• Proceedings of the Korean Vacuum Society Conference
• /
• 1994.02a
• /
• pp.107-108
• /
• 1994

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.11a
• /
• pp.60-61
• /
• 1997

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.62-63
• /
• 1998

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.210-220
• /
• 2006

Dense $((Na_{0.5}K_{0.5})_{1-x}Li_x)(Nb_{0.8}Ta_{0.2})O_3$ ceramics were developed by conventional sintering process. The electrical properties of $((Na_{0.5}K_{0.5})_{1-x}Li_x)(Nb_{0.8}Ta_{0.2})O_3$ ceramics were investigated as a function of Li substitution. When the sample sintered at $1100^{\circ}C$ for 4 h with the Substitution of 2 mol% Li, electro-mechanical coupling factor ($k_p$) and piezoelectric coefficient ($d_{33}$) were found to reach the highest values of 0.42 and 210 pC/N, respectively.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.861-864
• /
• 2023

Recently, V2X (vehicle-to-everyting) communication has established itself as an essential technology for cooperative autonomous driving. V2X communication currently includes DSRC (dedicated short range communication) communication technology, which is a WLAN (wireless local area network) based communication technology, and C-V2X (cellular-V2X) communication technology, which is a Cellular-based communication technology. Since these two communication methods are not compatible with each other, various studies and experiments are being conducted to select one of the two communication methods. In the case of C-V2X communication, there are LTE-V2X (long term evolutionV2X) communication technology, which is an initial version, and 5G-V2X communication technology, which is a next-generation version. 5G-V2X communication technology has been completed only until standardization, so LTE-V2X communication technology is mainly used. In this paper, we introduce trends related to various issues in V2X communication, including communication method decisions.

• Journal of Environmental Science International
• /
• v.15 no.3
• /
• pp.271-278
• /
• 2006

To investigate the variations of physico-chemical factors and microbial population, in ten stations at water region of coastal area of Chagwi-Do, Nutritive salts, water temperature, transparency, suspended solid, salinity, COD, DO, pH, heterotrophic bacteria, coliform group and Vibrio spp. were analysed three times in September, November in 2004 and February in 2005. Heterotrophic bacteria in surface water was $3.5X10^1{\sim}1.16X10^3cfu/ml,\;1.0X10^2{\sim}5.2X10^1cfu/ml\;2.0X10^1{\sim}7.6X10^1cfu/ml$ and bottom water counted $7.0X10^2{\sim}1.0X10^3cfu/ml,\;1.4X10^1{\sim}2.5X10^2cfu/ml\;2.0X10^2{\sim}4.2X10^1cfu/ml$ in September, November in 2004 and February in 2005, respectively. The cell number of total coliform bacteria in the surface water amounted to $0{\sim}4.3X10^2cfu/ml,\;0{\sim}6.0X10^1cfu/ml,\;0{\sim}1.0X10^1cfu/ml$ and bottom water amounted $0{\sim}2.2X10^2cfu/ml,\;0{\sim}5.4X0^2cfu/ml,\;0{\sim}2.0X10^1cfu/ml$ in September, November in 2004 and February in 2005, respectively. As for Vibrio spp., the cell number in the surface water was $1.0X10^1{\sim}2.5X10^2cfu/ml,\;1.0X10^1{\sim}2.0X10^1cfu/ml,\;0cfu/ml$ and bottom water counted $1.0X10^1{\sim}5.2X10^2cfu/ml,\;0cfu/ml,\;2.0X10^1cfu/ml$ in September, November in 2004 and February in 2005, respectively.

• Journal of the Chungcheong Mathematical Society
• /
• v.33 no.1
• /
• pp.77-87
• /
• 2020

In this paper, we investigate the stability of a functional equation f(x + 3y) - 5f(x + 2y) + 10f(x + y) - 8f(x) + 5f(x - y) - f(x - 2y) - 2f(-x) - f(2x) + f(-2x) = 0 by using the fixed point theory in the sense of L. Cǎdariu and V. Radu.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.410-415
• /
• 1999

