• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.193-206
• /
• 2014

The objectives of the project are to increase farmers' income through GAP and to reduce the loss of agricultural produce, for which the Korean partner takes a role of transferring needed technologies to the project site. To accomplish the project plan, it is set to implement the project with six components: construction of buildings, installation of agricultural facilities, establishment of demonstration farms, dispatching experts, conducting training program in Korea and provision of equipments. The Project Management Committee and the Project Implementation Team are consisted of Korean experts and senior officials from Department of Agriculture, Myanmar that managed the project systematically to ensure the success of the project. The process of the project are; the ceremony of laying the foundation and commencing the construction of training center in April, 2012. The Ribbon Cutting Ceremony for the completion of GAP Training Center was successfully held under PMC (MOAI, GAPI/ARDC) arrangement in SAl, Naypyitaw on June 17, 2012. The Chairman of GAPI, Dr. Sang Mu Lee, Director General U Kyaw Win of DOA, officials and staff members from Korea and Myanmar, teachers and students from SAl attended the ceremony. The team carried out an inspection and fixing donors' plates on donated project machineries, agro-equipments, vehicles, computers and printer, furniture, tools and so forth. Demonstration farm for paddy rice, fruits and vegetables was laid out in April, 2012. Twenty nine Korean rice varieties and many Korean vegetable varieties were introduced into GAP Project farm to check the suitability of the varieties under Myanmar growing conditions. Paddy was cultivated three times in DAR and twice in SAl. In June 2012, vinyl houses were started to be constructed for raising seedlings and finished in December 2012. Fruit orchard for mango, longan and dragon fruit was established in June, 2012. Vegetables were grown until successful harvest and the harvested produce was used for panel testing and distribution in January 2013. Machineries for postharvest handling systems were imported in November 2012. Setting the washing line for vegetables were finished and the system as run for testing in June 2013. New water tanks, pine lines, pump house and electricity were set up in October 2013.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.2
• /
• pp.3-19
• /
• 1978

Five species, Abies koreana Wilson (A. koreana), Castanopsis cuspidata var. Sieboldii Nakai (C. Cuspidata). Machilus thunbergii Sieb. et Zucc. (M. thunbergii), Styrax japonica (S. japonica), and Quercus acuta Thunberg(Q. acuta) growing in the southern part of Korea were selected for the investigation of wood properties. In order to evaluate the wood properties of these five species, anatomical, physical, mechanical, chemical and pulping characteristics were investigated. And this study also covered wood technological problems related to the drying, gluing, debarking, flooring, and wood workability so that these species might serve to the best advantage. The results obtained were summarized as follows: 1. The trunk of A. koreana with many knots was straight. However, the trunks of S. japonica and C. cuspidata were crooked. 2. A. koreana showed the longest and the widest ill the fiber morphology; 2.97mm in length, 39.3${\mu}$ in width. In general, fiber width of all the species investigated were greater than those of other Korean hardwoods. 3. The specific gravity of Q. acuta was 0.74${\pm}$0.03, and that of A.koreana was 0.34${\pm}$0.02. The range of specific gravity of the other species was 0.47-0.52. 4. The adsorption of water was propotioned inversely with the specific gravity, but the adsorption of humidity was proportioned with the specific gravity. In spite of their medium density, S. japonica showed the greatest adsorption, and M. thunbergii the least. The water adsorption of cross section was twice greater than that of lateral direction, and there was a slight difference in between the radial and the tangential direction. 5. Shrinkage for tested five species was ranged from 5.36 to 10.24% in tangential direction, and 2.83~6.13% in radial direction. Q. acuta recorded the greatest shrinkage rate, and A. koreana the least. The greater was the specific gravity, the larger was the shrinkage rate. 6. The mechanical properties of Q. acuta were similar to those of Quercus mongolica which grow in Kangwon-Do. Strength properties of C. cuspidata, M. thunbergii, A. koreana were equivalent to those of other Korean commercial woods with similar specific gravity, except S. japonica which showed slightly higher strength than that of other species with similar density. 7. Higher glue joint strength for urea and phenol adhesieves was recorded in the species of M. thunbergii and C. cuspidata, however, high-density species(Q. acuta) and even low-density species(A. koreana) did not show good joint strength. 8. The attractive figure of M. thunbergii in texture seemed to he appreciated for decoration. And the grain and texture of other species were proper for furniture and building materials. 9. All of the species except Q. acuta were considered good for wood workability. 10. The denser the specific gravity was, the longer the drying time took. However, severe drying defects were formed in M. thunbergii whose density was medium. 11. All the species were considered suitable for the flooring wood expect A. koreana whose density was light. 12. Pentosan component in all the species was great, and the amount of extractives in Q. acuta was worth noticing. 13. Yield in kraft pulp was above the level of economic pulp yield, i.e. 45% in all species. 14. Debarking was easy in the species of A. koreana and M. thunbergii, and debarking after being boiled in water was the most efficient in all species.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.82-101
• /
• 2014

