• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.05a
• /
• pp.280-281
• /
• 2006

속초연안의 수온은 18개년 평균 표층수 $14.10\pm0.34^{\circ}C$, 저층수 $12.56\pm0.28^{\circ}C$, 염분은 표층수 $31.66\pm0.18$, 저층수 $32.68\pm0.10$, pH은 표층수 $8.05\pm0.01$, 저층수 $8.02\pm0.01$, BO는 표층수 $8.48\pm0.11mg/L$, 저층수 $8.16\pm0.12mg/L$, COD는 표층수 $1.54\pm0.07mg/L$, 저층수 $1.33\pm0.06mg/L$, SS는 표층수 $13.75\pm0.80mg/L$, $PO_4$-P는 표층수 $0.74\pm0.05{\mu}M$, 저층수 $0.61\pm0.04{\mu}M$, $NH_4$-N는 표층수 $2.49\pm0.18{\mu}M$, 저층수 $2.01\pm0.15{\mu}M$, $NO_2$-N는 표층수 $0.72\pm0.05{\mu}M$, 저층수 $0.58\pm0.04{\mu}M$, $NO_3$-N는 표층수 $4.39\pm0.24{\mu}M$, 저층수 $3.63\pm0.20{\mu}M$, DIN는 표층수 $7.64\pm0.38{\mu}M$, 저층수 $6.22\pm0.29{\mu}M$, DIN/DIP비 표층수 $23.91\pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.758-766
• /
• 2015

Dextran is a generic term for a bacterial exopolysaccharide synthesized from sucrose and composed of chains of D-glucose units connected by ${\alpha}$-1,6-linkages by using dextransucrases. Dextran could be used as vicosifying, stabilizing, emulsifying, gelling, bulking, dietary fiber, prebiotics, and water holding agents. We isolated new strain capable of producing dextran from Korean traditional kimchi and identified as Leuconostoc sp. strain JYY4. Batch fermentation was conducted in bioreactor with a working volume of 3 L. The media was MMY and 15% (w/v) sucrose. Mineral medium consisted of $3.0g\;KH_2PO_4$, $0.01g\;FeSO_4$, $H_2O$, $0.01g\;MnSO_4$, $4H_2O$, $0.2g\;MgSO_4\;7H_2O$, 0.01 g NaCl, $0.05g\;CaCl_2$ per 1 liter deionized water. The pH of media was initially adjusted to 6.0. The inoculation rate was 1.0% (v/v) of the working volume. Temperature was maintained at $28^{\circ}C$. The agitation rate was 100 rpm. The production pattern of dextran was associated with the cell growth. After 24 hr dextran reached its highest concentration of 59.4 g/L. The sucrose was consumed completely after 40 hr. Growth reached stationery phase when sucrose became limiting, regardless of the presence of fructose or mannitol. When the specific growth rate was 0.54 hr-1, utilization averaged 5.8 g/L-hr. The yield and productivity of dextran were 80% and 2.0 g/L-hr, respectively. Dextrans produced by were separated to two different size by an alcohol fraction method. The size of high molecular weight dextran (45% alcohol, v/v), less soluble dextran, was between MW 500,000 and 2,000,000. Soluble dextran (55% alcohol, v/v) was between 70,000 and 150,000. The molecular weight average of total dextran (70% alcohol, v/v) was between 150,000 to 500,000. The enzymatic hydrolyzates of total dextran of ATCC 13146 showed branched dextrans by Penicillium dextranase contained of glucose, isomaltose, isomaltotriose, and isomaltooligosaccharides greater than DP4 (degree of polymerization) that had branch points. Compounds greater than DP4 were branched isomaltooligosaacharides. Hydrolysates by the Lipomyces dextranase produced the same composition of oligosaccharides as those by Penicillin dextranase.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.484-492
• /
• 2014

