• Title/Summary/Keyword: [ph]

Search Result 1,898, Processing Time 0.028 seconds

The α-Effect in Nucleophilic Substitution Reactions of Y-Substituted-Phenyl X-Substituted-Cinnamates with Butane-2,3-dione Monoximate

  • Kim, Min-Young;Son, Yu-Jin;Um, Ik-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • v.34 no.10
    • /
    • pp.2877-2882
    • /
    • 2013
  • Second-order rate constants ($k_{Ox^-}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl X-substituted-cinnamates (7a-7e) and Y-substituted-phenyl cinnamates (8a-8e) with butane-2,3-dione monoximate ($Ox^-$) in 80 mol % $H_2O$/20 mol % DMSO at $25.0{\pm}0.1^{\circ}C$. The Hammett plot for the reactions of 7a-7e consists of two intersecting straight lines while the Yukawa-Tsuno plot exhibits an excellent linearity with ${\rho}_X$=0.85 and r=0.58, indicating that the nonlinear Hammett plot is not due to a change in the rate-determining step but is caused by resonance stabilization of the ground state (GS) of the substrate possessing an electron-donating group (EDG). The Br${\o}$nsted-type plot for the reactions of Y-substituted-phenyl cinnamates (8a-8e) is linear with ${\beta}_{lg}$ = -0.64, which is typical of reactions reported previously to proceed through a concerted mechanism. The ${\alpha}$-nucleophile ($Ox^-$) is more reactive than the reference normal-nucleophile ($4-ClPhO^-$). The magnitude of the ${\alpha}$-effect (i.e., the $k_{Ox^-}/k_{4-ClPhO^-}$ ratio) is independent of the electronic nature of the substituent X in the nonleaving group but increases linearly as the substituent Y in the leaving group becomes a weaker electron-withdrawing group (EWG). It has been concluded that the difference in solvation energy between $Ox^-$ and $4-ClPhO^-$ (i.e., GS effect) is not solely responsible for the ${\alpha}$-effect but stabilization of transition state (TS) through a cyclic TS structure contributes also to the Y-dependent ${\alpha}$-effect trend (i.e., TS effect).

Biphasic augmentation of alpha-adrenergic contraction by plumbagin in rat systemic arteries

  • Kim, Hae Jin;Yoo, Hae Young;Zhang, Yin Hua;Kim, Woo Kyung;Kim, Sung Joon
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.21 no.6
    • /
    • pp.687-694
    • /
    • 2017
  • Plumbagin, a hydroxy 1,4-naphthoquinone compound from plant metabolites, exhibits anticancer, antibacterial, and antifungal activities via modulating various signaling molecules. However, its effects on vascular functions are rarely studied except in pulmonary and coronary arteries where NADPH oxidase (NOX) inhibition was suggested as a mechanism. Here we investigate the effects of plumbagin on the contractility of skeletal artery (deep femoral artery, DFA), mesenteric artery (MA) and renal artery (RA) in rats. Although plumbagin alone had no effect on the isometric tone of DFA, $1{\mu}M$ phenylephrine (PhE)-induced partial contraction was largely augmented by plumbagin (${\Delta}T_{Plum}$, 125% of 80 mM KCl-induced contraction at $1{\mu}M$). With relatively higher concentrations (>$5{\mu}M$), plumbagin induced a transient contraction followed by tonic relaxation of DFA. Similar biphasic augmentation of the PhE-induced contraction was observed in MA and RA. VAS2870 and GKT137831, specific NOX4 inhibitors, neither mimicked nor inhibited ${\Delta}T_{Plum}$ in DFA. Also, pretreatment with tiron or catalase did not affect ${\Delta}T_{Plum}$ of DFA. Under the inhibition of PhE-contraction with L-type $Ca^{2+}$ channel blocker (nifedipine, $1{\mu}M$), plumbagin still induced tonic contraction, suggesting $Ca^{2+}$-sensitization mechanism of smooth muscle. Although ${\Delta}T_{Plum}$ was consistently observed under pretreatment with Rho A-kinase inhibitor (Y27632, $1{\mu}M$), a PKC inhibitor (GF 109203X, $10{\mu}M$) largely suppressed ${\Delta}T_{Plum}$. Taken together, it is suggested that plumbagin facilitates the PKC activation in the presence of vasoactive agonists in skeletal arteries. The biphasic contractile effects on the systemic arteries should be considered in the pharmacological studies of plumbagin and 1,4-naphthoquinones.