The purpose of this study was to survey and analyze the origin story and the legends associated with Yongyudam(龍遊潭, Dragon Creek), its scenic and spatial description in Climbing Writings(遊山記: Yusangi Notes), its geographical and geological features, its surrounding remains and letters chiseled on the rocks through the field study and the study on literatures associated with it so to identify its significance and value and then to ensure justification on preservation of Yongyudam scenic site. Conclusions of this study are as follow. As the traditional scenic place 'Geumdae-Jiri(金臺智異)' representing Hamyang-gun(咸陽郡) depicts Mount Cheonwangbong and 'Yongyudong Village(龍遊洞)', ancient maps and literatures have positioned Yongyudam as the center of Eomcheon-river Creek as well as the representing scenic site of Yongyudong Village. Core images in the spatial awareness of Yongyudam described in our ancestors' Climbing Writings Notes on Jirisan Mount are 'geographical and scenic peculiarity associated with swimming dragons', 'potholes in various shapes and sizes scattered on rocks', 'loud sound generated by swirling from shoals' and 'the scenic metaphor from the dragon legend', which have led scenic features of Yongyudam scenic site. In addition, significant scenic metaphors from legends such as 'Nine Dragons and Ascetic Majeog' and 'Kasaya Fish' as well as 'the Holy Place of Dragon God', the rain calling magic god have descended not only as the very nature of Yongyudam scenic site but also the catalyst deepening its mystic and place nature. On the other hand, Jangguso Place(杖?所, Place of Scholars) in the vicinity of Yongyudam was the place of resting and amusement for scholars from Yeongnam Province, to name a few, Kim Il-son, Cho Sik, Jung Yeo-chang and Kang Dae-su, where they experienced and recognized Jirisan Mount as the scenic living place. Letters Carved on the rocks at Jangguso Place are memorial tributes and monumental signs. Around Yongyudam, there are 3 stairs, letters chiseled on the rocks and the water rock artificially built to collect clean water, which are traditional scenic remains detectable of territoriality as the ritual place. In addition, The letters on the rock at Yongyudong-mun(龍遊洞門) discovered for the first time by this study are the sign promoting Yongyudam as the place of splendid landscape. The laconism, 'It is the Greatest Water in Jirisan Mount(方丈第一山水)' on a rock expresses the pride of Yongyudam as the representing scenic place of Mount Jirisan. Other than those, standing rocks such as Simjindae Rock, Yeong-gwidae Rock and Ganghwadae Rock show the sign that they are used as amusement and gathering places for ancestor scholars, which add significance to Yongyudam. By this study, it was possible to verify that Yongyudam in Mount Jirisan is not simply 'the scenic place in the tangible reality' but also has seamlessly inherited as the traditional scenic attraction spiritualized by overlapped historical and cultural values. Yongyudam, as the combined heritage by itself, shows that it is the product of the place nature as well as unique ensemble of cultural scenic attraction inherited through long history based on natural scenery. It is certain that not only the place value but also geographical, geological, historical and cultural values of Yongyudam are the essence of traditional scenic attraction, which should not be disparaged or damaged by whatever political or economic interests and logics.