• Geomechanics and Engineering
• /
• v.18 no.1
• /
• pp.41-48
• /
• 2019

Bending moments in the raft of a pile raft system is affected by pile-pile interaction and pile-raft interaction, amongst other factors. Three-Dimensional finite element program has to be used to evaluate these bending moments. Winkler type analysis is easy to use but it however ignores these interactions. This paper proposes a very simplified and novel method for finding bending moments in raft of a piled raft based on Winkler type where raft is supported on bed of springs considering pile-pile and pile-raft interaction entitled as "Winkler model for piled raft (WMPR)" The pile and raft spring stiffness are based on load share between pile and raft and average pile raft settlement proposed by Randolph (1994). To verify the results of WMPR, raft bending moments are compared with those obtained from PLAXIS 3D software. A total of sixty analysis have Performed varying different parameters. It is found that raft bending moments obtained from WMPR closely match with bending moments obtained from PLAXIS 3D. A comparison of bending moments ignoring any interaction in Winkler model is also made with PLAXIS-3D, which results in large difference of bending moments. Finally, bending moment results from eight different methods are compared with WMPR for a case study. The WMPR, though, a simple method yielded comparable raft bending moments with the most accurate analysis.

• Computers and Concrete
• /
• v.18 no.6
• /
• pp.1113-1134
• /
• 2016

A methodology using neural networks has been proposed for rapid prediction of inelastic bending moments in reinforced concrete continuous beams subjected to service load. The closed form expressions obtained from the trained neural networks take into account cracking in concrete at in-span and at near the internal supports and tension stiffening effect. The expressions predict the inelastic moments (considering the concrete cracking) from the elastic moments (neglecting the concrete cracking) at supports. Three separate neural networks are trained since these have been postulated to represent all the beams having any number of spans. The training, validating, and testing data sets for the neural networks are generated using an analytical-numerical procedure of analysis. The proposed expressions are verified for example beams of different number of spans and cross-section properties and the errors are found to be small. The proposed expressions, at minimal input data and computation effort, yield results that are close to FEM results. The expressions can be used in preliminary every day design as they enable a rapid prediction of inelastic moments and require a computational effort that is a fraction of that required for the available methods in literature.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.498-511
• /
• 2017

This work conducts a validation study for loads analysis of the UH-60A slowed rotor at high advance ratios. The nonlinear flexible multibody dynamics analysis code, DYMORE II, is used with a freewake model for the rotorcraft comprehensive analysis. Wind tunnel test data of airloads and structural loads of a full-scale UH-60A slowed rotor are used for this validation study. This analysis predicts well the thrust reversal phenomenon at the advance ratio of 1.0. The section airloads such as normal forces and pitching moments and the oscillatory blade structural moments in this analysis are compared well or moderately with the measured data, although the higher harmonics components of blade torsion moments are not captured well. This validation study assesses the prediction accuracy and investigates the unique aeromechanics characteristics of a slowed rotor at high advance ratio.

• Journal of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.18-23
• /
• 1982

A new method for calculation of the the dipole moments for trigonal bipyramidal complexes has been developed in this work. Illustrative calculations are performed on a few trigonal bipyramidal complexes with the approximate molecular orbital and the valence bond method. The calculated values of the dipole moments by the approximate molecular orbital method are very close to the experimental values. The calculated dipole moments may be used to predict the geometric structure of trigonal bipyramidal complexes.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.103-110
• /
• 2009

The purpose of this study is to suggest a proper tread of stairs using kinematic factors and moments of the lower-limb joints in the stair decent with the 3 different treads with boimechanical method in ergonomics. 9 subjects (body masses; $59.41{\pm}7.49$, $64.03{\pm}6.65$, $67.26:{\pm}7.58$, heights; $160.50{\pm}6.35$ ages; $31.22{\pm}2.99$; parity; $1.67{\pm}0.71$) participated in three experiments that were divided by physiological symptoms (the early (0-15 weeks), middle (16-27 weeks) and last (18-39 weeks). and they walked at self-selected pace on 4 staircases 3 trials. As extending the pregnancy period, cadence was shorter but cycle time were longer more and more. As extending treads of stair decent during pregnancy, speed, stride lengths and cycle time were increased. As extending the treads of stair decent, hip and ankle moments increased but knee moments decreased in sagittal plane. There were increasing or decreasing of moments by means of treads. These changes may account for relation between the treads of stair and moments in pregnant women. The main changes of pregnant women were joint moments and kinematic factors during pregnancy period because pregnancy makes them physical changes. It is possible that joints have connection with compensation each other to maximize stability and to control gait motion. In conclusion, we suggest that the tread of stair is longer than 26cm tread. and exercise programs to improve muscle activity were necessary where joint moments were small.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.291-298
• /
• 2002