Marked Difference in Solvation Effects and Mechanism between Solvolyses of Substituted Acetylchloride with Alkyl Groups and with Aromatic Rigns in Aqueous Fluorinated Alcohol and in 2,2,2-Trifluoroethanol-Ethanol Solvent Systems

  • Oh, Yung-Hee;Jang, Gyeong-Gu;Lim, Gyi-Taek;Ryu, Zoon-Ha
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.8
    • /
    • pp.1089-1096
    • /
    • 2002
  • Solvolyses rate constants of trimethylacetyl chloride (2), isobutyryl chloride (3), diphenylacetyl chloride (4) and p-methoxyphenylacetyl chloride (5) in 2,2,2-trifluoroethanol (TFE)-water, 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-water and TFE-et hanol solvent systems at $10^{\circ}C$ are determined by a conductimetric method. Kinetic solvent isotope effects (KSIE) are reported from additional kinetic data for methanolyses of various substituted acetylchlorides in methanol According to the results of those reactions analyzed in terms of rate-rate profiles,extended Grunwald-Winstein type correlations, application of a third order reaction model based a general base catalyzed (GBC) and KSIE values. Regardless of the kind of neighboring groups (CH3- or Ph-groups) of reaction center, for aqueous fluorinated alcohol systems, solvolyses of 2, 3, 4, and 5 were exposed to the reaction with the same mechanism (a loose SN2 type mechanism by electrophilic solvation) controlled by a similarity of solvation of the transition sate (TS). Whereas, for TFE-ethanol solvent systems, the reactivity depended on whether substituted acetyl chloride have aromatic rings (Ph-) or alkyl groups (CH3-); the solvations by the predominant stoichiometric effect (third order reaction mechanism by GBC and/or by push-pull type) for Ph- groups (4 and 5) and the same solvation effects as those shown in TFE-water solvent systems for CH3- groups (2 and 3) were exhibited Such phenomena can be interpreted as having relevance to the inductive effect ( $\sigmaI)$ of substituted groups; the plot of log (KSIE) vs. ${\sigma}I$ parameter give an acceptable the linear correlation with r = 0.970 (slope = 0.44 $\pm$ 0.06, n = 5).

Nucleophilic Substitution Reactions of Phenyl Y-Substituted-Phenyl Carbonates with Butane-2,3-dione Monoximate and 4-Chlorophenoxide: Origin of the α-Effect

  • Kim, Min-Young;Min, Se-Won;Um, Ik-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • v.34 no.1
    • /
    • pp.49-53
    • /
    • 2013
  • Second-order rate constants have been measured spectrophotometrically for the reactions of phenyl Y-substituted-phenyl carbonates 7a-g with butane-2,3-dione monoximate ($Ox^-$) in 80 mol % $H_2O$/20 mol % DMSO at $25.0{\pm}0.1^{\circ}C$. The ${\alpha}$-nucleophile $Ox^-$ is 53-95 times more reactive than the corresponding normal-nucleophile 4-$ClPhO^-$ toward 7a-g, indicating that the ${\alpha}$-effect is operative. The magnitude of the ${\alpha}$-effect (e.g., the $k_{Ox^-}/k_{4-ClPhO^-}$ ratio) is independent of the electronic nature of the substituent Y. The cause of the ${\alpha}$-effect for the reactions of 7a-g has been suggested to be ground-state (GS) effect rather than transition-state (TS) stabilization through a six-membered cyclic TS, in which $Ox^-$ behaves a general acid/base catalyst. This idea is further supported by the result that $OH^-$ exhibits negative deviation from the linear Br${\o}$nsted-type plot composed of a series of aryloxides, while $Ox^-$ deviates positively from the linearity. Differential solvation of the GS of $Ox^-$ and 4-$ClPhO^-$ has been suggested to be responsible for the ${\alpha}$-effect exerted by $Ox^-$.

