• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.1966-1971
• /
• 2013

Pholiota adiposa is an edible as well as medicinal mushroom cultured in China and Japan with anti-tumor, anti-microbial, anti-hypertensive, and anti-hyperlipidemic activities. This study was carried out to investigate the quality characteristics of cookies added with Pholiota adiposa powder. Chemical composition of Pholiota adiposa powder was as follows: 3.8% moisture, 6.9% ash, 1% crude lipids, 3% protein, 53.3% carbohydrates, and 31.9% crude dietary fiber. To analyze quality characteristics during the manufacture of cookies, pH, texture, color, antioxidant activity, total polyphenol content, and sensory evaluation were determined. As the content of Pholiota adiposa powder increased, the pH of cookies decreased from 6.7 to 6.02. Hardness of cookies decreased with increasing Pholiota adiposa powder content, and cookies added with 5% powder were softer than the control. Regarding surface color, L-value decreased with increasing powder content compared to that of the control, whereas in surface color among various powder levels was not significantly different. As the content of Pholiota adiposa powder increased, both antioxidant activity and total polyphenol content increased. In the sensory evaluation, cookies added with 3% Pholiota adiposa powder showed remarkably higher values compared to control and other amples in all aspects.

• Journal of Food Hygiene and Safety
• /
• v.31 no.5
• /
• pp.327-334
• /
• 2016

This study was conducted to establish the standard method for the contents of biotin in milk formulas. To optimize the method, we compared several conditions for liquid extraction, purification and instrumental measurement using spiked samples and certified reference material (NIST SRM 1849a) as test materials. LC-MS/MS method for biotin was established using $C_{18}$ column and binary gradient 0.1% formic acid/acetonitrile, 0.1% formic acid/water mobile phase is applied for biotin. Product-ion traces at m/z 245.1 ${\rightarrow}$ 227.1, 166.1 are used for quantitative analysis of biotin. The linearity was over $R^2=0.999$ in range of $5{\sim}60{\mu}g/L$. For purification, chloroform was used as a solvent for eliminating lipids in milk formula. The linearity was over 0.999 in range of 5~60 ng/mL. The detection limit and quantification limit were 0.10, 0.31 ng/mL. The accuracy and precision of LC-MS/MS method using CRM were 103%, 2.5% respectively. Optimized methods were applied in sample analysis to verify the reliability. All the tested milk formulas were acceptable contents of biotin compared with component specification and standards for nutrition labeling. The standard operating procedures were prepared for biotin to provide experimental information and to strengthen the management of nutrient in milk formula.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.6-15
• /
• 1973

In an attempt to develop composite flours based on raw materials available in Korea, six domestic resources were investigated with respect to their physical and chemical properties, nutritive value and economy. The results are summarized as follows: 1) Flours from naked barley, sweet potato, potato, corn, defatted rice bran and defatted soybean were compared in respect of their proximate composition, thiamine content and protein score. 2) In color comparison, naked barley and defatted soy flours were comparable to wheat flour whereas corn and sweet potato flours were a little inferior. In raising power, naked barley and defatted soy flours were similar to wheat flour and others were inferior. 3) In maximum viscosity of flours by amylograph, naked barley, corn and potato flours were higher than wheat flour and others were lower. In viscosity in cooling, corn flour was similar to wheat flour and naked barley and potato flours were lower. Addition of $10{\sim}20%$ defatted soy flour into other flours generally caused the lowering of viscosity. Addition of emulsifiers such as glyceryl monostearate, calcium stearyl lactylate, Methocel and Emulthin into the flours manifested different effects on the amylogram. 4) In nutritional test by rat, diets consisting of naked barley, sweet potato, potato or corn flours, each containing defatted soy flour (at 10% level with exception of 20% for sweet potato flour) and naked barley flour fortified with lysine were similar to wheat flour in digestibility, but were superior in NPU and biological value. 5) In price estimation, sweet potato and corn flours were competitive with wheat flour, but naked barley flour was a little expensive. On the other hand, barley and sweet potato are promising in terms of domestic production.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.588-592
• /
• 2007

In this study, we evaluated the recovery effects of dietary fiber extracted from soybean hulls on diarrhea in rats. Diarrhea-induced Sprague-Dawley male rats were divided randomly into 4 groups and fed experimental diets for 24 hours. The diets, based on the AIN93G diet, were as follows: CON (control diet), S-COTL (67.2 g/kg soybean cotyledon fiber diet), S-HULL (59.6g/kg soybean hull fiber diet), CHI (55.6g/kg chicory fiber diet). The results showed significant (10-20%) reductions of fecal water content in the CON and S-HULL groups, as compared to the S-COTL and CHI groups. The change in serum osmolality, a measure of dehydration symptoms, was significantly reduced in CON and S-HULL as compared to the S-COTL and CHI groups. Based on the results, it is suggested that soybean hull fiber functions well for diarrhea recovery in rats. Consequently, soybean hull fiber is an important food source that could be used as a medical food in patients suffering from diarrhea.

