• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.202-202
• /
• 2011

Performance of the raw water-source heat pump system with a thermal storage tank has been analyzed in winter season. The raw water is transferred through the multi-regional water supply system from Han river. Raw water is large temperature difference resource compared with groundwater. Although the raw water temperature drops to $0.6^{\circ}C$ due to the heavy snowfall and the severe cold in late January and early February, 2010, the system has been normally operated without any trouble this winter. The unit COP and system COP considered all pump power consumption were estimated based on the second-by-second data of the all sensors. The monthly averaged unit COP and system COP are 3.37 and 2.76 respectively with $1.4^{\circ}C$ of raw water in January, 3.55 and 2.89 with $1.6^{\circ}C$ raw water in February, 3.82 and 3.15 with $5.4^{\circ}C$ raw water in March. The performance of the system are increased with raw water temperature, and the COPs are higher than the water-to-air heat pump system using relatively high temperature raw water from Daecheong reservoir because the water-to-water system was operated on the full load condition and was stopped when the thermal storage tank was full of the high temperature water.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.81-81
• /
• 2011

본 연구는 $CO_2$를 냉매로 하는 급탕용 히트펌프 성능특성을 평가하는 시험 평가법에 대하여 국내 실정에 맞는 시험평가법을 개발하기 위한 목적으로 기존 $CO_2$ 급탕용 히트펌프의 평가방법을 분석하고자 한다. 현재 $CO_2$ 급탕기 또는 급탕용 히트펌프 제품은 일본에서 2000년 초반부터 에코큐트라는 제품으로 일본 급탕용 난방기기로 판매되고 2009년을 기초로 누적판매 대수가 150만대에 이르고 있다. 국내에는 2008년 후반부터 공기열원 또는 폐열원 등을 이용한 급탕용 히트펌프 제품이 일부 수입되어 목욕탕, 찜질방과 같은 숙박업소용으로 판매되고 있는 추세이다. 국내에서는 급탕용 열펌프의 제품의 정의가 아직 정립되지 않고 이에 대한 시험평가방법이 전무한 실정이기 때문에 현재 일본의 가정용 열펌프 급탕기의 규격을 토대로 실제 급탕용 열펌프의 시험을 수행하여 급탕용 히트펌프의 급탕성능특성을 평가하는 방법을 개발하고자 한다. 시험시료는 일본에서 판매되고 있는 급탕용 히트펌프(D사) 제품을 이용하였으며, 현재 일본에서 사용하고 있는 JRA4050 규격에 의해 급탕성능평가를 진행하고 급탕성능평가 지표 등을 국내 유사조건과 급탕성능특성의 평가방법을 비교분석하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.508-515
• /
• 2011

Bovine incisor was investigated using active infrared thermography(IRT) to visualize crack on bovine teeth. An artificial crack was carefully created in bovine incisor sample by compression load of universal tensile machine. While applying a sinusoidal heat wave to the cracked bovine incisor through halogen lamp, consecutive digital infrared images was captured from the sample surface at a frequency synchronized with heat excitation. Phase information of thermal image was calculated by four-point correlation method and processed to produce the phase image of bovine incisor. This phase image showed clearly the crack on the incisor, which was hardly detected in traditional passive thermography.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.15-19
• /
• 2006

유출지하수나 지표수를 열원으로 하는 지열히트펌프의 Pond Loop형 열교환기를 개발하기 위하여 미국에서 상용화된 Slim-Jim 열교환기와 본 연구에서 자체설계, 제작한 Pond-loop type의 열교환기를 유동이 없는 유출수조 내에서 수조온도가 변화함에 따라 일정한 열교환기 입구온도를 유지하면서 열전달량의 변화를 측정하였다. 그 결과 유출수를 Heat Source로 사용하는 경우 Slim-Jim에서는 $8,000{\sim}11,000 kcal/hr$의 열량이 전달되었고, 자체 제작한 열교환기에서는 $11,000{\sim}16,000kcal/hr$의 열량이 전달되었다. 유출수를 Heat Sink로 사용할 경우 Slim-Jim에서는 $2,500{\sim}7,000 kcal/h$의 열량이 전달되었고, 자체제작한 열교환기의 경우, $6,800{\sim}14,00 kcal/hr$의 열량이 전달되었다. 측정된 열전달량을 바탕으로 총괄열전달계수를 구한 결과 Slim-Jim 열교환기의 경우 $210{\sim}340 kcal/hr\;m^2{\circ}C$, 자체개발한 열교환기의 경우 $350{\sim}590 kcal/hr\;m^2{\circ}C$로 나타나 자체 개발한 열교환기의 열전달 성능이 비교적 우수함을 입증하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.5
• /
• pp.178-185
• /
• 2016