High Performance Liquid Chromatographic Analysis of a New Proton Pump Inhibitor KR60436 and Its Active Metabolite O-Demethyl-KR60436 in Rat Plasma Samples Using Column-Switching

  • Lee, Hyun-Mee;Lee, Hee-Yong;Choi, Joong-Kwon;Lee, Hye-Suk
    • Archives of Pharmacal Research
    • /
    • v.24 no.3
    • /
    • pp.207-210
    • /
    • 2001
  • A fully automated high performance liquid chromatography with column-switching was developed for the simultaneous determination of KR60436, a new reversible proton pump inhibitor, and its active metabolite O-Demethyl-KR60436 from rat plasma samples. Plasma sample (50$\mu$l) was directly introduced onto a Capcell Pak MF Ph-1 column ($10{\times}4$ mm I.D.) where primary separation was occurred to remove proteins and concentrate target Substances Using acetonitrile-Potassium Phosphate (PH 7, 0.1 M) (2 : 8, v/v). The drug molecules eluted from MF Ph-1 column were focused in an intermediate column ($10{\times}2$ I.D.) by the valve switching step. The substances enriched in intermediate column were eluted and separated on a Vydac 218MR53 column ($250{\times}3.2$ I.D.) using acetonitrilepotassium phosphate (pH 7, 0.02 M) (47:53, v/v) at a flow rate of 0.5 ml/min when the valve status was switched back to A position. The method showed excellent sensitivity (detection limit of 2 ng/ml) with small volume of samples ($50{\mu}$l), good precision and accuracy, and speed (total analysis time 24 min) without any loss in chromatographic efficiency. The response was linear ($r^2{\geq}0.797$) over the concentration range of 5-500 ng/ml.

  • PDF

A Study of New water-soluble 3-D Binders on Water Washability by PH and the Debossing effect to property of Blowing Agents for Polyester fabrics (폴리에스테르 섬유용 수용성 입체가공 바인더의 PH에 따른 수세성과 발포제 양에 따른 디보싱 효과에 대한 고찰)

  • Kim, Moon-Jeong;Kim, Jong-Hoon;Kim, In-Tae;Lee, Ki-Jung;Chul, Dae-Sik;Lee, Hee-Jun;Hwang, Tea-Yeon
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2011.11a
    • /
    • pp.50-50
    • /
    • 2011
  • 국내 섬유산업은 해외로부터의 저가 섬유제품이 대량으로 유입되는 속에서도 수출의 상당한 부분을 차지하며, 꾸준히 양에서 질로의 전환을 도모해 왔으며, 특히 최근에는 섬유 전반에 걸쳐 고부가 가치화를 지향하고 있다. 이러한 소비자의 요구에 부응하여 섬유소재에도 다양한 신개념과 이를 충족시킬 수 있는 기술이 요구되고 있으며, 그 가운데 하나의 영역을 구축해 나가고 있는 분야가 면 리플가공과 같은 표면 형태 가공이며, 최근 들어 폴리에스테르 입체(3D)가공제의 개발 및 가공 방법도 이런 흐름에 부응하여 업계에서 절실한 개발을 요구하고 있는 분야이다. 기존의 폴리에스테르 및 합성섬유의 입체 가공에 적용된 화학제품보다 성능은 우수하면서, 가공 공정이나 완성된 섬유제품에 전혀 잔존하지 않아 인체친화적(기존의 제품들은 인체에 유해한 재료이면서 가공 후 잔존함)이며, 환경적인 측면에서도 친환경을 유지하면서 새로운 폴리에스테르섬유, 좀 더 폭넓게는 열가소성인 모든 합성섬유의 입체가공이 가능한 약품의 개발 및 이를 이용한 가공방법의 개발은 매우 중요한 의의를 가지게 된다. 본 연구에서는 폴리에스테르의 3D입체 디보싱을 부여하는 합성바인더가 물에 의한 용해도를 확인하기 위하여 용액의 PH에 따른 용해성 시험을 진행하였으며, 합성한 발포제의 양에 따른 3D입체형성 정도를 이미지로 형상화 하였다.

