• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.103-109
• /
• 2005

At the adjacent sea area of Busan Central Wharf, a variety of vessels, such as middle-large passenger ships, small fast sailing ships, container ships, cargo ships and working ships as well as small miscellaneous vessels are freely sailing comparatively without special steering and sailing Rules and marine traffic control because exclusive wharfs in accord with their purpose and use have been arranged in each wharf. In this research, we analyzed traffic stream and navigational characteristics of main traffic route based on statistics and distribution of tracks by ship's type and tonnage of the passing vessels after conducting marine traffic survey twice using exclusive software by targeting the sea area during the period of time. We examined the traffic safety of the passing vessels by classifying the sea area by each function based on the analysis about this traffic situation, and analyzing the effect by designating 'Buknea passage'. We also studied the plan for the effective rearrangement of Central Wharf considering basically the traffic safety oif arrival and departure in a point if view of navigators.

• Korean Journal of Psychosomatic Medicine
• /
• v.18 no.1
• /
• pp.30-39
• /
• 2010

Objectives：Assessment of sleep disturbance is an essential part of the diagnostic criteria used for several psychiatric disorders. Change in sleep patterns over time may indicate response to treatment. In clinical practice, sleep is usually evaluated subjectively by patient self-report. This study was aimed to compare subjective sleep assessment with objective sleep measurement by actigraphy in psychiatric inpatients. Methods：A total of 32 psychiatric inpatients were studied. Patients were asked to wear a wrist actigraphy for three consecutive days and nights and to fill out a sleep log each morning. The severity of depression and anxiety was evaluated according to Beck Depression Inventory and State-Trait Anxiety Inventory on the first day of the study. The subjective level of satisfaction with quality of sleep was also evaluated according to visual analog scale. Nurses assessed sleep at one hour interval between 10:00 PM and 6:00 AM for three consecutive nights. Results：There was statistically significant difference of sleep latency between patient's sleep log and acti-graphic measurement. Nursing reports were more consistent with actigraphic measurement than sleep log. Interestingly, subjectively poor sleepers show no significant difference in sleep parameters compared with those of good sleepers. Subjectively poor sleepers report longer sleep latency than that of actigraphic assessment. The discrepancy between subjective and objective assessment of sleep latency was significantly correlated with scores of Beck Depression Inventory and State-Trait Anxiety Inventory. Conclusion：These results show that there are discrepancies between subjective and objective assessment of sleep. The discrepancy of sleep assessment could be influenced by severe depression and anxiety. Especially objective sleep measurement is needed to assess sleep in psychiatric inpatients with severe depression or anxiety and the subjectively poor sleepers for more reliable measurements.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.32-41
• /
• 2015

The Metropolitan Area Green Heat Project (MAGHP), which collects unused heat gathered from power plants, steel works, landfills in western Metropolitan area and distribute it to integrated energy business (IEB) companies, is proposed for the purpose of enhancing energy efficiency and providing low-price heat for IEB companies. Therefore, in order to decide on whether to initiate the MAGHP, the economic feasibility analysis of the project is widely demanded. This paper attempts to consider and measure four economic benefits: heat supply benefit, production cost reduction benefit, greenhouse gas mitigation benefit, and air quality improvement benefit. In addition, the paper tries to conduct the economic feasibility analysis. The project requires three-year investment and thirty-year operation. Three important findings emerge from the analysis. First, its net present value is computed to be 1,269 billion won and more than zero. Second, its benefit/cost ratio is calculated to be 1.72 and bigger than 1.0. Third, its internal rate of return is estimated to be 24.26% and larger than the social rate of return, 5.5%. In conclusion, the MAGHP is socially profitable and should be conducted immediately.

