• The korean journal of orthodontics
• /
• 제45권2호
• /
• pp.82-88
• /
• 2015

Objective: The aim of this study was to evaluate the reliability of measurements obtained after the superimposition of three-dimensional (3D) digital models by comparing them with those obtained from lateral cephalometric radiographs and photocopies of plaster models for the evaluation of upper molar distalization. Methods: Data were collected from plaster models and lateral cephalometric radiographs of 20 Class II patients whose maxillary first molars were distalized with an intraoral distalizer. The posterior movements of the maxillary first molars were evaluated using lateral cephalometric radiographs (group CP), photocopies of plaster models (group PH), and digitized 3D models (group TD). Additionally, distalization and expansion of the other teeth and the degrees of molar rotation were measured in group PH and group TD and compared between the two groups. Results: No significant difference was observed regarding the amount of molar distalization among the three groups. A comparison of the aforementioned parameters between group PH and group TD did not reveal any significant difference. Conclusions: 3D digital models are reliable to assess the results of upper molar distalization and can be considered a valid alternative to conventional measurement methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.747-750
• /
• 2007

This study proposes that chlorine residue after metal etch as the source of metal corrosion, and charges should be removed by optimizing etch, PR strip and cleaning condition. Charges distributed along the metal line acts as a source of tungsten (W) plug corrosion when associated with following cleaning solution. In cleaning process after metal etch and PR strip, chemical selection is significantly important in terms of metal corrosion. Optimal corrosion preventive PH, no metal attack (choice of optimal inhibitants), high by product removal efficiency and optimal de ionized water treatment condition is critical to the metal corrosion prevention.

• Korean Journal of Materials Research
• /
• 제2권2호
• /
• pp.133-142
• /
• 1992

The slow strain-rate test($1{\times}10^{-4}~1{\times}10^{-7}sec^{-1}$) was performed to understand the tensile properties of chopped strand glass mat/polyester composite in air and synthetic sea water. (pH 6.0, 8.2, 10.0) For the tested composite subjected to tensile loading in air and synthetic sea water (ph 6.0, 8.2, 10.0), the tensile properties are a little decreased as strain rate decrease and a little decrease in stiffness is observed in $1{\times}10^{-7}sec^{-1}$. The tensile properties were some changed in case the pH value in synthetic sea water is varied.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.524-529
• /
• 2006

New, thermally robust, arylenevinylene conjugated polymers, including poly(9,9-dioctylfluorenyl-2,7-vinylene) [poly(FV)] and poly[2-(3'-dimethyldodecylsilylphenyl)-1,4-phenylenevinylene] [poly(m-SiPhPV)], were synthesized and used for the fabrication of efficient photovoltaic cells. Bulk heterojunction photovoltaic cells fabricated by blending one of the polymers, [poly(FV)], [poly(m-SiPhPV)], and poly(FV-co-m-SiPhPV), with the fullerene derivative [6,6]-phenyl-$C_{61}$-butyric acid methyl ester (PCBM) were found to have a power conversion efficiency of up to 0.038%..

• Archives of Pharmacal Research
• /
• 제6권2호
• /
• pp.123-131
• /
• 1983

Polysaccharide fractions were prepared from Ginseng root, Mori Radicis Cortex (M. R. C. ), Phellodendri Cortex (Ph. C. ), Sappan Wood (S. W. ) and Tigli Semen (T. S.). Water extract was also prepared from the mixture of ph. C., S. W. and T. S. Ginseng polysaccharide and water extract of the mixture showed marked antitumor activity against sarcoma 180. Ginseng polysaccharide showed a mild increasing effect on the number of circulating leucocytes and a marked increasing effect on the number leucocytes and a marked increasing effect on the number of plaque forming cells (PEC). Polysaccharides from ginsing root, S. W., Ph. C. + T. S. and water extract of the mixture showed dramatic inducing activities of periotoneal exudate cells (PEC), polymorphonuclear leucocytes (PMN) and macrophages. These results suggest the possibility that water extract of the mixture may have the lentinan like effect and ginseng polysaccharide may have stimulating effects on the general immune system.

• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• 제8집
• /
• pp.1-23
• /
• 2003

Im Deutschen wird generell einem Suffix zwei verschiedene prosodische Strukturen zugewiesen: ein konsonanteninitiales Suffix bildet sein eigenes phonologisches Wort, ein vokalinitiales Suffix dagegen nicht. $F\"{u}r$ diese Unterscheidung zwischen zwei Suffixklassen nennt man innerhalb einer regelbasierten Theorie zwei Kriterien: (i) Phonologisches Wort fungiert als $Dom\"{a}ne{\;}f\"{u}r$ die Silbifizierung und die Koordinationsreduktion, (ii) Konsonanteninitiale Suffixe $tr\"{a}gen$ einen Nebenakzent, $w\"{a}hrend$ einem vokalinitialen Suffix kein Akzent zugewiesen wird. Diese Arbeit zeigt, dass das erste Kriterium kein Argument $f\"{u}r$ die Annahme eines phonologischen Wortes ist. Die Existenz eines phonologischen Wortes und die Unterscheidung zwischen zwei Suffixklassen hinsichtlich des prosodischen Status werden durch einen Zirkelschluss $begr\"{u}ndet$, indem die Annahme eines phonologischen Wortes $Ph\"{a}nomene$ wie Silbifizierung und Koordinationsreduktion rechtfertigt, diese $Ph\'{a}nomene$ wiederum ihrerseits die Annahme eines phonologischen Wortes. Die hier vorgeschlagene Constraintsinteraktion erfasst dagegen den wesentlichen Charakter der beiden $Ph\"{a}nomene$, ohne dabei einen direkten Bezug auf das phonologische Wort zu nehrnen. Auch im Zusammenhang mit dem zweiten Kriterium stellt sich heraus, dass es keinen Grund gibt, Akzentunterschiede bei Suffixen anzunehmen. Die Allomorphie der Superlativ-Suffixe +est/+st ergibt sich aus dem Constraintranking OCP$\gg$ $fu{\ss}bezogene$ Constraints, nicht aus dem Akzentunterschied zwischen Suffixen.

• YAKHAK HOEJI
• /
• 제55권5호
• /
• pp.391-397
• /
• 2011

KML001 reduced the proliferation of HCT116 cells in a concentration- and time-dependent manner without change of cell viability. Beclin-1 expression was significantly attenuated by KML001 (P<0.05), but no significant changes were observed in KML001-treated cells. The number of cells in G1 phase was increased 48 hr after KML001 treatment. Furthermore, a dramatic reduction in the frequency of beating and the number of embryoid bodies of the cells was noted after treatment. Taken together, KML001 suppresses the proliferation of HCT116 cells, which might be due to G1 phase arrest.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2009년도 춘계학술대회 논문집
• /
• pp.280-285
• /
• 2009

1998년 8월부터 2005년 6월까지 한반도 주변 해역에서 현장관측한 해수의 고유 광특성(IOPs)과 외형적 광특성(AOPs) 자료들을 이용하여 원격반사도$(R_{rs}(\lambda))$와 성분별 흡광계수의 총 합 $(\alpha(\lambda)=\alpha_w(\lambda)+\alpha_{ph}(\lambda)+\alpha_{ss}(\lambda)+\alpha_{dom}(\lambda))$의 상관관계를 분석하고, $R_{rs}(\lambda)$ 밴드비를 이용하여 흡광계수 산출 알고리즘을 개발하였다. 파장에 따른 $R_{rs}(\lambda)$와 총합 $\alpha(\lambda)$의 상관관계는 반비례적인 관계를 보였고, 파장 443 nm일 때 상관도$(R^2)$는 0.717이다. $\alpha_{ph}(\lambda)$ 산출알고리즘은 엽록소의 흡광과 관련된 파장 490 nm와 부유물의 산란과 관련된 파장 555 nm의 $R_{rs}(\lambda)$ 밴드비의 함수 형태로 구성하였고, 파장 443 nm일 때 RMS 값은 0.223이다. $\alpha_{ss}(\lambda)$과 $\alpha_{dom}(\lambda)$ 산출 알고리즘은 용존유기물의 흡광과 관련된 파장 412 nm와 부유물의 산란과 관련된 파장 555 nm의 $R_{rs}(\lambda)$ 밴드비의 함수 형태로 구성하였고, 파장 412 nm일 때 RMS 값은 각각 0.324와 0.230이다. $\alpha_{ph}(\lambda),\;\alpha_{ss}(\lambda),\;\alpha_{dom}(\lambda)$ 산출 알고리즘들은 대체적으로 현장값보다 높게 추정하였고 스펙트럼들은 잘 재현해냈다. 추후 이에 대한 개선과 알고리즘의 검보정이 요구된다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 한국분말야금학회 2003년도 춘계학술강연 및 발표대회
• /
• pp.23-23
• /
• 2003