We quantified the effects of the composition and concentration of fertilizer solutions on the growth and nutrient uptake of 'Maehyang' strawberry at the vegetative growth stage. Acid fertilizer (AF), neutral fertilizer (NF), and basic fertilizer (BF) with concentrations of 100 or $200mg{\cdot}L^{-1}$ based on N, were formulated and applied during the 100 days after transplanting, at which point crop growth and tissue nutrient contents were analyzed. The soil solutions were sampled every two weeks to measure the pH, EC and nutrient concentrations. BF was a more effective fertilizer compared to AF and NF for growth of 'Maehyang' strawberry when fertilizer concentrations were controlled to $100mg{\cdot}L^{-1}$. By contrast, the fresh and dry weights were greatest in the NF treatment when fertilizer concentrations were controlled to $200mg{\cdot}L^{-1}$. The tissue contents of N, P, and Na were 2.20, 0.51 and 0.10%, respectively, in the NF 200 treatment, and these were the highest among all treatments tested. The highest contents of K, Ca and Mg were 2.60% in AF 200, 0.95% in BF 200 and 0.45% in BF 100, respectively. During the fertilization period, the highest and lowest pHs were 6.13 in BF 100 and 4.92 in AF 200. The lowest EC was $1.376dS{\cdot}m^{-1}$ in BF 100 and the highest was $4.936dS{\cdot}m^{-1}$ in NF 200 treatments. The highest $NH_4{^+}$ concentrations in the soil solution occurred during the AF 200 treatment, followed by those with NF 200 and AF 100. When fertilizer concentrations were equal, AF treatment gave rise to the highest $Ca^{+2}$ and $Mg^{+2}$ concentrations, followed by NF and BF, until day 84 of fertilization. The BF treatments had the highest $NO_3{^-}$ concentrations followed by NF and AF. The trends for $PO_4^{-3}$ concentrations were similar in all fertilizer treatments when the fertilizer concentrations were equal. The above results indicate that neutral and basic fertilizers were most effective to promote 'Maehyang' strawberry growth when fertilizer solutions were controlled to low or high concentrations, respectively. These findings are useful for planning fertilization programs for vegetative propagation of 'Maehyang' strawberry.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.25-30
• /
• 2000

Phytoestrogen has been used as a suppliment of estrogen in order to treat osteoporosis. The representative phytoestrogens, isoflavones, are daidzein, genistein and formononetin which were present highly in our traditional soybean foods. The quantitative analysis of the isoflavone was done with a high performance liquid chromatography(HPLC) using a UV/VIS detector for the contents of the isoflavones in Astragali Radix, soybean sprouts, bean-curd(Tofu), soybean, soybean oil, pea, kidney pea, black bean(Yak-kong), soybean sauce(Ganjang). soybean paste(Doenjang), and fermented soybean(Maejoo). The content of free daidzein in soybean sprouts was $43.49{\pm}3.41\;mg/kg$$ which was much higher than that in soybean, $14.52{\pm}0.58\;mg/kg$, although total daidzein of fermented soybean was lower than that in soybean (Table 2. P<0.01). The amounts of free genistein in soybean sprouts, fermented soybean. and soybean paste were $27.63{\pm}1.66\;mg/kg,\;291.52{\pm}6.81\;mg/kg,\;and\;18.75{\pm}1.33\;mg/kg$, respectively. The level of free formononetin in soybean paste was the highest among the soybean products (P<0.01). The content of formononetin in Aatragali Radix, $9629.73{\pm}0.57\;{\mu}g/kg$, was about 160 times higher than that in soybean. Thus Korean traditional soybean products, black bean(Yak-Kong) and Astragali Radix can be a good choice of phytoestrogens.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2004

Cordyceps pruinosa grows upon dead pupae of Lepidoptera and produces one or $3{\sim}4$ club-shaped stromata per host. The stromata have distinct club-shaped head and long stalk. The length of stromata varies from $1{\sim}3\;cm$. Apical head consists of densely crowded semi-immersed perithecia, which are $360{\sim}400\;{\times}\;180{\sim}200\;{\mu}m$ in size. Asci are $150\;{\mu}m$ in length and $2.8{\sim}3\;{\mu}m$ in diameter. Ascospores, which are $124{\sim}141\;{\mu}m$ in length, have thin thread-like structures in the middle with part-spores attached on both sides. Each ascospore does not separate into part-spores after dispersal, but each part-spore germinates and together develops a colony. The imperfect form produces phialides of $15{\sim}24\;{\times}\;2{\sim}3\;{\mu}m$ size, with spherical or spindle shaped conidia of $4{\sim}6\;{\times}\;1.8{\sim}2.4\;{\mu}m$ size, The anamorph was identified as Mariannaea elegans Samson. YMA and SDAY agar media with pH 7 was produced abundant mycelial growth with high density. Best mycelial growth was observed when dextrin was used as a carbon source. Lactose, saccharose and sucrose also produced high mycelial growth. Peptone, yeast extract and tryptone produced abundant mycelial growth, when used as nitrogen sources. Highest mycelial growth and density was observed when C/N ratio was 1 : 1 at the concentration of 12.5 g/l each. $KH_2PO_4$ was the best mineral source for mycelial growth. Highest mycelial dry wt. was produced in YM and SDAY broths. Optimum inoculum for 100 ml of liquid broth was 6 mycelial discs. Similarly, optimum liquid culture period was 7 days.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.508-526
• /
• 1995