• Journal of Energy Engineering
• /
• v.25 no.2
• /
• pp.86-93
• /
• 2016

The existence of high temperature equipment such as steam pipe, deaerator, steam storage tanks and main steam stop valves makes relatively higher workplace temperature in a power plant of the turbine building. In order to cool down the air temperature in the turbine building, the outside air flow with lower temperature passes through the window and the hotter air in the building is extracted to the outside by installing the ventilation fan on the roof. Nevertheless, higher temperature regions near the high temperature equipment still exist in the turbine building and additional fans for the temperature reduction in the higher temperature region should be examined for the optimal location and mass flow rate. The purpose of the present study is to suggest the optimized location and capacity of the additional ventilation fans for a comfortable working environment. From the present study, it has been elucidated that the additional ventilation fans might be located near the high temperature deaerator and it could reduce the mean temperature in the turbine building by $3.0^{\circ}C$ and the temperature near the deaerator could be reduced by $4.2^{\circ}C$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.13-19
• /
• 2014

The feed temperature has an effect on the performance during desalination of seawater by membrane separation. When the permeate flux intends to increase using the waste heat, it is necessary to analyze the effect of feed temperature precisely on the membrane performance. The experiments were carried out to investigate the performance of membranes by varying the seawater temperature from $10^{\circ}C$ to $60^{\circ}C$. The increase of permeate flux with increase of feed temperature was interpreted as the change of water viscosity and the membrane itself. While the increase of permeate flux could be predicted by the viscosity change in case of nanoflitration membrane, there exists 30% difference between the experiment data and the prediction by the viscosity change in case of reverse osmosis (RO) membrane, which seems to be due to 8% decrease of the pore size in 60caused by the contraction of membrane with the increase of temperature. Therefore, the desalination of seawater should be carried out within the range that the elevation of temperature does not cause the alteration of membrane itself even for the purpose of increasing the permeate flux.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.264-271
• /
• 2004

A three-dimensional numerical mesoscale model by Pielke's estimation (University of Virginia Mesoscale Model, UVMM) was applied to investigate the effects of land characteristics including land-humidity, land-roughness and land-albedo on some micro-climatic coefficients and the air cooling capacity. The results indicated that land-characteristics exposed a significant effect on air cooling. Air cooling effects between in urban and agricultural areas were compared and the effects were much higher in agricultural area. Air cooling effects of weed species were different and when converted into economic values by diesel oil price the effects were ranged from 411 to 816 Won/plant.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.75-81
• /
• 1983

The performance of the flat-plate solar collector with rock-pile thermal storage medium and the drying characteristics of rough rice and red pepper by use of natural air and of supplementary heated air by the solar drier were studied. The thermal efficiency of the flat-plate solar collector was average 25.4 percent and the overall heattransfer coefficient of the collector was approximately $38.13kJ/hr.m^2^{\circ}C$. The flat-plate collector was able to supply the supplementary heated air which was about $7^{\circ}C$ higher than the ambient air temperature during the daytime and about $3^{\circ}C$ higher than during the night. For rough rice drying of grain moisture content front 24.5 to 14.5%, it took 18 days in the natural air system, 12 days in the tubular solar collector and 10 days in the flat-plate solar collector. For red pepper drying from it's moisture from 81.0 to 15.0%, 68 hrs required under conventional sun drying system, but 38 hrs in tubular solar collector and 36 hrs in the flateplate solar collector. The changes of capsanthin and capsaicine content were investigated at various drying system, and little difference was found among the drying system.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.47-51
• /
• 2014

This paper is to analyze and study the fire examples in respect of intake and exhaust, alternator tuning and inflow of inflammables on exhaust part in a car. In the first example, the driver diverted the intake and exhaust system for tuning of a car. Stopping a car to rest for moment, the flammable styrofoam scrap go into exhaust pipe that installed with exhaust manifold newly. It certified the fact that catched fire gradually, furthermore enlarged the fire by leaking fuel. In the second example, the driver enlarged the generator performance to divert the audio system in side room., it knew the fact that the electric wiring connected with generator gave the cause of outbreak a fire by overheating. In the third example, the serviceman replaced the engine oil using funnel-shaped, he put the a bottle of plastic pat onto engine cover carelessly. Consequentially, it found the fire occurrence in the engine room. Therefore, the driver never divert the intake and exhaust and generator construction of a car abnormally. Also, repairing and inspecting a car, the serviceman have a care to not occur the fire by inflammables.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.384-391
• /
• 2005