In this study, a numerical analysis f3r the piston secondary dynamics and lubrication characteristics of small refrigeration reciprocating compressors is presented. In general, the length of cylinder in this class of compressors is shortened to diminish the frictional losses of the piston-cylinder system. So, the contacting length between piston and cylinder wall is in variable with the rotating crank angle around the BDC of the reciprocating piston. In the problem formulation of the piston dynamics, the change in bearing length of the piston and all corresponding forces and moments are considered in order to determine the piston trajectory, velocity and acceleration at each step. A Newton-Raphson procedure was employed in solving the secondary dynamic equations of the piston. The developed computer program can be used to calculate the entire piston trajectory and the hydrodynamic forces and moments as functions of crank angle under compressor running conditions. The results explored the effects of the radial clearance, lubricant viscosity, and pin location on the stability of the piston, the oil leakage, and friction losses.

• Structural Engineering and Mechanics
• /
• v.18 no.6
• /
• pp.745-757
• /
• 2004

Lateral-torsional buckling moment resistances of I-shaped stepped beams with continuous lateral top-flange bracing under a single point load on the top flange and negative end moments were investigated. Stepped beam factors and a moment gradient correction factor suggested by Park et al. (2003, 2004) were used to develop new lateral buckling formula for beam designs. From the investigation of finite element analysis (FEA), new lateral buckling formula of beams with singly or doubly stepped member changes and with continuous lateral top-flange bracing subjected to a single point load on top flange and end moments were developed. The new design equation includes the length-to-height ratio factor to account for the increase of lateral-torsional buckling moment resistance as the increase of length-to-height ratio of stepped beams. The calculation examples for obtaining lateral-torsional buckling moment resistance using the new design equation indicate that engineers should easily determine the buckling capacity of the stepped beams.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.90-97
• /
• 2007

This paper describes the development of 6-axis force/moment sensor considered adult weight far an intelligent foot of humanoid robot. In order to walk on uneven terrain safely, the foot should perceive the applied forces Fx, Fy, Fz and moments Mx, My, Mz to itself and control the foot using the forces and moments. The applied forces and moments should be measured from a 6-axis force/moment sensor attached to the foot, which is composed of Fx sensor, Fy sensor, Fz sensor, Mx sensor, My sensor and Mz sensor in a body. Each sensor should get the deferent rated load, because the applied forces and moments to foot in walking are deferent. Therefore, one of the important things in the sensor is to design each sensor with the deferent rated load and the same rated output. In this paper, a 6-axis force/moment sensor (rated load of Fx and Fy are 500Nm and Fz sensor is 1000N, and those of Mx and My are 18Nm, Mz sensor is 8Nm) for perceiving forces and moments in a humanoid robot's foot was developed using many PPBs (parallel plate-beams). The structure of the sensor was newly modeled, and the sensing elements (plate-beams) of the sensor were designed using by ANSYS software (FEM (Finite Element Method) program). Then, a 6-axis force/moment sensor was fabricated by attaching strain-gages on the sensing elements, and the characteristic test of the developed sensor was carried out. The rated outputs from FEM analysis agree well with that from the characteristic test.

• Journal of Distribution Science
• /
• v.18 no.1
• /
• pp.71-83
• /
• 2020

Purpose: Because the energy consumption, economic growth and logistics development are still the heated topics which have attracted many scholars' interests. Therefore, this paper attempts to analyze the effect of logistics development on the economic growth, explore the effect of the economic growth on energy consumption and to discuss the effect of the logistics development on energy intensity. Research design, data and methodology: Using the panel data over the period 2000-2017 of 156 countries and employing the country & year fixed effect model, system generalized method moments and random effect model, the empirical analyses of this propositions are performed. Results: The empirical findings present that the logistics development is positively related to the economic growth. The energy consumption in the t-1 period and economic growth are positively related to the current energy consumption. The logistics development is negatively related to the energy intensity. Meanwhile, the empirical findings also indicate that there is a great difference about these effects among the four sub-samples (low income 18 countries, low middle income 49 countries, upper middle income 44 countries, high income 49 countries). Conclusions: Based on the evidences in this paper provided, we can find that these variables can affect each other.

• Journal of the Korean Statistical Society
• /
• v.12 no.1
• /
• pp.18-23
• /
• 1983

Dwivedi, Srivastava and Hall(1980) derived the first and second moments of generalized ridge estimators. In this paper we consider the $m^{th}$ moment of a generalized ridge estimator and tabulate tis skewness measure.