• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.2
• /
• pp.11-21
• /
• 2018

This study suggests desirable disaster safety education curriculum through analyzing the operational status of the school disaster safety management training course and demand survey of school staff. First, the problem of the disaster safety training course of the school is not connected with the lack of law and system and the school disaster safety job. Second, improvement of law and system and variety of training should be made to acquire professional knowledge. Third, it is necessary to divide curriculum into the following four categories, according to educational needs of public officials ; Educational administration officers course focused on facility safety, maintenance and disaster countermeasure. Educational officials in technical post course addressing approval and permission of school facility projects, seismic reinforcement of school building, etc. Educational supervisors course covering roles and responsibilities of the school safety supervisors in the event of disaster. Teaching staffs course focused on safety instructions for students. Fourth, it is found that lectures and experiential learning methods are the most desirable methods of teaching and learning, and the major ranks are earthquake disaster, fire, gas, typhoon, school road, and electrical safety.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.75-86
• /
• 2010

Objectives : We developed and proposed a guideline for safety and performance assessment of electric moxibustion apparatus (class II medical device). Methods : We drafted the guideline for safety and performance assessment of electric moxibustion apparatus by referring the existing standards, guidelines and measurement data from commercially available products. Temperature characteristics such as maximum temperature and ramp time, and physical characteristics such as weight, noise and diameter were measured. User friendliness was also evaluated for commercial devices. Results : This guideline only can be applied to the electric moxibustion apparatus where moxa is being heated by electricity for medical proposes. Maximum temperature of higher than $50^{\circ}C$ can be achieved mostly. Ramp rate of temperature seems to be reliable. Control of temperature is needed to be improved. Moxa and its derivative products seem to be regulated for reliable temperature performance for clinical application. Requirements for design and development of electric moxibustion apparatus are suggested : temperature indicator, temperature control and its accuracy, safety measure, surge protection, user friendliness and instruction for use (IFU). Design recommendation of the reduction of noise level and energy loss are suggested for better products. Conclusions : We proposed a guideline for safety and performance assessment of electric moxibustion apparatus to improve the quality of relating products and aid their commercialization by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.2
• /
• pp.49-61
• /
• 2005

Summary of Background Data: Myofascial pain syndrome (MPS) is a common painful muscle disorder caused by trigger points occurring in myofascial. MPS is a major cause of chronical pain and is the subject of further clinical examination. Purpose: To uncover effective intramuscular stimulation therapy (IMS), the patients' actively participation stretching exercise and stabilizing around shoulder girdle where trigger point provoking myofascial pain syndrome in usually occurred. Methods: 45 myofascial pain syndrome patients were randomly chosen and divided into 3 groups. The first group (G1) received only IMS therapy, The second group (G2) had both IMS and active stretching exercises administered and the final group (G3) was given IMS therapy and stabilizing exercises. Therapy intervention was given for 3 weeks, 3 times a week and then only stretching exercise for the second group and stabilizing exercise for the third group was given for another 3 weeks. The visual analogue scale was dine before the experiment, 3 weeks after the experiment and 6weeks after the experiment to measure subjective degrees of pain and pressure pain threshold to measure sensitivity improvement of trigger point and functional ability questionnaire to measure daily life performance. Results: There were no significant changes after 3 weeks but after 6 weeks, between GI and G2 and between G1 and G3 showed significant change of pain, pressure pain threshold and daily life performance. There were significant improvement of the measurement of degrees of pain, pressure pain threshold and improvement of daily life performance at different times for G1 showed change 3 weeks after the experiment, but there were no changes 6 weeks after the experiment. There were significant improvement of the measurement at different times for G2 and G3 showed change 3 weeks after the experiment and 6 weeks after the experiment. Conclusions: IMS therapy proved to be effective in inactivation of trigger points of the myofascial pain syndrome patients and stretching and stabilizing exercises beside it keep remedial value longer by improvement of pain and dysfunction that occurred by the trigger point.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.2
• /
• pp.62-70
• /
• 2005