This study describes the analysis of a 20 MW chilled water plant used for the IT cooling of a recently constructed data center in Korea. The CFD model was developed with the aim of evaluating the impact of problems such as chiller failure on the water and air temperatures in the cooling system. The numerical model includes the chilled water hydraulic network and individual water-to-air CRAC units. The coupling between the IT server room air temperature levels and the cooling plant has enabled a full assessment of the cooling system design in response to system fault conditions to be performed. The paper examines an emergency situation involving the failure of the cooling plant, and shows how the inherent thermal inertia of the system along with additional inertia achieved through buffer systems allowed a suitable design to be achieved.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.157-161
• /
• 2007

최근에 설치된 마산기상대의 windprofiler의 기기보정을 위한 비교관측을 하기에 앞서 마산기상대의 기상 관측자료를 이용하여 마산지역의 기후 변화 현황을 알아보았다. 그 결과, 마산지역은 최근 5년간 평년에 비하여 건조해졌으나 연강수량과 강수강도는 약한 증가현상을 나타내었다. 그리고 $20^{\circ}C$의 기온빈도가 증가하여 마산지역이 상당히 따뜻해 진 것으로 나타났다. 마산연보(2006)에 의하면 마산시에는 자동차 등록 수는 매년 증가하여 2005년 현재 138,241대를 나타내어 도시화로 인한 인공열원이 증가하였다고 볼 수 있다. 그렇지만 인구는 1998년 435,343명을 최고치로 나타낸 이후 매년 감소하는 추세를 보이고 있으며 사업체수 역시 1995년 35,622개 이후 점차 감소하고 있는 추세이다. 더불어 도심지 공원은 2005년 현재 91개까지 증가하였으며 공원 총면적 또한 2001년 이후 계속 증가하고 있는 추세이다. 마산지역의 기온이 $1985{\sim}2005$년 평년치보다 최근 5년간 상당히 따뜻해졌지만 자동차로 인한 인공열원의 증가가 인구 및 사업체 감소, 도심지 공원수와 면적 및 해풍 빈도의 증가와 상쇄되어 도시화의 영향이 다소 약하게 나타났으나 지구온난화와 더불어 마산지역의 기온도 상승하고 있음을 알 수 있다. 향후 지구온난화에 대한 영향을 지속적으로 조사할 필요가 있을 것으로 생각된다.

• Journal of Hydrogen and New Energy
• /
• v.23 no.1
• /
• pp.65-72
• /
• 2012

Rankine cycle using ammonia-water mixture as a working fluid has attracted much attention, since it may be a very useful device to extract power from low-temperature heat source. In this work, the thermodynamic performance of regenerative ammonia-water Rankine cycle is thoroughly investigated based on the second law of thermodynamics and exergy analysis, when the energy source is low-temperature heat source in the form of sensible energy. In analyzing the power cycle, several key system parameters such as ammonia mass concentration in the mixture and turbine inlet pressure are studied to examine their effects on the system performance including exergy destructions or anergies of system components, efficiencies based on the first and second laws of thermodynamics. The results show that as the ammonia concentration increases, exergy exhaust increases but exergy destruction at the heat exchanger increases. The second-law efficiency has an optimum value with respect to the ammonia concentration.

• Journal of Hydrogen and New Energy
• /
• v.29 no.2
• /
• pp.148-154
• /
• 2018

This paper presents a comparative analysis of thermodynamic performance of ammonia-water Rankine cycles with and without regeneration and Kalina cycle for recovery of low-temperature heat source. Special attention is paid to the effect of system parameters such as ammonia mass fraction and turbine inlet pressure on the characteristics of the system. Results show that maximum net power can be obtained in the regenerative Rankine cycle for high turbine inlet pressures. However, Kalina cycle shows better net power and thermal efficiency for low turbine inlet pressures, and the optimum ammonia mass fractions of Kalina cycle are lower than Rankine cycles.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.8
• /
• pp.468-474
• /
• 2009

Ground water source heat pump system is the oldest one of the ground source heat pump systems. Despite of this, little formal design information has been available until recently. The important design parameters for open system are the identification of optimum ground water flow, heat exchanger selection and well pump. In this study, the capacity of 50 RT system of two well type ground water heat pump system was used. As a result, static water level was -7 m and the level during the heating operation was -32 m, cooling operation was -40 m. The initial static water level recovered within 48 hrs. The temperature of ground water is $15.6^{\circ}C$ for heating season and $16.2^{\circ}C$ for cooling season and does not depend on the outdoor temperature. Operation efficiency of the system shows that, COP 3.1 for heating and COP 4.2 for cooling.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.7
• /
• pp.392-397
• /
• 2013

To fulfill the demands concerning energy efficiency for zero energy buildings, various technologies of architects and engineers are required. This study aims to estimate the thermal performance of heat source equipment in which part load characteristics are considered in an office building. Overestimation of heat source equipment was reviewed through literature survey, and heating and cooling loads depending on the capacity and division of the equipment were analyzed through a simulation program (DOE-2.1E). The conclusions gained from this study are as follows; 1) The more the division of equipment, the less the heating and cooling energy consumption. 2) When a large item of equipment is divided into two small items of equipment, the optimum application rate showed as 5:5 for chiller, and 7:3 for boiler, respectively.