A polymer optical microring resonator, which is laterally coupled to a straight bus waveguide, has been proposed and demonstrated using a nanoimprint technique. The propagation loss of the ring waveguide and the optical power coupling between the ring and bus waveguides was calculated by using a beam propagation method, then the dependence of the device performance on them was investigated using a transfer matrix method. We have especially introduced an imprint stamp incorporating a smoothing buffer layer made of a silicon nitride thin film. This layer played an efficient role in improving the sidewall roughness of the waveguide pattern engraved on the stamp and thus reducing the scattering loss. As a result the overall Q factor of the resonator was greatly increased. Also it reduced the gap between the ring and bus waveguides effectively to enhance the coupling between them, without relying on the direct writing method based on an e-beam writer. As for the achieved device performance at the wavelength of 1550 nm, the quality factor, the extinction ratio, and the free spectral range were ~103800, ~11 dB, and 1.16 m, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.87-87
• /
• 2000

이온빔 증착에 있어서 전자의 조사가 이온빔 증착기구에 미치는 영향에 대한 연구는 지금까지 보고 되어지지 않았다. 특히 전자의 조사가 증착층의 물성에 영향을 미칠 수 있느지에 대하여 정량적인 결과를 실험을 통하여 제시한 보고는 내가 아는 한 존재하지 않는다. 한편 이와같이 박막 증착에 있어서 전하가 증착되어지는 박막의 물성에 미칠 수 있는 영향에 대해서는 많은 과학자들의 관심사이기도 하다. 본 실험에서는 kaufman ion gun을 이용하여 질소 양이온을, 그리고 Cs+ ion gun을 이용하여 탄소 음이온을 조사하고 이들을 이용하여 CN 박막을 증착하였다. 질소 양이온의 에너지는 100eV, 이온밀도는 70$\mu$A/$\textrm{cm}^2$로 고정하고, 탄소 이온빔(80$\mu$A/$\textrm{cm}^2$)의 에너지를 200cV까지 변화시켜가며 증착하였다. 이때 증착층의 특성에 음 전하의 효과를 유발하기 위하여 350~360$\mu$A/$\textrm{cm}^2$의 전자빔을 이온빔 증착과 동시에 추가로 조사하였고 이의 특성을 전자빔을 조사하지 않고 증착한 CN 박막의 특성과 서로 비교하였다. 또한 증착 표면의 전하 축적에 의한 입사 이온빔의 에너지 감소에 의한 영향을 방지하기 위하여 증착되는 Si 기판에 HF (300kHz, 3.5V) bias를 가하여 주었다. 전자빔의 조사와 동시에 이루어진 CN 박막의 증착은 입사하는 탄소 음 이온빔의 에너지가 80eV에서 180eV 사이일때 원자밀도의 향상과 질소함량의 증가, 그리고 sp2C-N 결합대비 sp3C-N 결합의 향상이 이루어졌음을 확인하였다. 이는 이온빔 충돌에 의하여 피코쵸 정도의 시간대에 이루어지는 박막내의 collision cascade 영역에 이에 의하여 생긴 결함부위에 유입된 음 전하가 위치하면 전하주위의 원자와 polarization을 형성하고 이에 의하여 탄소와 질소의 결합을 형성하는데 필요한 자유에너지의 감소를 수반하는 방향으로 원자의 배열이 이루어지기 때문으로 사료된다. 이와같이 이온빔 에너지가 이온빔 증착 기구의 주요한 인자로 널리 인식되고 있는 kinetic bonding process에 있어서 이온 에너지에 의하여 activation energy barrier를 넘은후, 전자의 조사가 자유에너지를 낮추는 방향으로 최종 결합경로를 조절할 수 있기 때문에 이온빔 증착을 조절할 수 있는 또 하나의 주요한 인자로 받아들여질 수 있으리라 판단된다. 이온빔 프로세스에 의한 DLC 혹은 탄소관련 필름을 형성하는데 있어서 입사 이온빔의 에너지에 의하여 수반되는 thermal spike 혹은 외부 열원에 의한 가열은 박막층의 흑연화를 수반하기 때문에 박막의 sp3 특성을 향상시키기 위하여 회피하여야 할 요소이지만 thermal spike에 의한 국부 영역의 가열과 같은 불가피한 인자가 존재하는 상황에서 전자에 의한 추가 전하의 조사에 의한 최종결합경로의 선택적 조절은 박막의 화학적 결합과 물리적 특성을 향상시킬 수 있는 중요한 방법이 될 수 있다고 판단된다.