The determination of peripheral nerve conduction velocity is an important part to electrodiagnosis. Its value as neurophysiologic investigative procedure has been known for many years but normal value of median and ulnar motor nerve was poorly reported in Korea. To evaluate of median and ulnar motor nerve terminal latency, amplitude of CMAP(compound muscle action potential), conduction velocity and F-wave latency for obtain clinically useful reference value. 71 normal volunteers(age, 19-65 years; 142 hands) examined who has no history of peripheral neuropathy, diabetic mellitus, chronic renal failure, endocrine disorders, anti-cancer medicine, anti-tubercle medicine, alcoholism, trauma, radiculopathy. Nicolet Viking II was use for detected terminal latency, amplitude of CMAP, conduction velocity and F-wave latency of median and ulnar motor nerve. Data analysis was performed using SPSS. Descriptive analysis was used for obtain mean and standard deviation, independent t-test was used to compare between Rt and Lt side also compare between different in genders. The results are summarized as follows: 1. Median motor nerve terminal latency was right 3.00ms, left 2.99ms and there was no significantly differences between right and left side and genders. 2. Median motor nerve amplitude of CMAP was right 17.26mV, left 1750mV and there was no significantly differences between right and left side and genders. 3. Median motor nerve conduction velocity was right 57.89m/sec, left 58.03m/sec and there was no significantly differences between right and left side and genders. 4. Median motor nerve F-wave latency was right 25.74ms, left 25.59ms and there was significantly differences between genders. 5. Ulnar motor nerve terminal latency was right 2.38ms, left 2.45ms and there was significantly differences between right and left side. 6. Ulnar motor nerve amplitude of CMAP was right 15.99mV, left 16.02mV and there was no significantly differences between right and left side and genders. 7. Ulnar motor nerve conduction velocity was right 60.35m/sec, left 59.73m/sec and there was no significantly differences between right and left side and genders. 8. Ulnar motor nerve F-wave latency was right 25.53ms, left 25.57ms and there was significantly differences between genders.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.2
• /
• pp.13-18
• /
• 2005

The ulnar nerve extends down the arm, across the elbow, and into the hand. It provides sensation to the little and ring fingers and activates many of the small muscles in the hand. The determination of peripheral nerve conduction velocity is an important part of ulnar nerve evaluation. The electrodiagnostic value as neurophysiologic investigative procedure has been known for many years but normal value of digital nerve was not reported in Korea. The purpose of this investigation was to measure the digital nerve conduction velocity of ulnar nerve for obtain clinically useful reference value and compare difference in each fingers and then compare with the other countries. 71 normal Korean volunteers (age, 19-65 years; 142 hands) examined who has no history of peripheral neuropathy, diabetic mellitus, chronic renal failure, endocrine disorders, anti-cancer medicine, anti-tubercle medicine, alcoholism, trauma, radiculopathy. Nicolet Viking II (EMG machine) was use for detected conduction velocity and amplitude of digital nerves in ulnar nerve. Data analysis was performed using SPSS. Descriptive analysis was used for obtain mean and standard deviation and independent t-test was used to compare with ring and little finger. Conduction velocity of the right ring finger was 57.44m/sec and little finger was 55.32msec. The left ring finger was 55.55msec and little finger was 54.11msec. Amplitude of the right ring finger was $30.28{\mu}V$ and little finger was $48.36{\mu}V$. The left ring finger was $30.67{\mu}V$ and little finger was $52.76{\mu}V$. There were significantly difference between ring and little in amplitude (p<.05) but there were no statistically difference between conduction velocity of ring and little finger (p>.05). The amplitude of little finger are greater than ring finger. The present results revealed that electodiagnosis can easily perform in little finger for digital nerve of ulnar nerve study.

