1.357 kJ/m2 and 1.397 kJ/m2, respectively, and Mode-II critical strain energy release rate values G_IIc were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.