This experiment was performed to study mechanisms of desensitization by chemical desensitizing agents in hypersensitive dentin and compare effects of these agents by measuring the activity of intradental nerves and observing their occluding aspects on dentinal tubules with SEM over time after application of chemical desensitizing agents to the exposed dentinal surfaces. Canines of adult cats weighing 2-3 kg were cross-sectioned at 1.5 mm from incisal apex, and the smear layer of the exposed dentinal susface was removed by 32 % $H_3PO_4$ for 15 sec. Chemical desensitizing agents such as 10% $SrCl_2$, 5% $KNO_3$ and 30% $K_2C_2O_4$, were applied to the exposed dentin surfaces for 2 minutes. Intradental nerve activity was measured immediately after application of the agents, at 15 minutes and at 30 minutes by stimulating with 4M NaCl. To compare occluding ability of desensitizing agents on dentinal tubules in vivo and in vitro, the structures of the exposed dentinal surfaces of nonvital and vital teeth were morphologically observed by SEM. The results obtained were as follows : 1. Intradental nerve activity was decreased immediately after the application of 10 % $SrCl_2$, 5% $KNO_3$ and 30% $K_2C_2O_4$. (p<0.01), among which 30% $K_2C_2O_4$. showed the highest desensitizing effect(p<0.01). 2. The immediately decreased intradental nerve activity after application of 10 % $SrCl_2$ and 5% $KNO_3$ was increased over time. 10% $SrCl_2$ and 5% $KNO_3$ showed no desensitizing effect respectively at 30 minutes and at 15 minutes after application. 3. The immediately decreased intradental nerve activity after application of 30 % $K_2C_2O_4$ was persistently continued during the period of observation (p<0.01). 4. Precipitates of $SrCl_2$ and $KNO_3$ were not noted on the exposed dentinal surfaces and within dentinal tubules by SEM examination. On the other hand, 30 % $K_2C_2O_4$ produced precipitates on the exposed dentinal surfaces and openings of dentinal tubules without any formed preciptates within dentinal tubules. 5. Ten percent $SrCl_2$, 5 % $KNO_3$ and 30 % $K_2C_2O_4$ showed no differences in their occluding aspects on dentinal tubules either in vivo or in vitro studies and either immediately following application or at 30 minutes. These results suggest that the desensitizing effect of $SrCl_2$ and $KNO_3$ is resulted from their reducing effect on the intradental nerve activity rather than from their precipitates' occluding the dentinal tubules. However, desensitizing effect of 30 % $K_2C_2O_4$, is probably resulted from its precipitates' occluding the openings of the dentinal tubules as well as from it's reducing effect on the intradental nerve actibity.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2009

Nowadays, Tra catfish fat is given attention as an appropriate material for biodiesel production in Vietnam. The aim of this work is to investigate the optimal conditions of refining biodiesel and recovering glycerin by the transesterification from Tra catfish fat using KOH catalyst. As our results, the yield of transesterification was achieved to 94.17% at $50^{\circ}C$ for 45 min with 6:1 molar ratio of methanol to fat in the presence of 0.8% KOH catalyst, and wherein the biodiesel was refined by washing with distilled water at $70^{\circ}C$ and dried in a microwave oven. The yield of raw glycerin recoveries from the transesterification process was 78.58%. The purity of raw glycerin was 84.14% by the conditions of neutralization state with $H_{3}PO_{4}$ solution (pH = 5), $70^{\circ}C$, and 60 min. Activated carbon (3.0 wt.%) was used for the bleaching process at $80^{\circ}C$ for 20 min. The biodiesel was obtained in accordance with for ASTM D 6751 (biodiesel standard). The ash and water of raw glycerins were 7.32 and 8.01%, respectively, and implied that the raw glycerin is very promising candidate to be used as a raw material for textile and cosmetic industries.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.895-902
• /
• 2014