• Journal of dental hygiene science
• /
• v.12 no.5
• /
• pp.459-468
• /
• 2012

This study surveyed and analyzed on the relationship between obesity and oral health in early child hood and on the oral health realities targeting 90 young children at K Child Care Center where is located in Gangwon-do Province from 10 to 11, June, 2011. As a result, DMF rate accounted for 56.7%. D rate accounted for 42.2%. The young children with the higher age, height in 100~110cm, and weight in 25 kg were indicated to be higher in DF rate than other toddlers. The young children with height in 110~115 cm were indicated to be higher in prevalence of dental caries in deciduous teeth than other young children. It was indicated that the young children in the higher age and weight leads to the higher in DFT index and DFS index. It was indicated that the young children in the more overweight leads to the higher in the index of dental caries in primary teeth, the filling deciduous teeth index, DFT index, DMFS, and DFS index. Accordingly, the child care center needs to systematically perform the oral health education and oral health management for young children, to allow Young children to acquire right food habit, and to pay close attention even to selecting snack.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.145-154
• /
• 2016

The purpose of this study was to carry out comparative analysis on the world major liner shipping companies' ship investment strategy using Fuzzy-AHP model. In this study, the ship investment factors were firstly selected by literature review and finally adopted them by in-depth interview with experts who had working experiences over 15 years in the field of shipping business. As suggested in the previous research, the liner shipping companies have been classified into four types such as 'ship investment irrelevant to market trend'(Type1), 'ship investment before market rise'(Type2), 'market decline after participation in excessive orders'(Type3), 'avoidance of ship investment during market rise'(Type4) and the comparative analysis were conducted among four ship investment types. According to the results of analysis, ship investment priority in Type1 was freight rates(0.132), price of used ship(0.121) and fleet(0.103). The priority in Type2 was freight rates(0.134), need for ship owner(0.113) and public funding(0.109). Type3 put its priority in freight rates(0.173), fleet(0.169) and the changes in international circumstances(0.121). Type4 considered freight rates(0.239), fleet(0.232) and oil price(0.150) as its priority.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.469-481
• /
• 2013

The purpose of this study was to describe working stress, child-rearing stress and parenting attitude of nurses who have preschool children. Methods: Data were collected by questionnaires from 136 nurses in three university hospital in 2011, and analyzed by the SPSS 12.0 program. Results: Nurses scored 3.48 points on average in working stress, 2.47 points in child-rearing stress, 3.61 points in parenting attitude. According to analysis on working stress depending on general demographic characteristics showed significant differences in workplace, monthly weekend duty frequency and in child-rearing stress depending on husband's age, wife's age, total income, marital period, satisfaction at relationship with husband, working career, number of children, and a person who cares for their children. According to parenting attitude depending on general demographic characteristics showed significant differences in working condition, marital period, position, working conditions, marital period, workplace, monthly weekend duty frequency. Correlations among nurses' working stress, child-rearing stress and parenting attitude, nurses' working stress had significantly correlations with parenting stress. Conclusion: Results of the study provides data on nursing interventions to relieve nurses from their working stress and child-rearing stress and to promote favorable child parenting attitude.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.159-170
• /
• 2019

This study is an online survey for consumers in the metropolitan areas of Japan and Korea, which are advanced countries in Asia, and the maturity of the automobile market. The purpose of this study is to compare the results of Korea and Japan. As a result of this study, we analyzed the differences between the consumer characteristics and the optional attribute factors of low-carbon automobiles of Korea. There was a difference. It was found that the factors of low carbon car selection attribute differed with age, and that stability was more important when selecting low carbon car as income level increased. In Japan, there were no differences in the selection attribute factors of low carbon cars by gender, age and income. In addition, there is no difference in the relationship between the future purchase timings of low-carbon car types in both Korea and Japan. Implications of this study Korea has a meaningful result that Korea tends to select low-carbon automobiles with an emphasis on economic aspects and ages, and that safety tends to emphasize safety of low-carbon automobiles according to income levels. In the case of low carbon car, there was a tendency to select a low carbon car without any difference in consumer characteristics. The relationship between the expected purchase time according to the type of low carbon car and the Korean car show that the preferred car within the next 10 years among the low carbon car types is electric car and Japan prefers hybrid car.