• The Korean Ginseng Research and Industry
• /
• v.5 no.2
• /
• pp.4-17
• /
• 2011

• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.28-30
• /
• 2008

본 논문은 국내 실정에 적합한 초고압 가공 직류 송전(HVDC)선로 설계를 위해서 세계적으로 처음 시도되는 가변 기능을 지닌 Proto Type HVDC 실규모 시험선로의 설계와 구축에 대해 소개한다. 시험선로는 초고압 직류송전시 발생하는 이온의 흐름에 의한 이온전류 밀도, 대전 전압, 지표면 전계강도 등 이온류(Ion류(流))에 의한 전기환경장애 및 코로나 영향을 검토하여 환경 친화적 HVDC 송전선로 설계기준을 도출하는데 있다. 이에 따라 HVDC 실규모 시험선로는 요크, 특수 애자련, 특수 arm을 사용하여 철탑의 극간 배치, 도체 배치 변경 및 지상고 변경이 가능하도록 winch를 채용하여 절연설계 조건의 유동성, 환경, 지지물, 송전기자재, 경제성 및 운용의 효율성을 종합적으로 고려할 수 있도록 특수한 형태로 설계되었으며, 본 논문은 상용 가공 HVDC 송전방식의 적용에 앞서 현재의 상황을 고려한 가공 HVDC 실증시험을 수행하기 위한 시험선로의 설계 및 구축에 대하여 기술하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2003.04a
• /
• pp.101-107
• /
• 2003

국내에서는 90년대 후반 이후부터 건식코팅 중 제조공정이 단순하고 제조비용의 부담이 적으며 생산속도가 빠른 친수성 폴리우레탄 수지를 사용한 비다공질 투습방수포가 점차 확대되어 일반적으로 많이 제조되어지고 있다. 친수무공형 투습방수포는 다공질형의 투습방수포와는 달리 연속적인 비다공질의 solid한 코팅 층으로 구성되어진다. 이러한 비다공질 막은 물에 대하여 내수압이 뛰어나며 투습도는 친수성 피막의 두께에 반비례하는 특징을 가지고 있다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.444-444
• /
• 2010

최근 복잡한 고진공 시스템에서 수행되는 플라즈마 공정을 대신하여 진공 시스템 없이 대기압 플라즈마를 이용한 보다 경제적이고 신속하게 공정을 수행하는 연구가 활발히 진행 중이다. 이러한 대기압 플라즈마의 높은 응용성을 이용한 에칭과 증착 등의 기술은 플라즈마의 물리적 접근 없이 세계적으로 몇몇 선도 연구그룹에서 시도되고 있다. 본 연구팀에서는 대기 중에서 He, Ar, $N_2$, $O_2$, Air 등의 여러 종류의 기체에서 방전하여 미세가공이 가능한 $500\;{\mu}m$ 이하의 마이크로 제트를 개발하였다. 입력전압, 기체유량, 노즐의 구조와 크기 등의 여러 운전변수의 조절을 통해 폴리머 기판위에서 방전되는 마이크로 플라즈마 제트의 안정된 방전조건을 찾았고, 전압-전류 특성곡선(V-I characteristics), 광방출분광법(OES), 시간분해 이미지 촬영법(ICCD), 기체온도 측정법 등을 이용하여 발생된 플라즈마의 물리적인 특성을 분석하였다. 발생된 플라즈마를 이용해 처리된 폴리머 기판의 물성변화를 AFM을 통해 관찰하여 짧은 플라즈마 처리시간에도 효과적인 표면개질의 변화를 확인하였다. 마지막으로 본 기술을 이용한 대기압 마이크로 공정의 응용기술 및 가능성을 연구하였다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1469-1474
• /
• 2007

In recent years, research to machine large-surface micro-features has become important because of the light guide panel of a large-scale liquid crystal display and the bipolar plate of a high-capacity proton exchange membrane fuel cell. In this study, in order to realize the systematic design technology and performance improvements of an ultra-precision machine for machining the large-surface micro-features, a structural characteristic analysis was performed using its virtual prototype. The prototype consisted of gantry-type frame, hydrostatic feed mechanisms, linear motors, brushless DC servo motor, counterbalance mechanism, and so on. The loop stiffness was estimated from the relative displacement between the tool post and C-axis table, which was caused by a cutting force. Especially, the causes of structural stiffness deterioration were identified through the structural deformation analysis of sub-models.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.35-38
• /
• 2004

In general, tube drawing process is composed of two steps, so called first drawing and second drawing. Drawing cracks are mainly occurred during the 2nd drawing process due to the improper drawing process. In order to analyze the reduction distribution in successive two-step drawing process, tube drawing process was simulated by finite element method. From the finite element analysis, the balance between first and second reduction is proved to be important factor to prevent drawing cracks. Hence the numerical expression was developed for tube drawing process to distribute even strain and criteria curves that can predict the safe drawing region were also proposed using this numerical formula.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.380-384
• /
• 1997

For improving the motion accuracy of hydrostatic table, corrective machining algorithm is proposed in this paper. The algorithm consists of three main processes. Reverse analysis is performed firstly to estimate rail profile from measured linear and angular motion error, in the algorithm. For the next step, correctwe machining information is decided as referring to the estimating rail profile. Finally, motion errors on correctively machined rail are analized by using motion error analysls method proposed in the previous paper. These processes can be rtcrated if the analized motion errors are worse than target accuracy. In order to verify the validity of the algorithm theoretically, motion errors by the estimated rail after corrective machining are compared with motion errors by true rail assumed as the measured value. Estimated motion errors show good agreement with assumed values, and it is confirmed that the algorithm IS effective to acquire the corrective machming information to improve the accuracy of hydrostatic table.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.425-428
• /
• 1997

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective lapping work to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13pm of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07pm of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by the unskilled person after he experienced a little of preliminary machining. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.128-131
• /
• 2004

Magnesium alloys are being extensively used in weight-saving applications and as a potential replacement for plastics in electronic and computer applications. Magnesium alloy has some good characteristics, EMI shielding property and high specific strength. Nevertheless their high brittleness make it uneasy to process the magnesium. Magnesium alloys are extruded like aluminium alloys. The present work was done to find a characteristic of magnesium alloy(AZ31) changing the extrusion ratio 8.5, 19.1, 49 respectly and changing the die half angle $30^{\circ},\;45^{\circ},\;60^{\circ}$. Here this present done by the hydrostatic extrusion in the hot condition, $310^{\circ}$. The higher the extrusion ratio goes, the higher the extrusion force goes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.463-466
• /
• 2005

Restoring ductility or removing residual stresses is a necessary operation when a large amount of cold working is to be performed, such as in a cold-forging or warm forging process. The advantage of annealing temperatures was investigated. After Hydrostatic Extrusion process, extruded materials were annealed at $200^{\circ}C,\;350^{\circ}C,\;450^{\circ}C$ for 1 hour. Microstructure of the annealed material was observed to make an understand about the difference in mechanical properties.