  • PDF

A novel method with photochemical reaction for LK immobilization on the polyurethane surface (폴리우레탄 표면의 광화학적 공유결합을 이용한 새로운 LK 고정화 방법에 관한 연구)

  • Kim, H.J.;Nakayama, Yasuhide;Shim, J.H.;Ryu, G.H.;Kim, J.;Matsuda, Takehisa;Min, B.G.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1996 no.05
    • /
    • pp.91-96
    • /
    • 1996
  • 광반응을 이용하여 fibrinolytic 활성을 보이는 LK (lumbrokinase)를 생체재료인 PU (polyurethane) 표면에 고정화하는 방법에 관하여 연구하였다. 먼저 PU표면에 amino 작용기를 도입하기 위하여 side chain 작용기로 phenylazide 와 amino작용기를 갖는 AzPhPAL을 이용하였으며 광반응은 266nm 이상의 UV light을 약 1분간 조사시키는 방법을 이용하였다. LK를 amino작용기가 유도된 PU 표면에 공유결합시키기 위하여 amide결합 형성시 사용되는 수용성 carbodiimide인 EDC를 이용하였다. ESCA측정시, AzPhPAL으로 공유결합시킨 경우 반응하지 않은 PU표면에 비하여 N/C가 0.1717로, LK 고정시 S/C가 0.0043로 증가된것을 알 수 있었다. 이것으로부터 AzPhPAL과 LK가 PU표면에 공유결합된 것을 확인할 수 있었으며 static contact angle 측정으로 표면개질된 PU표면이 소수성에서 친수성으로 변화된 것을 확인 할 수 있었다. 또한 공유결합된 LK의 활성을 확인하기 위하여 fibrin plate test를 실시하였는데 그 결과 고정화된 후에도 LK의 활성이 존재함을 알 수 있었다.

  • PDF

A Study on the Physical Characteristics of III-V Compound Boron Phosphide using CVD (CVD를 이용해 증착한 III-V 화합물 보론 포스파이드의 물성분석에 관한 연구)

  • Hong, Kuen-Kee;Kim, Chul-Ju
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.07a
    • /
    • pp.332-335
    • /
    • 2004
  • Boron Phosphide films were deposited on(III) Si substrate at $650^{\circ}C$, by the reaction of $B_2H_6$ with $PH_3$ using CVD. $N_2$ was employed as carrier gas. The optimal gas rates were 20 ml/min for $B_2H_6$, 60 ml/min for $PH_3$ ml/min and $1{\ell}/min$ for $N_2$. The films were annealed for 1hour in $N_2$ ambient at $550^{\circ}C$ and measured. The measurement of AFM shows that the average surface roughness is each $10.108{\AA}$ and $29.626{\AA}$. So, we could know every commonplace thing. The measurement of XRD shows that the films have the preferred orientation of(1 0 1). From SEM images, we could see that Boron Phosphide is showed of a structure, which is grain size, which is grain boundary size. Also, the measurement of AES is shown the films have $B_{13}P_2$ Stoichiometry. From WDX See that ingredient is detected each Boron and Phosporus. So, we could see that deposited BP thin film. In this study, we obtained the BP thin film by deposited in atmosphere pressure, and known to applicate as microwave absorbtion material of BP thin film.