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.7-11
• /
• 2013

The purpose of this study was to estimate (co) variance components of three milk production traits for genetic evaluation using a multiple lactation model. Each of the first five lactations was treated as different traits. For the parameter estimation study, a data set was set up including lactations from cows calved from 2001 to 2009. The total number of raw lactation records in first to fifth parities reached 1,416,589. At least 10 cows were required for each contemporary group, herd-year-season effect. Sires with fewer than 10 daughters were discarded. Lactations with 305d milk yield exceeding 15,000 kg were removed. In total, 1,456 sires of cows were remained after all the selection steps. A complete pedigree consisting of 292,382 records was used for the study. A sire model containing herd-year-season, caving age, and sire additive genetic effects was applied to the selected lactation data and pedigree for estimating (co) variance components via VCE. Heritabilities and genetic or residual correlations were then derived from the (co) variance estimates using R package. Genetic correlations between lactations ranged from 0.76 to 0.98 for milk yield, 0.79~1.00 for fat yield, 0.75~1.00 for protein yield. On individual lactation basis, relatively low heritability values were obtained 0.14~0.23, 0.13~0.20 and 0.14~0.19 for milk, fat, and protein yields, respectively. For the combined lactation heritability values were 0.29, 0.28, and 0.26 for milk, fat, and protein yields. The estimated parameters will be used in national genetic evaluations for production traits.

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.25-34
• /
• 2015

TThis study explored the requirement of fabric sensor that can measure the motion of the joint effectively by measuring and analyzing the variation in electric resistance of a sensor in accordance with bending and stretching motion of the arm by the implementation of a motion sensor utilizing conductive fabric. For this purpose, on both sides of two kinds of knitted fabric, namely 'L' fabric and 'W' fabric Single Wall Carbon Nano-Tube(SWCNT) was coated, fabric sensor was developed by finishing them in a variety of ways, and the sensor was attached to the arm band. The fabric sensor consisted of total 48 cases, namely background fabric for coating, the method of sensor attachment, the number of layer of sensors, the length of sensor, and the width of sensor. The performance of fabric motion sensors in terms of a dummy arm, that is, a Con-Trex MJ with 48 arm bands around it was evaluated. For each arm band, a total of 48, fastened around the dummy arm, it was adjusted to repeat the bending and stretching at the frequency : 0.5Hz, ROM : $20^{\circ}{\sim}120^{\circ}$, the voltage was recorded for each case after conducting three sets of repeat measurement for a total of 48 cases. As a result of the experiment, and as a consequences of the evaluation and analysis of the voltage based on the uniformity of the base line of the peak-to-peak voltage(Vp-p), the uniformity of Vp-p within the same set, and the uniformity of the Vp-p among three sets, the fabric sensors that have been configured in SWCNT coated 'L' fabric / welding / two layers / $50{\times}5mm$, $50{\times}10mm$, $100{\times}10mm$, and SWCNT coated 'W' fabric / welding / two layers / $50{\times}10mm$ exhibited the most uniform and stable signal value within 5% of the total variation rate. Through all these results of the experiment, it was confirmed that SWCNT coated fabric was suitable for a sensor that can measure the human limb operation when it was implemented as a fabric sensor in a variety of forms, and the optimal sensor types were identified.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.97-104
• /
• 2002

Protein hydrolysate was prepared as a natural flavor stock from the sharp toothed eel (Muraenesox cinereus) mince using com-mercially available proteolytic enzymes, Alcalase, Neutrase, Protamex, and Flavourzyme. A 6 hr hydrolysis of mince, to which water of the equal weight of the mince was added, with $2\%$ (w/w, protein weight) Elavourzyme at $50^{\circ}$ yielded a hydrolysate of the highest acceptability. Removing the access lipid in liquified hydrolysate (not dehydrated) after enzyme hydrolysis, five times repetitive extraction using n-hexane (liquified hydrolysate : n-hexane=4 : 1, v/v) was effective, resulting in less than $1\%$ lipid content of the dehydrated-hydrolysate. The amino acid composition of the hydrolysate (prepared with Flavourzyme) was similar to that of the starting material. Hydrolysis led to an increase in concentration of not only total free amino acid but also free amino acid such as serine, glutamic acid, alanine, and methionine responsible for umami taste, especially up to about 40 times for methionine. Major free amino acids in amount were leucine, phenylalanine, valine, alanine, and isoleucine and they comprised about half of the total free amino acids, Moisture adsorption, fat adsorption, emulsifying capacity, and foaming capacity of the hydrolysate were 870.1 $\pm$ $7.9\%$, 352.0$\pm$ $5.3\%$, 50.3 $\pm$ $1.2\%$, and $87.5\pm$ $2.5\%$, respectively, and solubility was 83$\~$$84\%$ at acid pH range of 2$\~$4.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.783-791
• /
• 2015