분말야금된 소결체의 가장 큰 특징 중의 하나는 피할 수 없는 소결체의 기공이다. 이러한 기공이 기계적 특성에 미치는 영향에 관해서는 많은 연구가 오래 전부터 진행되었었다. 그러나 기존의 연구는 거의 대부분 일반 분말야금에 의한 것이고 분말사출성형된 소결체의 기공율과 기계적 특성 광계는 거의 연구가 이루어 지지 않았다. 본 연구에서는 기공율의 조절이 용이한 분말사출성형 공정을 이용하여 소결 초기부터 완전 치밀화에 가까운 조직까지 다양한 소경율의 시편을 만들어 기계적 특성에 미치는 순수기공의 영향은 조사하기 위해 다음과 같이 조사하고자 하였다. 사출성형에 사용된 재료는 고강도 이며 내식성이 뛰어난 17-4 PH STS이고 평균 입경은 10mm였다. 열분해와 소결은 수소 분위기에서 행하였으며 소결온도는 900~$1350^{\circ}C$였다. 연구수행을 통해 다음과 같은 결론을 얻었다. 1. 기공율과 기계적 특성의 관계는 닫힌 기공이 지배하는 고밀도 영역과 열린 기공이 지배하는 저밀도 영역을 분리하여 해석해야한다. 2. 저밀도 영역에서의 기공율과 강도의 관계는 넥 성장에 따른 load bearing area의 증가로 나타낼 수 있고 아래와 같다. $\frac{\delta}{\delta_o}=1-\frac{P}{P_i}$ 3. 고밀도 영역에서의 기공율과 강도의 관계는 소결 현상과 초기 충진율을 고려한 ideal pore모델을 도입하였고 아래와 같이 나타났다. $\frac{\delta}{\delta_o}=1-1.95(P_i\;{\cdot}\;P)^{2/3}$

• Journal of Crop Science and Biotechnology
• /
• 제11권3호
• /
• pp.171-176
• /
• 2008

The agronomic traits, such as days to flowering and maturity, plant height, 100-seed weight and seed filling period, are quantitatively inherited and important characters in soybean(Glycine max L. Merr.). A total of 126 $F_5$ recombinant inbred lines(RILs) developed from the cross of PI 171451$\times$Hwaeomputkong were used to identify quantitative trait loci(QTLs) for days to flowering(FD), days to maturity(MD), plant height(PH), 100-seed weight(SW), number of branches(NB) and seed filling period(FP). A total of 136 simple sequence repeat(SSR) markers segregated in a RIL population were distributed over 20 linkage groups(LGs), covering 1073.9 cM of the soybean genome with the average distance between adjacent markers of 7.9 cM. Five independent QTLs were identified for FD, three for MD, two for PH, three for SW, one for NB and one for FP. Of these, three QTLs were related to more than two traits of FD, MD, PH, NB and FP and mapped near the same positions on LGs H and O. Thus, these traits could be correlated with biologically controlled major QTLs in this soybean RIL population.