• International Journal of Highway Engineering
• /
• v.2 no.1
• /
• pp.135-145
• /
• 2000

A new procedure needs to be developed to predict the dynamic layer properties under moving truck loads. In this study, a computer code to evaluate layer moduli of asphalt concrete pavement from measured interior deflections at various depths were developed and verified from numerical model tests. Interior deflections of the pavement are measured from Multi-Depth Deflectometer(MDD). It was found that errors between the given and backcalculated moduli in numerical analysis were less than 0.32% for several numerical models tested. When impact loads were used, a technique to determine the depth to virtual rigid base was proposed through the analysis of compressive wave velocity and impulse loading durations. It was found that errors between the given and backcalculated moduli in numerical analysis were less than 0.114% when virtual rigid base was considered in numerical analysis. The pavement behavior must be evaluated under various vehicle speeds when determining the dynamic interaction between the loading vehicle and pavement system. To evaluate the dynamic behavior on asphalt concrete pavement under various vehicle speeds, truck moving tests were carried out. From the test results with respect to vehicle speed, it was found that the vehicle speed had significant effect on actual response of the pavement system. The lower vehicle speed generates the higher interior deflections, and the lower dynamic modulus.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.145-155
• /
• 1997

In this study, static and dynamic transient analysis of tracked vehicle structure with recoil impact load is performed for transient impact and traveling load using ANSYS and ABAQUS FEM codes. When transient impact loads are applied at tracked vehicle, the maximum dynamic Von Mises stress occurs between beam stiffener of upper plate and race ring and stress level is about 390-450 MPa. The results of transient analysis shows similar level and tendency with static stress with dynamic force effect of 1.6. The excessive stresses occur around the race ring for the both cases. When the traveling loads are applied on the tracked vehicle, the maximum Tresca stress occurs around suspension #1 and is about 450 MPa and results of static and nonlinear transient analysis are quite similar.

• Journal of the Korean Society for Railway
• /
• v.14 no.1
• /
• pp.57-65
• /
• 2011

The estimation of traffic safety and passenger comfort when the train is running on the bridge is a estimation unique to the railway bridge. The standards for such estimation are included in the Eurocode, the Shinkansen design criteria, and the design guideline of the Honam High-speed railway. The items are bridge responses including vertical displacement of bridge, vertical acceleration, and slab twist. In principle, a direct estimation based on the train responses has to take place. However, the estimation based on the bridge responses can be seen as an indirect estimation procedure for the convenience of the bridge designer. First, it is general practice that traffic safety can be verified as a derailment coefficient or wheel load decrement The general method of estimating passenger comfort is to calculate the acceleration within the train car-body. Various international indexes have been presented for this method. In the present study, traffic safety and passenger comforts are estimated directly by bridge/train interaction analysis. The acceleration and wheel load decrement are obtained for the estimation of traffic safety and passenger comforts of a suspension bridge which has main span length of 300m. Also, the consideration of seismic load with simultaneous action of moving train is done for bridge/train/earthquake interaction analysis.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.135-144
• /
• 2008

The dynamic loads imposed by moving vehicles have variations in the magnitude due to the surface roughness of the pavement systems and the larger dynamic loads than the design loads may affect the pavement performance. This paper presents variations of the moving dynamic vehicle loads due to the pavement surface roughness. This study was performed as a basic study to apply the pay factor to the surface roughness for the improvement of pavement quality and performance. The profile data was obtained from the old and new pavements and the analysis was performed to investigate the dynamic loads when vehicles move on the pavements having those profiles. The artificial profiles were also developed to find the effects of the vehicle speed, wavelength and amplitude of the surface roughness on the dynamic vehicle loads. The increase in the load magnitude due to the surface roughness affects the stresses and strains of pavements and finally reduces the pavement life. The methodology to obtain the relationship between the surface roughness and the pavement performance was proposed in this study.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.225-234
• /
• 2008

This study was carried out to select proper loading speed for deformation strength ($S_D$) of asphalt mixtures. Kim test using loading head of diameter(40mm) with radius(10mm) was conducted to measure $S_D$ in different loading speed (10mm/min, 30mm/min, 50mm/min, 70mm/min) and wheel tracking test was also conducted. The regression analyses between the So values and WT results were carried out by loading speeds. Higher $S_D$ was observed as increasing loading speed. This means that loading speed is a high influencing factor on $S_D$. The loading speed of 30mm/min was found as an optimum for better correlation with WT results than any other speeds from the regression analysis between $S_D$ and wheel tracking test results. $S_D$ value measured at other loading speed than 30mm/min has to apply the conversion coefficients.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.8
• /
• pp.743-750
• /
• 2016

