• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.9
• /
• pp.1166-1174
• /
• 2000

This work presents a two-dimensional quasi-steady state model to study the fluid flow and heat transfer in high-power density welding process of thin AISI-304 stainless steel plates. The enthalpy method and the finite volume method were used for a numerical analysis of the mushy region phase change as well as the heat flow at the weld pool and the heat-affected zone. The results show that the mushy region distributed around the weld pool becomes wider downstream and the surface heat losses by convection and radiation can be significant factors in welding process especially when a welding speed is relatively low.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.282-282
• /
• 2009

Forest Fire can cause a serious damage to overhead conductors. Therefore, the detailed investigation for the changes of mechanical and electrical properties of damaged conductors should be carried out to understand the effect of forest fires on conductors. This is very important to maintain transmission line safely. Specimenes for this study were Al conductores of ACSR $410mm^2$, ACSR 480 R and ACSR $240mm^2$. This paper describes the changes of mechanical and electrical properties of same flame exposed Al conductor. The detailed will be given in the text.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.387-390
• /
• 2009

본 연구에서는 유한요소 해석 상용 소프트웨어 중 하나인 ABAQUS 을 이용하여 기존의 ABAQUS 가 고려하지 못했던 상변태와 변태소성을 고려하는 프로그램을 개발하고 이를 이용하여 실제 용접 공정 해석을 수행하였다. 열원의 크기와 분포, 속도, 이동 경로 등을 모사하기 위해서 DFLUX 를,복합상에서의 재료의 열팽창 계수와 열변형률을 정의하기 위해서 UEXPAN 을 코딩하였다. 또한 재료의 상분율 및 온도에 따른 열적 구성 거동을 정의하기 위해서 UMATHT를 상변태와 그에 따른 변태소성을 반영하여 응력을 갱신하는 UMAT을 구현하였다. User Subroutine UMAT 은 아탄성 수식화와 합분해를 이용하여 증분형(Rate-form)으로 응력을 갱신하며 아탄성 수식화를 이용하여 상변태와 변태소성이 고려된 대응접선 계수가 새롭게 정의되었다. 프로그램의 타당성과 정확성을 검증하기 위해서 이미 그 정확성이 입증된 GFC(General Finite-element Code)를 사용하였다.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.263-263
• /
• 2014

Low temperature pyrolysis of woody biomass has been conducted to produce highcalorie torrefied fuel. In this experiment, to maximize the energy efficiency in heat transfer, flue gas is directly used for heat source in the torrefier. To accomplish the oxygen free environment in the torrefaction reactor, a burner has been developed and it can be runned with fuel rich state. An inner central axis rotating type of reactor was applied in experiment. To use the calorific gases produced from torrefier, another burner is developed to combust them.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.349-350
• /
• 2016

In the magnetically coupled wireless power transmit (WPT), the study of the multi-dimensional transmission coil to solve the low power transmission efficiency from the location of transmit coil and receiving coil is being developed. This paper, an important step in this study, presents the magnetically coupled model of the WPT system consist of the two-dimensional transmit coil and verifies by the simulation and experiment. The induced model in this paper can be used to design the WPT circuit and controller for the maximum transmission efficiency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.4 s.247
• /
• pp.428-434
• /
• 2006

Pulse laser welding of AISI 304 stainless steel plate was simulated to find optimal welding conditions by using commercial finite element code MARC. Due to geometric symmetry, a half model of AISI 304 stainless steel plate was considered and user subroutines were applied to boundary condition for the heat transfer. Material properties such as conductivity, specific heat, mass density and latent heat were given as a function of temperature. A moving heat source was designed on the basis of experimental data. As a result, Nd:YAG laser welding for AISI 304 stainless steel was successfully simulated and it should be useful to determine optimal welding condition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.349-356
• /
• 1986

For the extension of application in flash method measuring the thermophysical properties of materials, the heat diffusion equation with the heat transfer loss from front, rear, and circumferential surfaces of two layer cylinderical sample is mathematically analyzed by means of Green's function for axially symmetric pulse heating on the front of samples. The solutions are applied to determine the unknown thermal diffusivity of the two materials and analyzed the measurement error due to heat loss and finite pulse time effects.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.1
• /
• pp.73-83
• /
• 2007

This study aims to examine the effects on nociceptive neuron excitability by application of electroacupuncture in rat with inflammation. It used 20 rats for experiment, divided them into control group, electroacupuncture group (EA group), caused hyperalgesia by injecting ${\lambda}$-carrageenan into hindpaw and conducted treatment three times for experimental period. Change of NFR(reaction time, RMS) showed no significant differences among EA group showed significant differences compared to control group from 48 hours. This study showed that EA group had an effect on nociceptive neurone excitability. Therefore, it is considered that electroacupuncture for pain control will be very desirable.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.1 no.2
• /
• pp.31-38
• /
• 2003

This study was to compared the effectiveness of piroxicam gel phonophoresis with conventional ultrasound therapy in knee osteoarthritis. Eighteen patients with a means age of $55.7{\pm}5$ years were randomly assigned to phonophoresis or ultrasound groups. Continuous ultrasonic waves of 1 MHz frequency and $1\;W/cm^2\;SATA_i$ were applied for 5 minutes to the target knee joint. This study indicated their pain level by marking on a visual analog scale(VAS) at the start of treatment and at the end of 3day. Osteoarthritis VAS scores, pain on rest state, non weight bearing range of motion, 20 meters walking, and walking step by the patients were evaluated before and after therapy. Both therapeutic modalities were found to be effective and generally well tolerated after 3 therapy sessions. But piroxicam phonophoresis was not superior to conventional ultrasound in patients with knee osteoarthritis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.211-212
• /
• 2010

하역장치가 장착된 모바일하버 선박은 새로운 해상운송시스템 개념으로, 임시정박지에서 대형 컨테이너 선박에 계류하여 해상상태 3 이하 조건에서 선박간 해상계류 상태에서 신속하면서 효율적인 컨테이너 하역작업을 수행하는 것이다. 모바일하버와 관련한 주요 연구로는 고속하역시스템, 부유체 구조 설계, 안벽하역시스템 해석 및 작업크레인 설계 둥의 원천 기술 개발을 중심으로 수행되었다. 본 연구는 모바일하버 선박의 하역작업 중 동척 안전성 확보를 위한 계류안정화시스템을 개발하고자 하는 것으로, 국내외 계류장치에 대한 현황 분석을 기초로 현재 선박에 탑재되어 있는 의장장치인 윈치시스템에 계류안정화 기능을 추가시킨 포지셔녕 윈치를 개발하여 모선과의 상대운동을 최소화하는 방안에 대한 개념 설계를 제안한다.