  • PDF

COMPARISON OF THE PHYSICAL PROPERTIES BETWEEN GALLIUM ALLOY AND HIGH COPPER AMALGAM ALLOYS (갈륨합금과 고동 아말감 합금의 물리적 성질 비교)

  • Kim, Hyeon-Cheol;Lee, Hee-Joo;Hur, Bock
    • Restorative Dentistry and Endodontics
    • /
    • v.23 no.1
    • /
    • pp.278-287
    • /
    • 1998
  • The purpose of this study was to compare the physical properties between high copper amalgam and gallium restorative material. In this study, the specimens for the 4 experimatal groups (Valiant, Valiant PhD, Gallium Alloy GF II. Gallium Alloy GF II triturated with some addition of alcohol) were prepared in the manner of which stated in ADA specification No.1 for amalgam alloy. And then, measured and compared the value of compressive strength. creep, and dimensional change during hardening of each sample. The results were as follows: 1. In the compressive strength, the Valiant-lathe cut type high copper amalgam-had the highest value of strength(p<0.05), and the Valiant PhD-admixed type high copper amalgam-showed the higher value of strength than the Gallium Alloy GF II(p<0.05) but had no significant difference with Gallium Alloy GF II triturated with some addition of alcohol(p>0.05). 2. In the creep. the Valiant PhD showed the highest value of creep (p<0.05), but there was no significant difference between Gallium Alloy GF II and Valiant(p>0.05). 3. In the dimensional change during hardening, no two groups were significantly different at the 0.050 level. 4. There was no significant difference between Gallium Alloy GF II and the same material which was triturated with some addition of alcohol(p>0.05).

  • PDF

Transmission of Substituent Effects through 5-Membered Heteroaromatic Rings

  • Lee, Ik Hun;Ri, Sun Gi;Kim, Chang Gon;Jeong, Dong Su;Kim, Chan Gyeong
    • Bulletin of the Korean Chemical Society
    • /
    • v.21 no.9
    • /
    • pp.882-890
    • /
    • 2000
  • Ab initio calculations are carried out on protonation equilibria of 5-memberedheteroaromatic aldehydes (5MHAs;heteroatom Y = NH, O, PH,and S and substituentZ = NH2, OCH3, SCH3, CH3, H, Cl, CHO, CN,NO2) at the $MP2}6-31G*$ level. Naturalbond orbital (NBO) analyses show that the optimal localized natural Lewis structures of the protonated aldehydes,(P), are ortho (C3) protonated (for Y = O, PH and S) and N-pro-tonated (for Y = NH) forms in contrast to the standard structural Lewis formula for aldehydes, (R). The delo-calizability of ${\pilone}-pairon$ the heteroatom $(n{\pi}(Y))$ is in the order Y = NH > O > S > PH. The transmission efficiency of (Z) substituent effects to the carbonyl moiety run parallel to the delocalizability of $n{\pi}(Y)$ for R,but is dominantly influenced by the cationic charge on $C{\alpha}(C{\alpha}+)$ for P, which is in the reverse order of thede-localizability of $n{\pi}(Y).$ The Hammett ${\rho}values$ for variation of Z in the protonation are determined by the dif-ference in the transmission efficiencies between Pand R stateat simple interpretation of their magnitude is not warranted. However,the magnitude of the gas-phase ${\rho}z+$ values decreases as the level ofcomputation is raised from RHF/3-21G* to RHF/6-31G* and to $MP2}6-31G*$ but increases again at the MP4SDQ/6-31G* level. Further decrease occurs when solvent effect (water) is accounted for by the SCRF method. Comparison of the SCRF ${\rho}z+values$ with those determined in the aqueous acid solution for Y = S and CHCH shows inadequacy of accounting for the solvent effects on the ${\rho}values$ by a continuum model. It is noteworthy that semiempirical calculations, especially theAM1 method, give even lower magnitude of the gas-phase ${\rho}values.