Track rollers are the key parts that support the weight applied to the caterpillar track of construction machinery. The operating conditions of construction machinery are harsh; hence, the track rollers exposed to these conditions can experience failures such as oil leakage and breakdown of the machine, because of impacts during driving. The failure of track-rollers has a major effect on the operation of the construction machinery. Therefore, each manufacturer tries to evaluate the performance of their products by conducting a self-test. However, only the vertical loads applied to the track rollers are considered in most of the self-tests. This method has the problem of ignoring the horizontal loads that are applied to the track rollers while rotary driving, and hence it does not create the practical operating condition of the construction machinery. In this study, we have determined the experimental conditions that effectively consider the magnitudes of the vertical and horizontal loads. The results of simulations and experiments conducted to assess the influence of horizontal loads on the failure of track rollers are presented in this paper.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.119-130
• /
• 2006

The behavior of continuously reinforced concrete pavement (CRCP) and the effect of the steel ratio on the behavior under moving wheel loads were investigated in this study. The CRCP sections having different steel ratios of 0.6, 0.7, and 0.8% were considered to evaluate the load transfer efficiency (LTE) at transverse cracks and to investigate the strains in CRCP when the system is subjected to moving vehicle loads. The LTEs were obtained by conducting the falling weight deflectometer (FWD) tests and the tests were performed at three different times of a day to find the curling effect due to the daily temperature changes in CRCP. The strains in the concrete slab and the bond braker layer of the CRCP system under moving vehicle loads were obtained using the embedded strain gages. The results of this study show that the LTEs at transverse cracks are very high and not affected by the time of testing and the steel ratio. The strains in CRCP under vehicle loads become smaller as the vehicle speed increases or as the wandering distance increases; however, the strains are not clearly affected by the steel ratio.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.477-480
• /
• 2011

장경간 케이블 교량은 과도한 변위 발생 등의 이유로 엄격한 안전성 및 사용성이 요구되는 철도교량에서는 제한적으로 적용되고 있다. 즉, 철도교량으로서 요구되는 주행안전성과 승차감을 만족하기 위해서는 면밀한 분석이 필요하다. 본 연구에서는 교량/열차 상호작용 해석을 수행하여 열차에서의 응답을 통해 교량 상을 주행하는 열차의 주행안전성 및 승차감을 직접적으로 평가하고자 하였다. 즉, 중앙경간 300m의 현수교를 주행하는 KTX 열차에 대하여 열차 내부의 가속도와 윤중감소율을 구해 평가하는 방법을 취하였다. 또한, 이동 열차하중과 지진하중이 동시에 작용할 경우를 고려한 교량/열차/지진 상호작용해석을 수행하여 지진 시의 응답을 평가하였다.

• Computational Structural Engineering
• /
• v.4 no.4
• /
• pp.24-28
• /
• 1991

본 연구용역에서는 반도기계주식회사의 의뢰에 의거하여 Manbridge Crane의 지진하중에 대한 구조물의 안전성을 평가하였다. 구조해석은 유한요소 모형을 사용하여 사하중, 활하중 및 OBE(Operating Basis Earthquake)와 SSE(Safe Shut-down Earthquake)의 지진하중에 관한 해석을 수행하였다. Crane설치지점의 층응답스펙트럼을 입력으로 한 응답스펙트럼해법으로 지진해석을 수행하였다. Trolley의 위치와 정격하중의 유무에 따라서 5개의 구조모형을 작성하여 해석을 수행하였으며, 지진해석에는 35개의 자유진동모드가 고려되었다. 구조해석을 통하여 1) 구조부재의 과도응력 발생여부, 2) 보강재의 좌굴 가능성, 3) Hoist Rope의 안전성, 4) Crane의 전도의 가능성 및 Seismic Lug의 안전성, 5) 지진하중에 대한 제동력, 6) Crane의 주행 Rail로부터의 탈선여부, 7) Traversing Rail의 수직처짐, 8) 주행 Rail 및 End Stopper의 Anchor Bolt의 안정성, 9) Fuel Basket과 Handrail의 안전성을 검토하였다. 해석결과를 바탕으로 설계시방서에서 제시한 모든 설계요구조건을 만족시킬 수 있도록 수직 Frame의 보강부재를 보강하고, Hoist Rope 용량을 증가시키도록 제안하였다.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.485-498
• /
• 2014

In this paper, vehicle-bridge interaction analysis under a series of moving vehicles to simulate a lane load was performed to estimate impact factor of the main cable, hanger and girder for the selected suspension bridges with 404m and 1545m main span. Korea Bridge Design Code(Limit State Design) was selected for the live model in which KL-510 truck was modeled 6-d.o.f. vehicle and a lane load was simulated by a series of single-axle vehicles. For the 404m main span bridge, hinge-type and floating-type girders at the tower were considered to examine the impact factor according to the connection and supporting type of the girders. The parameters considered herein are the types of live load-a truck only and a truck plus lane load, eccentricity of moving vehicles, road surface roughness and vehicle speed. The road surface roughness was randomly generated based on ISO 8608 and it was applied to the truck only. The impact factors were also evaluated by using the influence line method that is commonly used in cable-supported bridges and compared with those from vehicle-bridge interaction analysis.