Bacterial cellulose (BC) has played important role as new functional material for food industry and industrial products based on its unique properties. The interest in BC from static cultures has increased steadily in recent years because of its potential for use in medicine and cosmetics. In this study, we investigated culture condition for BC production by Acetobacter sp. F15 in static culture. The strain F15, which was isolated from decayed fruit, was selected on the basis of BC thickness. The optimal medium compositions for BC production were glucose 7%, soytone 12%, $K_2HPO_4$ 0.2%, $NaH_2PO_4{\cdot}_2H_2O$ 0.2%, lactic acid 0.05% and ethanol 0.3%, respectively. The strain F15 was able to produce BC at $26^{\circ}C-36^{\circ}C$ with a maximum at $32^{\circ}C$. BC production occurred at pH 4.5-8 with a maximum at pH 6.5. Under these conditions, a maximum BC thickness of 12.15 mm was achieved after 9 days of cultivation; this value was about 2.3-fold higher than the thickness in basic medium. Scanning electron micrographs showed that BC from the optimal medium was more compact than plant cellulose and was reticulated structure consisting of ultrafine cellulose fibrils. BC from the optimal medium was found to be of cellulose type I, the same as typical native cellulose.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.129-150
• /
• 2006

Mineral potential mapping is an important procedure in mineral resource assessment. The purpose of this study is to analyze mineral potential using weight of evidence model and a Geographic Information System (GIS) environment to identify areas that have not been subjected to the same degree of exploration. For this, a variety of spatial geological data were compiled, evaluated and integrated to produce a map of potential mineral in the Gangreung area, Korea. for this, a spatial database considering mineral deposit, topographic, geologic, geophysical and geochemical data was constructed for the study area using a GIS. The used mineral deposits were non-metallic(Kaolin, Porcelainstone, Silicastone, Mica, Nephrite, Limestone and Pyrophyllite) deposits of sedimentary type. The factors relating to mineral deposits were the geological data such as lithology and fault structure, geochemical data, including the abundance of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, Zn, $Cl^-,\;F^-,\;{PO_4}^{3-},\;{NO_2}^-,\;{NO_3}^-,\;SO_{42-}$, Eh, PH and conductivity and geophysical data, including the Bouguer and magnetic anomalies. These factors were used with weight of evidence model to analyze mineral potential. Probability models using the weight of evidence were applied to extract the relationship between mineral deposits and related factors, and the ratio were calculated. Then the potential indices were calculated by summation of the likelihood ratio and mineral potential maps were constructed from Geographic Information System (GIS). The mineral potential maps were then verified by comparison with the known mineral deposit areas. The result showed the 85.66% in prediction accuracy.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.409-418
• /
• 2011

Objectives: The purpose of this study was to compare the microshear bond strength (${\mu}$SBS) and bonding interfaces of two-step total-etching and self-etching adhesive systems to three etch types of dentin either the acid etched, laser etched or laser and acid etched. Materials and Methods: The occlusal dentinal surfaces of thirty human molars were used. They were divided into six groups: group 1, 37% $H_3PO_4$ + Single Bond 2 (3M ESPE); group 2, Er:YAG laser (KEY Laser 3, KaVo) + Single Bond 2; group 3, Er:YAG laser + 37% $H_3PO_4$ + Single Bond 2; group 4, Clearfil SE Primer + Bond (Kuraray); group 5, Er:YAG laser + Clearfil SE Bond; group 6, Er:YAG laser + Clearfil SE Primer + Bond. The samples were subjected to ${\mu}$SBS testing 24 hr after bonding. Also scanning microscopic evaluations were made on the resin-dentin interfaces of six specimens. Results: The ${\mu}$SBS of group 2 was significantly lower than that of groups 1 and 3 in Single Bond 2 (p < 0.05). There were significant differences among the uSBS of groups 4, 5, and 6 in Clearfil SE Bond (p < 0.05). Very short and slender resin tags were observed in groups 2 and 5. Long and slender resin tags and lateral branches of tags were observed in groups 3 and 6. Conclusions: Treatment of dentin surface using phosphoric acid or self-etching primer improved the adhesion of Er:YAG lased dentin.