$Ba_{1-x}Sr_xTiO_3$ thin films with various ratio of Sr (X = 0.4, 0.5, 0.6) were grown $Pt/TiN/SiO_2/Si$ subastrate by RF magnetron sputtering deposition. As, Ag, and Cu films were deposited on $Ba_{1-x}Sr_xTiO_3$ thin films as top electrodes by using a thermal evaporator. The electrical properties of $Ba_{1-x}Sr_xTiO_3$ thin films for various compositions were characterized and the physical properties at interface between $Ba_{1-x}Sr_xTiO_3$ thin films and top electrodes were evaluated in terms of the work function difference. At x =0.5, the degradation of capacitance is lower to the other compositions. As negative biasapplied, the specimen with Cu top electrode has board saturation region and low leakage current since work function of Cu is bigger than other electrodes.$ Ba_{0.5}Sr_{0.5}TiO_3$ thin films with Cu top electrode, the dielectric constant was measured to the value of 354 at 1 kHz and the leakage current was obtained to the value of $5.26\times10^{-6}A/cm2$ at the forward bias of 2 V.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.82-87
• /
• 2005

The cathode material, $LiNi_{0.5}Mn_{1.5}O_4$, for high voltage applications of Li-ion batteries exhibits impurity phases due to oxygen deficiency during the high temperature heat treatment. The impurity phase reduces the electrochemical properties of the electrode since the deficiency spinel structure disturbs the lithium ion intercalation and deintercalation. In this study, Cr-substituted $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4(0{\leq}x{\leq}0.05)$ powders are synthesized by a sol-gel method in order to reduce the amount of the impurity phases in the $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4$. Thermal analysis of the cathode material shows that the $LiNi_{0.5}Mn_{1.5}O_4$ without Cr substitution looses $2\%$ of its weight due to oxygen deficiency but the amount of weight loss is diminished when Cr is substituted. XRD analysis also supports the reduction of the impurity phases in the cathode after chromium substitution, suggesting that the improvement of the electrochemical properties such as the capacity retention and electrochemical stability are attributed to the low content of impurity phases in the Cr-substituted $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4.$

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.624-633
• /
• 2002

In order to improve the hydrogen storage capacity and the activation properties of the hydrogen storage alloys, the rare-earth metal alloy series, MmN $i_{4.5}$M $n_{0.5}$Z $r_{x}$(x=0, 0.025, 0.05, 0.1), are prepared by adding excess Zr in MmN $i_{4.5}$M $n_{0.5}$ alloy. The various parts in hydrogen storage vessel consisted of copper pipes reached the setting temperature within 4~5 minutes after heat addition, which indicated that storage vessel had a good heat conductivity required in application. The performance test on storage vessel filled with rare-earth metal alloys of 1000 gr was also conducted after hydrogen charging for 10 min at $18^{\circ}C$ under 10 atm. It showed that the average capacity of discharged hydrogen volume was found to be for $MmNi_{4.5}$ $Mn_{0.5}$ and $MmNi_{4.5}$ $Mn_{x}$ 0.5/$Zr_{samples}$ indicated that the released amount of hydrogen for this $AB_{5}$ type alloys was more than 92 % of theoretic value, and also it was found that the optimum discharging temperature for obtaining an appropriate pressure of 3 atm was determined to be $V^{\circ}C$ for $MmNi_{4.5}$ $Mn_{0.5}$$Zr_{x}$(x=0, 0.025, 0.05, 0.1) hydrogen storage alloys. The released amount of these hydrogen storage samples was 125 $\ell$ , 122.4 $\ell$ and 108.15 $\ell$/kg for $MmNi_{4.5}$ $Mn_{0.5}$ $Zr_{0.025}$ $MmNi_{4.5}$M $n_{0.5}$Z $r_{0.05}$, and MmN $i_{4.5}$ Mn_0.5$Zr_{0}$, at $70^{\circ}C$ respectively. Amount of the 2nd phases increase with increase on Zr contents in $MmNi_{4.5}$$Mn_{0.5}$ $Zr_{ 0.1}$/ alloy. This phenomenon indicates that$ ZrNi_3$ in $MmNi_{4.5}$ $Mn_{0.5}$ $Zr_{x}$ / phase, which shows the maximum storage capacity and the strong resistance to intrinsic degradation, is considered as a proper alloy for hydrogen storage. As the Zr contents increase, the activation time and the plateau pressure decreases and sloping of the plateau pressure increases.creases.eases.s.