A fluidized-bed reactor with an inside diameter of 0.1 m and a height of 1.2 m was used to study the effect of steam and catalyst additions to air-blown biomass gasification on the production of producer gas. The equipment consisted of a fluidized bed reactor, a fuel supply system, a cyclone, a condenser, two receivers, steam generator and gas analyzer. Silica sand with a mean particle diameter of $380{\mu}m$ was used as a bed material and calcined dolomite ($356{\mu}m$), which is effective in tar reduction and producer gas purification, was used as the catalyst. Both of Korea wood pellet (KWP) and a pellet form of EFB (empty fruit bunch) which is the byproduct of Southeast Asia palm oil extraction were examined as biomass feeds. In all the experiments, the feeding rates were 50 g/min for EFB and 38 g/min for KWP, respectively at the reaction temperature of $800^{\circ}C$ and an ER (equivalence ratio) of 0.25. The mixing ratio (0~100 wt%) of catalyst was applied to the bed material. Air or an air-steam mixture was used as the injection gas. The SBR (steam to biomass ratio) was 0.3. The composition, tar content, and lower heating value of the generated producer gas were measured. The addition of calcined dolomite decreased tar content in the producer gas with maximum reduction of 67.3 wt%. The addition of calcined dolomite in the air gasification reduced lower heating value of the producer gas. However The addition of calcined dolomite in the air-steam gasification slightly increased its lower heating value.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.5
• /
• pp.408-418
• /
• 1987

The quality of different grades of dried lavers obtained from three culture areas was evaluated and its changes during the storage at different levels of water activity were measured. Not much differences in general chemical composition between the locality was detected except some in the content of lipid and pigments. But the quality grades of dried lavers were mainly depended upon the content of protein and pigments including chlorophyll a, carotenoids, and biliproteins although there was little difference in amino acid composition of the proteins, and glutamic acid, aspartic acid and alanine were high in general. The lipid of dried lavers was composed of a high level of polyunsaturated fatty acids, particularly, of eicosapentaenoic acid which amounted to as much as a half of the total lipid, and of palmitic acid that reached a quarter depending on grades. The quality of dried layers was significantly changed by equilibrium moisture level when stored for three months at different water activities in range of 0.1 to 0.6. The loss of chlorophyll a, carotenoid, biliproteins, ascorbic acid, and browning were markedly retarded at aw 0.1 to 0.2. Oxidation of polyunsaturated fatty acids and the loss of free amino acids were also minimized at aw 0.2. Glutamic acid and methionine were reduced very fast during the storage.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.144-147
• /
• 2014

It was intended to closely examine an effect that a change in the concentration of culture medium had on the potato(Solanum tuberosum L.) plantlet growth in the microponic system so as to mass-produce the virus-free plant of new variety 'Saebong' for potato processing. The adjusted concentration of potato culture medium was 0.2, 0.6, 1.0, 1.4, 1.8, and $14.0dS{\cdot}m^{-1}$. And potato seedling was cut into pieces of 1.5 cm in length, which included 2 growth points and leaves. And each was explanted in glass vial of 50 mL. And experiments were carried out twice for 18 days or 21days. Culture medium of 2ml was put in the container respectively. And 1 mL was added after 10 days. And in terms of cultivation environment, the experiment was carried out at the day length of 16 hours at the temperature of $23{\pm}1^{\circ}C$ under the white LED light of $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The concentration of culture medium in the experiment I was EC 0.2, 1.0, $14dS{\cdot}m^{-1}$ and was adjusted to 0.6, 1.0, 1.4, $1.8dS{\cdot}m^{-1}$ in the experiment II. The results showed that the survival rate of plantlet was 90% at $0.2dS^2m^{-1}$, 100% at $0.6dS^2m^{-1}$, 100% at $1.0dS^2m^{-1}$. 0% at $1.4dS{\cdot}m^{-1}$, 0% at $1.8dS{\cdot}m^{-1}$. and 0% at $14.0dS{\cdot}m^{-1}$ after 7 days. With regard to the explanted potato seedling, in case of the treatment where the electrical conductivity of culture medium was adjusted to $1.0dS{\cdot}m^{-1}$, root developed 2 days after transplantation. And the plantlet vigorously grew into strong plant that had 7 leaves, length of 5cm, and fresh weight of 0.5 g after 18 days. In case of the treatment where the concentration of culture medium was adjusted to $0.6dS{\cdot}m^{-1}$, the root plantlets developed 4 days after transplantation. And those grew into plant that had 7 leaves and fresh weight of 0.2 g after 21 days. Therefore, we found that it is effective to control potato culture medium by adjusting its electrical conductivity to $0.6{\sim}1.0dS{\cdot}m^{-1}$ for the mass production of virus-free potato seedling in the microponic system.